The AH210 enclosures are loaded with a high performance 10” woofer and a 1” compression driver and is capable of delivering an inspiring performance to crowds of around 200 people and delivers 200W + 200W of crystal clear output.The AH210 6 channel mixer section features an on-board Media player capable or taking an SD card […]
The AH210 enclosures are loaded with a high performance 10” woofer and a 1” compression driver and is capable of delivering an inspiring performance to crowds of around 200 people and delivers 200W + 200W of crystal clear output.The AH210 6 channel mixer section features an on-board Media player capable or taking an SD card or a USB memory stick and is fitted with Blue tooth as standard so it works with any blue tooth audio device. So stream your favourite music straight from your phone. Equipped with XLR Mic inputs, RCSA inputs, Jack line inputs and a mini-jack inputs the mixer section has got it all covered and each MICchannel has Bass & Treble EQ as well as Echo.The AH210ʼs mixer section features Phantom power should it be required.
Weight
8.00 kg
Reviews
There are no reviews yet.
Be the first to review “LANEY AH-210 Portable PA System 200 Watts 2 x 200W” Cancel reply
The AH210 enclosures are loaded with a high performance 10” woofer and a 1” compression driver and is capable of delivering an inspiring performance to crowds of around 200 people and delivers 200W + 200W of crystal clear output.The AH210 6 channel mixer section features an on-board Media player capable or taking an SD card or a USB memory stick and is fitted with Blue tooth as standard so it works with any blue tooth audio device. So stream your favourite music straight from your phone. Equipped with XLR Mic inputs, RCSA inputs, Jack line inputs and a mini-jack inputs the mixer section has got it all covered and each MICchannel has Bass & Treble EQ as well as Echo.The AH210ʼs mixer section features Phantom power should it be required.
The first truly portable array, the compact CURV 500 is fully scalable with up to four interlocking aluminium unibody satellites operating on a SmartLink® plug and play adapter. Measuring 12 x 12 cm only, the array elements feature LD Systems' WaveAhead® technology with single 4" and triple 1" drivers each for high definition audio with powerful punch and superb balance.
The ported 10" subwoofer base includes the CURV 500's class D amplification with limiter, short circuit, thermal and overcurrent protection and a 4-channel mixer with 16 digital effect presets and Bluetooth® technology. It sports comprehensive connectivity on combo and speakON compatible connectors, 4 digital system presets, an M20 pole mount and 3 ergonomic handles for easy portability. Available in 3 sets for both live and installed sound applications LD Systems' lightweight CURV 500 provides extended vertical and horizontal coverage and impressive all-in-one convenience.
CURV 500 PS:Delivering 920 watts RMS and a peak SPL of 134 dB the CURV 500 Power Set includes 2 SmartLink® adapters plus 2 loudspeaker poles and cables.
Model name: LDCURV500PS
Type: Portable Array System
Rated System Power (RMS): 920 W
Number of Array Satellites: 8
Number of Smartlink® Adapters: 2
Number of Subwoofers: 2
Max. SPL (continuous): 128 dB
Max. SPL (peak): 134 dB
Subwoofer: 10" bass reflex
Satellite: MF: 1 x 4" / HF: 3 x 1" with WaveAhead® Technology / 16 ohms
Frequency response: 47 Hz - 20 kHz
Dispersion (H x V): 110° horizontal, 10° vertical per satellite
Amplifi cation: Class D
Power Output (RMS/Peak): Subwoofer: 300 W / 1200 W, Array Satellites: 2 x 160 W / 2 x 640 W ; Subwoofer Extension: 300 W / 1200 W
Protection: DSP based multiband-limiter, Short Circuit, Overheating, Over-current
Subwoofer Indicators: Signal, Limit, Bluetooth®, Power
Subwoofer Connectors: 1x Mic/Hi-Z (XLR/6,3mm Jack Combo), 1x Mic (XLR/6,3mm Jack Combo), 2x Line (XLR/6,3mm Jack Combo), 3,5mm Jack, 2 x Array Satellite Out (Speakon compatible), Line Out (XLR), System Out (5-pin XLR)
Subwoofer Material: Plywood
Subwoofer Surface: PA Painting
Array Satellite Features: WaveAhead® Technology, internal crossover, metal grille
Array Satellite Material: Diecast Aluminium
Array Satellite Surface: Powder coating
Smartlink® Adapter Features: dual 16 mm fl ange, 2x M6 thread for optional wall mount
Subwoofer Dimensions (W x H x D): 325 x 383 x 491 mm
Array Satellite Dimensions (W x H x D): 122 x 122 x 122 mm
Smartlink® Adapter Dimensions (W x H x D): 122 x 57 x 122 mm
Subwoofer Weight: 16.5 kg
Array Satellite Weight: 1.7 kg
Smartlink® Adapter Weight: 0.6 kg
The 5-channel Behringer EUROPORT PPA200 features quality sound in a compact, portable briefcase-style 200-watt PA system that is designed to be fast and easy to set up. Intended for corporate events, seminars, working musicians and more, the EUROPORT PPA200 comes with compact speakers that each contain a 4" woofer and a 1" tweeter. It has inputs for 2 microphones, an mp3 player, or up to 5 musical instruments.
