Content |
The SR-S4L is a two-way line array speaker ideal for long distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | Sensitivity | 94 dB (1 W, 1 m) | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | Crossover Frequency | 3,500 Hz | Directivity Angle | Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height) | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | Finish | Enclosure: MDF, white, paint
Front grille: Punched steel plate, white, acrylic paint | Dimensions | 160 (W) × 895 (H) × 255 (D) mm | Weight | 16 kg | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4,
Flying bracket: SR-FB4, Wall mounting bracket: SR-WB4,
Wall tilt bracket: SR-TB4, Stand adapter: SR-SA4,
Protection pad: SR-PP4, Floor stand: SR-FS4,
Digital processor: DP-0206 |
|
The SR-C8S is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode) | Rated Impedance | 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode) | Sensitivity | 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode) | Frequency Response | 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters) | Crossover Frequency | 1,600 Hz (when driven with the optional DP-0206's recommended parameters) | Directivity Angle | Horizontal: 110゜, Vertical: 15゜ | Speaker Component | Low frequency: 20 cm (8) cone-type“
High frequency: Wave front control horn 110゜ (horizontal) × 15゜ (vertical)
+ compression driver × 2 | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm (0.48)“
and Neutrik NL4MP × 2 | Finish | Enclosure: Plywood, black, urethane paint
Front grille: Punched steel plate, black, paint | Dimensions | 526.6 (W) × 293 (H) × 294 (D) mm (20.73 × 11.54" × 11.57“) | Weight | 16 kg (35.27 lb) | Accessory | M8 connection bolt …4 | Option | Cluster bracket: SR-CL8
Rigging frame: SR-RF8
Tilt joint bracket: SR-TP8
Digital processor: DP-0206 |
|
HX-5W
Variable Dispersion Speaker System. Four speaker modules ensure high power and high quality. The changeable orientation of each of the four speaker modules independently allows the directivity angle of the speaker system to be adjusted. Built-in passive network ensures appropriate sound quality. Ideal for both permanent and temporary installations, including both vertical and horizontal positioning. Equipped with a convenient carrying handle. Can be mounted directly on a wall or suspended by wire, chain or shackle with no need to use optional brackets. Optional mounting brackets allow use in a wide variety of applications, including suspension, ceiling mounting, wall mounting, and speaker stand mounting. Mounting procedures are described in the instruction manuals enclosed with the mounting bracket or stand adapter.
Specifications: Enclosure Type Bass Reflex Power Handling Continuous Pink Noise; 200W: Continuous Program; 600WRated Impedance 8ohms Sensitivity (1 W, 1m) 96 dB (60° mode), 97 dB (45° mode), 98 dB (30° mode), 99 dB (15° mode) Frequency Response(Deviation -10dB) 70 to 20,000 Hz (60° mode) 75 to 20,000 Hz (45° mode) 80 to 20,000 Hz (30° mode) 85 to 20,000 Hz (15° mode) Crossover Frequency 4kHz Directivity Angle Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz), 45° (over 1 .2 kHz), 30° (over 1 .6 kHz), 15° (over 3.2 kHz) variable Speaker Component Low frequency: 12 cm (5“) cone-type x 4 High frequency: Balanced dome-type x 12 Input Terminal Speakon NL4MP x 2 and M4 screw terminal Finish (Enclosure) Polypropylene, white Dimensions 408 (w) x 546 (h) x 342 (d) mm 16 1/16 (w) x 21 1/2 (h) x 13 15/32 (d) inches Weight 16kg Accesory Hanging bracket x 2, Hex. wrench x 1 Options Matching transformer:MT-200,Speaker mounting bracket:HY-PFB, HY-CW1W,HY-WM1W,HY-WM2W,HY-CN1W, Speaker stand adapter:HY-ST1 |
JBL VRX 932LA 12'' 2-way 800W RMS Line Array Loudspeaker System
Key Features :
Constant Curvature Array - The waveguide mounts three compression drivers on a
continuous arc enabling them to work together acoustically as if they were a single driver.
Amplitude Shading- Convenient series of switches on each enclosures that controls
the output of each high frequency section in the array.
Suspension and Rigging.
Dual Angle Pole Socket - JBL's dual angle pole sockets
allow great flexibility in aiming the enclosure.
Differential Drive? Woofer.
