LANEY LX-12 Electric Guitar Amplifier

From as clean as you please to as dirty and growly as you want it! We ain't kiddin' neither!
The possibilities are endless with this little guy. This JVM has 2 independent channels with 3 gain stages. A smart footswitch that remembers your settings...great for playing live! There are 2 master volumes that can be recalled by the footswitch as well. The reverb sounds incredible...it really does. Emulated XLR out for recording. You can dial into any sound you desire with this amp. 2 effects loops. You get it all with a Marshall JVM
Marshall JVM 205C Specs:

100W power
All-valve, with 5 x ECC83s, and 4 x EL34s
1x Vintage 12" + 1x Heritage 12" Speaker
2 totally independent, footswitchable channels
Each channel has 3 footswitchable modes (clean,crunch & overdrive)
Footswitchable, studio-quality digital reverb
Independent reverb controls for each channel
2 footswitchable master volumes
2 FX loops, one series, and one parallel
Parallel FX loop is footswitchable on/off
Speaker emulated XLR output
4-way footswitch (with memory) supplied
All switching can be done via MIDI
Made in England

• Hand-built and hand-wired 120-Watt Class A/B amplifier driven by 4 x 6L6 tubes (now fully compatible with EL34 and 5881, etc.)
  
• 2 original 12" BUGERA guitar speakers optimized for tight low-end and modern-vintage mids
  
• Modern 3-channel preamp design (Clean, Crunch, Lead) featuring 4 x 12AX7 valves for boutique clean and face-melting hi-gain tone
  
• Integrated high-class reverb is assignable per channel and has a dedicated Reverb control
  
• Revolutionary INFINIUM Tube Life Multiplier technology:
  
  • Extends the life of your amplifierʼs expensive power valves up to 20 times.
    
  • Provides incredible reliability and consistent tone over the complete lifespan of your valves
    
  • No need for expensive matched valve sets
    
  • Allows you to mix and match any combination of compatible valve types and brands
    
  • Monitors performance of each power tube continuously and displays defective valves to allow for easy and individual replacement

• Fully independent Equalizer sections for each channel with dedicated Bass, Mid and Treble control
  
• Power amp damping switchable (High, Medium, Low) for total sound control
  
• Remote controlled FX Loop with adjustable Send and Return level also serves as Boost function
  
• Heavy-duty footswitch for Channel selection and FX Loop/Boost function included
  
• Line output with dedicated Level control
  
• Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
  
• High-quality components and exceptionally rugged constructionensure long life

AC30HW2 hand-wired combo amp; two Celestion G12M Greenback speakers

The VOX Hand-Wired Series - turret board construction and hand-wiring make this the ultimate amp, with rich versatile voicing and a classic powerful sound.

Key Features and Product Highlights

• Hand-wired turret board construction

• Birch-ply cabinets featuring solid bracing and a natural high frequency diffuser

• All-tube design

• ECC83/12AX7 preamp tubes (x3)

• EL84 power tube quartet

• GZ34 rectifier

• Fitted with matched Ruby Tubes that provide extended dynamic range

• Traditional VOX two-channel design.

• Top Boost and Normal. High and Low inputs for each channel

• The Normal channel provides an additional BRIGHT switch.

• The top boost channel provides a HOT/COOL switch to achieve even more gain

• Master Volume/BYPASS switch completely bypasses the Master Volume section

• OP mode switch cut the amp's Output Power level in half

• Vintage fawn-colored vinyl, reminiscent of the 1960 classic AC30

• Choose either Celestion Alnico Blue or Celestion G12M Greenback

• VFS1 footswitch controlls the Top Boost channel's HOT/COOL switch

• A premium, custom-fit dust cover is included with every model

Output Power: 30 Watts RMS into 8/16 Ohms
Tube Complement: Preamp: ECC83/12AX7 (x3), Power amp: EL84 (x4), Rectifier: GZ34
Speakers: 12" Celestion G12M Green Back (x2); 8 Ohm
Inputs:

NORMAL Channel Jacks: HIGH (x1); LOW (x1)
TOP BOOST Channel Jacks: HIGH (x1); LOW (x1)
FOOT SWITCH Jack

Outputs: POWER OUTPUT Jacks (x2 for external/extension speakers)
Dimensions (W x D x H): 705 x 260 x 550 mm / 27.76 x 10.24 x 21.65 inches
Weight: 30.8 kg / 67.9 lbs.
Included items: Power cable, VFS1 footswitch, Dust cover

Marshall 1974X 18W Handwired Combo Guitar Amplifier

The 1974X is an authentic re-issue of the fabled model 1974 combo of the late sixties (1966-1968). Just like the original, it boasts a point-to-point, handwired, tagboard circuit housed in an aluminium chassis, plus a valve-driven tremolo circuit. At the very heart of its simple, but effective, two channel design can be found six valves: three ECC83s in the preamp, an EZ81 rectifier and a pair of cathode biased EL84s in the power stage. As the output and mains transformers are vital components in any amplifier as they influence performance, sound and feel, Marshall worked extremely closely with their associates at Dagnall in order to duplicate the original, "off-the-shelf" transformers in all areas.

Another major contributing factor to the distinctive sound of vintage 1974 combos is the way the original 20 Watt, ceramic magnet, Celestion Greenback T1221 loudspeaker's tone has softened with age.

In order to recreate the gorgeously smooth tones of a 35-year-old vintage Greenback, Celestion not only revisited the 1967 recipe for the speaker, they also came up with a proprietary way of "aging" the speakers so they sound and feel like the originals made in the late '60s! The same exact, exclusive "aged" T1221 Greenback speaker is also found in the 1974CX, a 1x12" extension cabinet for the 1974X.