The unit also features a KLARK TEKNIK effects processor with 100 presets including reverb, chorus, flanger, delay, pitch shifter and more. The FBQ Feedback Detection System is designed to reveal frequencies that are causing feedback so they can then be attenuated with the built-in stereo 7-band graphic EQ.
The EUROPORT PPA200 is also "wireless-ready" for use with the Behringer ULM digital wireless microphones (not included). The package also comes with a BEHRINGER XM1800S microphone, mic clip and 20' cable.
Compact speakers each contain 4" woofer and a 1" tweeter, 17 mm stand insert suitable for use with standard microphone stand and come with 12' cables Two "Invisible" mic preamps with phantom power for condenser microphones, 1 mic/inst channel and 1 stereo channel with separate Aux input Switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy savings
Behringer PPA200 specs
USA/Canada: 100-120 V~, 50/60 Hz (T3.15 A H 250 V)
Japan: 100 V~, 50/60 Hz (T3.15 A H 250 V)
UK/Australia/Europe/Korea/China: 220-240 V~, 50/60 Hz (T3.15 A H 250 V)
Power consumption @ 1/8 rated power: 45 W
Mains connection: Standard IEC receptacle
Dimensions
13.4 x 24.1 x 7.3" (339 x 613 x 186 mm)
Weight
26.5 lb (12.0 kg)
This kit combines the Electro-Voice EVOLVE 50 Portable 1000W Bluetooth-Enabled Subwoofer with the Evolve 50 Column Speaker to create a lightweight, active PA setup designed to provide high-powered, wide-range frequency reproduction for sound engineers, presenters, and DJs in clubs, parties, concert venues, and live stage events. The kit includes the powered subwoofer, magnetic speaker pole, column array speaker, power cord, and carry bag for the speaker pole and column array.
Electro-Voice EVOLVE 50 Portable 1000W Bluetooth-Enabled Subwoofer (Black)
The black Electro-Voice EVOLVE 50 Portable 1000W Bluetooth-Enabled Subwoofer is part of the EVOLVE 50 portable PA system, which consists of a powered subwoofer, magnetic speaker pole, and a column array full-range speaker. The powered subwoofer utilizes a 12" driver and is powered by the integrated 1000W (500W to subwoofer) amplifier, which combines with the column array to provide a frequency response of 43 Hz to 20 kHz with a maximum SPL output of 127 dB.
System setup is simple and fast. Slide the magnetically locking mounting pole into the appropriate hole on top of the subwoofer, then place the column speaker array on the pole. You don\'t have to run cables between the sub and speaker array; audio connectivity between them is made via internal cabling in the mounting pole. The EVOLVE 50 subwoofer features mic and line inputs via XLR-1/4" combo jacks, stereo RCA and 3.5mm aux input jacks, and XLR thru and mix outputs. It is Bluetooth-enabled to allow wireless streaming of music from your smartphone or tablet. The on-board DSP functions, including mode presets, 3-band EQ, sub level, and more, can be adjusted via the sub\'s rear-panel LCD display or a Bluetooth-connected mobile device. The Electro-Voice EVOLVE 50 ships with a power cord.
