Content |
M1001 is a multipurpose two-way full-range speaker system, suitable in a wide range of installations. The compactness, together with the elegant and neutral design with accurate finishing make M1001 suitable for almost any environment and architectural constraint. Available mounting accessories allow you to use the M1001 wall or ceiling mounted, with reference to the several possible applications. The M1001 has a controlled dispersion and delivers undistorted SPL value above any expectation from such a compact speaker system. The M1001 features high sensitivity thanks to the use of oversized magnets and a comfortable sound quality with smooth and wide frequency response performed thanks to the Kapton diaphragm compression driver loaded on a constant directivity horn. The LICC crossover design includes an electronic protection on high frequency device.
General Specs
High Quality 2-way passive loudspeaker 1 x 10" woofer, vented 1 x 1" driver, on 90°x60° CD horn High Power Handling ‘Low Impedance Compensated Crossover\', with electronic protection for the driver 300W AES power handling Steel Front Grille with robust double mesh polyester clothing Rotatable RCF front logo Installation points are available on the rear panel, top and bottom All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)
Acoustical Specs
Frequency Response -10 dB:60 Hz ÷ 20000 Hz Max SPL @ 1m:128 dB Horizontal coverage angle:90° Vertical coverage angle:60° Directivity index; Q:10 System Sensitivity:97 dB Nominal Impedance:8 Ω Power Handling:300 W Peak Power Handling:1200 W Recommended Amplifier:600 W Protections:Dynamic Crossover frequencies:1700 Hz
Inputs/Outputs
Input connector:4-pin EUROBLOCK Height:500 / 19.68 mm/inch Width:265/ 10.43 mm/inch Depth:320 / 12.60 mm/inch Net Weight:13.2 / 29.08 kg/lbs |
Features
Hard-suspension bass with Kapton spool
High-range horn with thermal overload protection
Integrated high-quality frequency cross-over (not for RSP-18 S)
Sound characteristics geared especially to heavy-bass sounds like hip hop, techno, house & breaks
High-performance reserves
Extremely durable, road-compatible carpeting
Protective metal corners
Large carrying shells made of metal
Sunk-in metal flange for tripods (not RSP-12 M and RSP-30)
Robust front grid
Connections via PA pro speaker cable and 6.3 mm jack
Technical Data
100 watt RMS PA-speaker
Max. capacity: 200 watt
Type: 2-way system
Frequency range: 45 Hz - 20 kHz
Acoustic pressure: 97 dB
Speaker: 25 cm (10“) woofer, mid-range and tweeter
Impedance: 8 ohm
Dimensions: 530 x 375 x 340 mm
Weight: 11.5 kg
|
The CBR10 is the most compact model in its series. While delivering astonishing power for its size and weight, the CBR10 is ideal for both portable and installed applications. |
- 38 Hz to 17 kHz frequency range
(-10 dB) - 250W pink noise, 500 watts continuous program power capacity
- 120 x 110 degree coverage horn
- 150W, 75W, 38W at 70V/100V (plus 19W tap at 70V only)
- 4 Ohm Bypass
- Outdoor-rated screw down input terminal strip (with MTC-PC2 sealed entrance cover)
- Available in black or white (Control 30-WH)
- Dimensions (HxWxD): 593 mm x 372 mm x 345 mm (23.3 in x 14.6 in x 13.5 in)
- Net Weight: 18.9 kg (42 lb)
|
LD Systems MIX 10 G3
Passive 2-Way Slave Loudspeaker for LD Systems MIX 10 A G3
This passive 2-way loudspeaker has been designed as a companion to the active MIX 10 A G3 for small-scale PA and personal monitoring applications. It features the same 10" custom woofer and 1" Celestion HF driver complement, 65 Hz to 20 kHz frequency response and 80° x 70° dispersion delivering crystal clear sound with punch and detail.
The compact bass reflex enclosure is constructed with tough birch plywood sporting a speakON-compatible input, 50° monitor angle and Dual-Tilt pole receptacle for 0° or 5° mounting angles. In a master-and-slave setup with the active unit , the MIX 10 G3 provides amazing performance and versatility in a lightweight, easily portable package.
Product type |
PA loudspeaker |
Type |
passive |
Low/mid driver dimensions |
10 " |
Woofer size |
254 mm |
Woofer magnet |
Ferrite |
Woofer brand |
Custom-made |
Woofer voice coil |
2 " |
Woofer voice coil (mm) |
50.8 mm |
Horn |
CD horn |
HF driver dimensions |
1 " |
HF driver size |
25.4 mm |
HF driver magnet |
Ferrite |
HF driver brand |
Celestion |
HF driver voice coil |
1 " |
HF driver voice coil |
25.4 mm |
Dispersion (H x V) |
80 x 70 ° |
Load rating (RMS) |
200 W |
Peak power |
400 W |
Frequency response |
65 - 20.000 Hz |
SPL (1W/1m) |
95 dB |
Max. SPL |
121 dB |
Impedance |
4 Ohm(s) |
Protection circuits |
HF Driver |
Loudspeaker inputs |
1 |
Speaker input connections |
Speakon compatible |
Cabinet material |
16 mm Plywood |
Cabinet surface |
PA painting |
Cabinet construction |
Bass Reflex |
Monitor angle |
50 ° |
Width |
315 mm |
Height |
489 mm |
Depth |
307 mm |
Features |
dual-tilt flange (0°/5°), Ergonomic handle |
Weight |
10,8 kg |
| The PS-10 JB-Systems is a compact passive speaker with a woofer 10 "is the perfect choice for small applications where high power is not necessary. It is a versatile device that can be used in different installations, there is even a special holder designed for use as a monitor.
JB-Systems Specification PS-10:
This enclosure is suitable for fixed installation and mobile application, the rugged polypropylene housing provides excellent protection components. SP-10 can be mounted on a stand with a standard speaker connection 35mm and can be mounted easily using the integrated mounting points. And as mentioned earlier, you can use the stand included for use as a monitor. This device also has a sturdy handle for easy transport and rubber feet protect the bottom of your speaker.
- passive Speaker
- 10 "woofer
- 1.35 "compression driver
- Power: 160W RMS, 320W peak
- Impedance: 8 Ohm
- Speakon In / Out
- polypropylene housing
- sturdy handle
- Rubber feet
- Can be mounted on standard stand (35mm)
- Points integrated mounting
- Supplied with bracket for use as a monitor
- Weight: 10.3kg
|
Reviews
There are no reviews yet.