Specifications:
Frequency Range
|
:
|
57 Hz - 20 kHz(-10 dB)
|
Frequency Response
|
:
|
75 Hz - 20 Hz (+/-3db)
|
Coverage Pattern
|
:
|
100 x 15 nominal
|
Crossover Modes
|
:
|
4 Ohms Bi-amp / passive,
externally switchable
|
Crossover Frequency
|
:
|
132 dB SPL peak 1.2 kHz
|
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive: 800 W / 1600 W / 3200 W
Bi-amp LF: 800 W / 1600 W / 3200 W
Bi-amp HF 75 W / 150 W / 300 W
|
System Maximum SPL
|
:
|
Passive: 130 dB SPL peak
Bi-amp LF: 130 dB SPL peak
|
System Sensitivity (1w @ 1m
|
:
|
Passive: 95 dB SPL
Bi-amp LF: 95 dB SPL
Bi-amp HF: 114 dB SPL
|
LF Driver
|
:
|
1 x JBL 2262H 305 mm (12 in) neodymium magnet
Differential Drive? with dual
voice-coils and magnetic gaps
|
HF Driver
|
|
3 x JBL 2407J, 25.4 mm (1.0 in)
voice-coil, neodymium magnet
compression driver
|
Nominal Impedance
|
:
|
Passive: 8 ohm
Bi-amp LF: 8 ohm
Bi-amp HF: 8 ohm
|
Active Tunings
|
:
|
Tunings available at www.jblpro.com
|
Enclosure
|
:
|
18 mm, 11-ply birch plywood
|
Suspension / Mounting
|
:
|
120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit
|
Finish
|
:
|
Black DuraFlex? finish
|
Grille
|
:
|
Power coated, black, 16-guage perforated steel with with acoustically transparent foam
|
Input Connectors
|
:
|
Neutrik? Speakon? NL-4 (x2)
|
Dimensions (H x W x D)
|
:
|
349 x 597 x 381 mm
(13.75 x 23.5 x 15.0 in)
|
Net Weight
|
:
|
21.8 kg (48 lb)
|
Optional Accessories
|
:
|
VRX932LA-AF: Suspension array frame
SS2-BK: Tripod speaker stand
SS3-BK: Satellite speaker pole,
41 in (1041 mm)
SS4-BK: Adjustable satellite speaker pole to be used with the SRX718S only
|
|
The VRX932LAP is a powered, lightweight, compact 12" two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital.
Features : | | Specifications : | - Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
| - JBL's exclusive neodymium magned Differential Drive® woofer for high-power capacity and light-weight.
| - VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
| - Constant Curvature waveguide for unprecedented array coherence.
| - Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility.
| - Array Configuration Selector permist "array shading“.
| | |
Power Rating | : | 1750 Watts Peak
875 Watts Continuous |
| Frequency Range | : | 57 Hz - 20 kHz
(-10 dB) |
| Dimensions
(H x W x D) | : | 349 mm x 597 mm x 444 mm
(13.75 in x 23.5 in x 17.5 in) |
| Frequency Response | : | 75 Hz - 20 Hz
(+/-3db) |
| Maximum Peak Output | : | 136 dB SPL at 1m |
| Coverage Pattern | : | 100 x 15 nominal |
| DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance) | : | LF: 750 Watts, HF: 125 Watts |
| DPC-2 Output Sectoin | : | LF: Dual-Bridged Technology™, Class D |
| Autio Input Connector | : | XLR with loop through |
| LF Driver | : | 1 x JBL 2262FF 305 mm (12 in) neodymium magnet |
| HF Driver | : | 3 x JBL 2408J, 38 mm (1.5 in) |
| User Controls | : | Input Attenuator (0-16 dB) |
| Signal Processings | : | DSP based, resident in Input Module |
| AC Power Operating Range | : | 90-132 VAC or 216-264 VAC, 50/60 Hz |
| AC Input Connector | : | Neutrik PowerCon (NAC 3MPA) |
| AC Loop Through Connector | : | Neutrik PowerCon (NAC 3MPB) |
| AC Current Requirements | : | 6A per system at 120V, 3A per system at 240V |
| Enclosure | : | 25/15 mm, 11-ply birch plywood |
| Suspension / Mounting | : | Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting |
| Finish | : | Black DuraFlex™ finish |
| Grille | : | Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam |
| Net Weight | : | 24 kg (52 lb) |
| Optional Accessories | : | VRX-AF: Suspension array frame | | |
|
The SR-S4S is a two-way line array speaker ideal for short distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | Sensitivity | 93 dB (1 W, 1 m) | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | Crossover Frequency | 3,500 Hz | Directivity Angle | Horizontal: 90゜, Vertical: 10゜ | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | Finish | Enclosure: MDF, white, paint
Front grille: Punched steel plate, white, acrylic paint | Dimensions | 160 (W) × 892 (H) × 303 (D) mm | Weight | 16 kg | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4,
Flying bracket: SR-FB4, Wall tilt bracket: SR-TB4,
Stand adapter: SR-SA4, Protection pad: SR-PP4,
Digital processor: DP-0206 |
|
Reviews
There are no reviews yet.