EV QuickSmart Mobile application: Quickly and wirelessly configure, control, and monitor up to six EVOLVE 50 systems simultaneously, and receive immediate notification during critical performance conditions
High-quality Bluetooth audio streaming for background music or musical accompaniment
QuickSmartDSP provides high-quality processing via EV\'s signature single-knob user interface with LCD
Ideal for portable applications. Lightweight and intuitive assembly via the magnet assisted sub pole make a quality performance easier than ever
Electro-Voice EVOLVE 50 Portable PA Column Array (Black)
The black Electro-Voice EVOLVE 50 Portable PA Column Array is part of the EVOLVE 50 portable PA system, which consists of a powered subwoofer, magnetic speaker pole, and the column array. The column array utilizes eight 3.5" neodymium drivers with a custom-designed waveguide, which provides consistent (120°) horizontal coverage. The column speaker array is powered by the subwoofer\'s integrated 1000W amplifier, which delivers 500W to the column array.
System setup is simple and fast. Slide the magnetically locking mounting pole into the appropriate hole on top of the subwoofer, then place the column speaker array on the pole. You don\'t have to run cables between the sub and speaker array; audio connectivity between them is made via internal cabling in the mounting pole. The column array ships with the sub pole and a carrying case.
Ultra-wide 120° horizontal coverage via custom-designed waveguides and array-formed 40° asymmetrical vertical coverage means all acoustical energy is directed towards both sitting and standing audiences
Ideal for portable applications. Lightweight and intuitive assembly via the magnet assisted sub pole make a quality performance easier than ever
Frequency Response
Column array and subwoofer
Frequency Response (-3 dB): 43 Hz to 20 kHz
Frequency Range
Column array and subwoofer
Frequency Range (-10 dB): 37 Hz to 20 kHz
Maximum SPL
Column Array and Subwoofer: 127 dB
Amplifier
Powered Subwoofer: 1000 W total output
LF Channel Rating: 500 W
Crossover
200 Hz
Connectors
2 x XLR/TRS combo jack input
1 x 1/8" / 3.5 mm input
1 x Stereo RCA input
1 x Wireless Bluetooth audio input
1 x XLR Thru output
1 x XLR Mix Out output
Enclosure
Sub: 0.6" / 15.0 mm plywood
Grille
Steel with black powder coat
Color
Black
Power
Power Supply: 100 - 240 VAC, 50/60 Hz, 1.5 A
Current Rating @ 1/8 Power: 0.6 A
Dimensions (H x W x D)
20.9 x 13.6 x 18.5" / 53.1 x 34.5 x 47.0 cm
Weight
44.7 lb / 20.3 kg
The XP308i from Samson is a compact and portable PA system that includes two 2-way speakers and an 8-channel mixer. Designed with mobility in mind, all of the system components connect together into a single case for terrific portability.
Each of the speakers features an 8" woofer and a 1" titanium tweeter, housed inside a durable vented enclosure. The removable 8-channel mixer features a powerful and efficient 300W Class-D amplifier for powerful sound reproduction. It offers 4 mic/line inputs capable of delivering phantom power, as well as 2 stereo inputs. An integrated iPod dock lets you easily drop in an iPod for playing back pre-recorded material. Dual 3.5mm outputs provide convenient monitoring via headphones or additional speakers. RCA outputs let you connect additional speakers or a recorder.
Other useful features of the XP308i include separate bass and treble controls for each input, a music/speech switch for setting system EQ, and an internal effects processor, which can add digital reverb to any mic channel. A 6-segment LED meter with a limit indicator makes it easy to monitor levels at a glance.
Compact and portable design
Pair of 2-way speakers, each with an 8" woofer and 1" titanium tweeter
Powerful and efficient 300W Class-D amplifier
Removable 8-channel mixer with 4 mic/line inputs and 2 stereo inputs
Phantom power available for powering condenser microphones
Integrated iPod dock accommodates most iPod models
RCA and 3.5mm outputs make it easy to connect additional speakers, a recorder, or headphones
Individual bass and treble controls on each input
Music/speech switch for setting system EQ
Internal effects processor for adding reverb to mic channels
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.