KRAMER PT-110 Computer Graphics Video over Twisted Pair Transmitte

INPUT:    1 VGA/UXGA.
OUTPUT:    1 RJ-45 Line out.
MAX. OUTPUT LEVEL:    1.4Vpp.
MAX. RESOLUTION:    WUXGA & 1080p.
S/N RATIO:    80dB.
COUPLING:    AC.
POWER SOURCE:    12V DC, 60mA.
DIMENSIONS:    6cm x 6.5cm x 2.5cm (2.36" x 2.56 x 1“) W, D, H.
WEIGHT:    0.14kg (0.31lbs) approx.
ACCESSORIES:    Power supply.
OPTIONS:    RK-4PT 19" rack adapter.

INPUTS:    8 SMPTE 259M serial video, 75Ω, on BNC connectors; looping analog sync inputs on BNC connectors.
OUTPUTS:    8 reclocked SMPTE 259M outputs, 75Ω, on BNC connectors.
RESOLUTION:    10-bit or 8-bit, automatic according to input resolution.
SWITCHING:    During vertical interval from analog sync.
STANDARDS:    4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
EQUALIZATION:    Automatic for up to 300m for 270Mbps using Belden 8281 cable.
CONTROLS:    22 front panel buttons, RS-232 and RS-485 control interface.
DISPLAY:    Current switcher status on eight 7-segment LEDs. Signal presence for each channel on front panel LEDs.
POWER SOURCE:    Universal, 85-264V AC, 47-440Hz, 25VA max.
DIMENSIONS:    19" x 7" x 1U W, D, H, rack mountable.
WEIGHT:    3.5kg (7.8lbs) approx.
ACCESSORIES:    Power cord.

INPUT:    1 composite video, 1Vpp/75Ω on a BNC connector.
OUTPUT:    1 composite video, 1Vpp/75Ω on a BNC connector.
S/N RATIO:    69dB.
BANDWIDTH(-3dB):    20MHz.
POWER SOURCE:    230V AC, 50/60Hz, (115V AC, USA) 2.3VA.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT:    0.72kg (1.6lbs) approx.
ACCESSORIES:    Power cord.
OPTIONS:    RK-1 19” rack adapter.

INPUT:    1 composite video 1Vpp/75Ω on a BNC connector. 1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3 Vpp/75Ω on a 4-pin connector.
Outputs:    1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector; 1 composite video 1 Vpp/75Ω on a BNC connector.
VIDEO BANDWIDTH (-3dB):    100 MHz. (YC to CV), 5.8 MHz. (CV to YC, PAL).
DIFF GAIN:    0.7% (YC to CV,NTSC).
DIFF. PHASE:    0.15 Deg. (YC to CV, NTSC).
K-FACTOR:    0.05% (YC to CV), 0.5% (CV to YC, NTSC).
LUMA S/N RATIO:    72 dB in both direction, (PAL).
CONTROL:    Two electronic touch switches to select PAL or NTSC operation.
POWER SOURCE:    12V DC, 200mA.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT:    0.64kg (1.4lbs) approx.
ACCESSORIES:    12V DC power supply.
OPTIONS:    RK-1 19” rack adapter.

INPUT: 4-pinterminalblock. OUTPUTS:s-Video,1-Vpp/75ohm; (Y), 0.3Vpp/75ohm;(c)ona4pconnector. VIDEO BAND WIDTH (-3dB):8.4MHz,(Y)at100m.GAIN RANGE:-2.4to+6.5dB(Y),-2.7to15.6dB,(EQ.),-5.8to+7.8dB(C). NON-LINEARITY: 0.07%.DIFF.GAIN:0.04%.VIDEO S/NRATIO: Better than 60dB. POWER SOURCE: 12VDC40mA. DIMENSIONS:12cmx7.5cmx2.5cm(4.7”x2.95”x0.98”,W,D,H.). WEIGHT: 0.26kg.(0.58lbs.)Approx. ACCESSORIES: Power supply, mounting bracket.  OPTIONS: ModelVA-50Ppower supply with six12VDCoutlets.RK-T1,RK-T3,19”rack adapters

INPUTS:    4 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors.
OUTPUT:    1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
BANDWIDTH (-3dB):    400MHz (Y).
SWITCHING SYSTEM:    Mechanical, break-before-make.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.3kg (0.25lbs) approx.
ACCESSORIES:    Mounting bracket.
OPTIONS:    RK-3T 19” rack adapter.