RCF M501 2-way Passive speaker – 5.5″ – 1″ – 90×90°horn – 80W

M 501 is a multipurpose two-way full-range speaker system, suitable in a wide range of installations.
The compactness, together with the elegant and neutral design with accurate finishing make M 501 suitable for almost any environment and architectural constraint. Its comfortable sound helps heavily in the near field applications.
Available mounting accessories allow you to use the M 501 wall or ceiling mounted, with reference to the several possible applications. The SPL and the level of undistorted sound the M501 can reach are far above any expectation from such a compact solution.
The M 501 features high sensitivity typical of the PRO audio cabinets thanks to the use of oversized magnets and an HI-FI sound quality with smooth and wide frequency response performed thanks to the wave-guided titanium dome tweeter.
The LICC crossover design includes a protection on high frequency device

• • Multimedia Environments
• • Conference Halls
• • Pubs
• • Café
• • Background and Foreground Business Music
• • Delay Fill
• • Place of Worships
• • PA Systems

General Specs

• High Quality 2-way passive loudspeaker
• 1 x 5.5" woofer, vented
• 1 x 1" in driver, on 90°x90° CD horn
• High Power Handling ‘Low Impedance Compensated Crossover\', with electronic protection for the driver
• 80W AES power handling
• Steel Front Grille with robust double mesh polyester clothing
• Rotatable RCF front logo
• Installation points are available on the rear panel, top and bottom
• All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)

Acoustical Specs

• Frequency Response -10 dB:80Hz ÷ 20000 Hz
• Max SPL @ 1m:114dB
• Horizontal coverage angle:90°
• Vertical coverage angle:90°
• Directivity index; Q:10
• System Sensitivity:89dB
• Nominal Impedance:8Ω
• Power Handling:80W
• Peak Power Handling:320W
• Recommended Amplifier:160W
• Protections:PTC
• Crossover frequencies:1900Hz

Cabinet Specs

• Cabinet Material:MDF 12 mm
• Hardware:6 x M6, 2 x M10
• Grille:Steel, with a robust double mesh polyester clothing
• Colour:Black

Size/Weight

• Height:303 / 11.92mm/inch
• Width:175 / 6.88mm/inch
• Depth:185 / 7.28mm/inch
• Net Weight:5 / 11kg/lbs

System Parameters

• Compression Driver:1" HFdriver, 1" voice coil
• Nominal Impedance:8Ω
• Input Power Rating:10W AES
• Sensitivity:90dB
• Woofer:5" Woofer, 1.2" voice coil
• Nominal Impedance:8Ω
• Input Power Rating:80W AES
• Sensitivity:87dB

Behringer 1C 100W-4Ω Monitor Speakers

• Multi-purpose 2-way studio monitors ideally suited for fixed installation, multimedia, home recording studio, audio/video production and surround-sound systems
• High power handling capability (100 W / IEC268-5) produces full-range output with extremely low distortion
• Powerful 5 ½" woofer with extremely light-weight cellulose cone and high-resolution ½" tweeter
• Ultra-linear frequency range from 60 Hz to 23 kHz
• Phase-optimized and high-precision crossover for absolute phase linearity
• Auto-overload protection prevents tweeter damage and resets automatically
• Bracket for wall/ceiling mounting included
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

Introducing the Stylish MONITOR 1C-BK Monitor Speakers from BEHRINGER

The MONITOR 1C-BK 2-way monitor speakers offer accurate sound reproduction combined with a great design to suit your fixed installations, stereo and surround applications, home recording studios as well as audio and video productions.

Each of these 100-Watt speakers has a powerful 5 ½" woofer with a lightweight cellulose cone, a high-resolution ½" tweeter plus a phase-optimized high-precision crossover for absolute phase linearity and auto-overload protection that resets automatically. The result: full-power, ultra-linear frequency response ranging from 60 Hz all the way up to 23 kHz. They come with convenient mounting brackets for easy installation.

Looking for great sound and style? The MONITOR 1C-BK speaker definitely got it!

SPECIFICATIONS
Connector type Clip terminal
Wire diameter Power capacity (prg.) 100 W (IEC 268-5)
Impedance 4 Ω
Frequency range 60 Hz to 23 kHz (-10 dB)
Nominal sound pressure level (SPL) 86 dB*W/m (program, bandwidth 100 - 5000 Hz on axis, full space)
Max. short term acoustic output 112 dB @ 1m (on axis, half space)
Tweeter ½“
Woofer 5 ½“
Crossover frequency 5000 Hz
Dimensions (H x W x D) 8.9" x 5.9" x 5.6" (225 x 150 x 142 mm)
Weight approx. 4 lbs each (1.8 kg each)

The AC15 is an ultra-compact, fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and be visually unobtrusive.  The enclosure design allows for installation very close to walls and ceilings, making it ideal for installation under balconies, columns, or for wall mounting.  The high frequency device is a 1" dome tweeter integrated
into a 90° x 90° waveguide that provides even coverage throughout the intended usage area.  The AC15 utilizes a 5.25" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 1.5" voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount® type bracket.  The plywood enclosure features JBLʼs DuraFlex™ finish and comes with a powder coated steel, foam-backed grille.

Features:
1" Dome Tweeter with 90° x 90° Coverage.
5.25" (135 mm) LF transducer
Ultra compact enclosure
300W Program Power
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket

Specifications:
Frequency Range (-10 dB): 80 Hz -20 kHz
Frequency Response (±3 dB): 90 Hz -18 kHz
Power Rating:
150W Cont. Pink Noise
300W Program
600W Peak
Impedance: 16 Ohms
Coverage Pattern: 90° x 90°
Dimensions: 9.5" H x 5.9" W x 7" D (241.3 x150.3 x 177.8mm)
Weight: 10.5 lbs. (4.7 kg)

maximum sound-level pressure of 108 dB. The LD SAT242G2 is rated for 100 W continuous power can can be used alone as a full-range speaker or with a subwoofer in the in the LD installation series for bass expansion.

Premium in-wall speaker designed for applications where top performance is required. The high performance 6-1/2 inch woofer features a polymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other multidirectional tweeter designs.

Features:

• Frequency Response: 38 Hz - 20 kHz
• 100W continuous program (50W cont. pink, 200W cont.peak)
• 88 dB sensitivity (1W/1m)
• High-slope crossover network produces natural sound and even coverage.
• Optional MTC-126RIF Rough-In-Frame for new construction installation to wallstuds.

The SR-H2S Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.

Specification  Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Ω
Sensitivity 90 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 90 - 17,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜, Vertical: 20゜
Speaker Component 7 cm (2.8“) cone-type × 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 663.4 (H) × 115 (D) mm (3.31" × 26.12" × 4.53“)
Weight 4.2 kg (9.26 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206