MACKIE C300z 12″ 2-Way Compact Passive SR Loudspeaker

• Frequency Response (-3 dB): 55Hz - 18kHz
• Frequency Range (-10 dB): 45Hz - 20kHz
• Maximum SPL Long-term @ 1m: 123dB
• Crossover Frequency: 1800 Hz
• Input Type: Speakon-style NL4 jack 1/4-inch TS phone jack
• Input Impedance: 8 ohms
• Power Handling: (RMS) 300 watts, (peak) 750 watts

Features

    * DVX3121 12" LF Transducer with forced air cooling
    * ND2 2" Voice Coil, 1" Exit Neodymium CompressionDriver
    * 60° x 60° Coverage Pattern
    * 600W Continuous (2400W peak) power handling
    * High sensitivity, 131 dB maximum SPL
    * Adjustable monitor angle (45° or 55°)
    * 2 Anchor plates for single stud fittings and 7integral suspension points
    * Available in black or white
    * Passive/biamp selectable
    * Full line of accessories

Specifications

    * Frequency Response (-3dB): 58Hz-15kHz
    * Frequency Range (-10dB): 48Hz-20kHz
    * Rec. Hipass Frequency: 50Hz
    * Axial Sensitivity: 97dB (1W/1m)
    * Max. Calculated SPL: 131 dB
    * Horizontal Coverage: 60°
    * Vertical Coverage: 60°
    * Power Handling (Passive): 600W continuous, 1200Wprogram, 2400W peak
    * LF Power Handling (Biamp): 500W continuous, 1000Wprogram, 2000W peak
    * HF Power Handling (Biamp): 40W continuous, 80Wprogram, 160W peak
    * LF Transducer: DVX3121, 12" driver
    * HF Transducer: ND2, 1" exit Neodymium compressiondriver
    * Crossover Frequency: 2kHz
    * Nominal Impedance: 8 ohms
    * Minimum Impedance: 6.2 ohms
    * Connectors: (2) Neutrik Speakon NL4\'s
    * Enclosure Material: Polypropylene structural foam
    * Suspension: Enclosure has locations for 4 single-studattachment plates and10 forged steel eyebolts - 2 on top, 2 on bottom, 2 onside, and 1 on rear ofenclosure
    * Grille: Polyester powder coated, 16GA Galvanizedsteel, with rotatable logo
    * Dimensions (H x W x D): 24.14" x 15.64" x 14.26“
    * Net Weight: 43.7 lbs
    * Shipping Weight: 48.6 lbs

With the newly designed D12-3, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust high-performance professional 12" 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12-3 is also ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.

Cabinet Full-Range Configuration Passive 3-Way Nominal impedance 8 Ohms Rated power RMS 350 Watts Program power 700 Watts Peak power 1400 Watts SPL 2,83 V / 1m 1W / 8 Ohm 100 dB Max. SPL 1m (calculated) 128 dB Frequency range ( -10dB ) Full range 70 Hz - 20kHz Coverage angle 1 kHz -6dB 120° Conical Coverage angle 10kHz -6dB 90° * 50° Passive crossover frequency 700Hz, 4kHz Voice coil tracking protection Yes Component HIGH Electro-Voice DH-3 Order No. 353 078 Component MID DYNACORD DND 6120 Neodymium Order No. 366 302 Component LOW Electro-Voice DL12BFH Order No. 358 288 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) mm 430 x 586 x 321 Shipping weight 20 kg Net weight 19 kg Enclosure material Heavy Duty Polypropylene Finish Black Grille Powder coated steel, Acoustic foam Handles 1

With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fi xed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffl e by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.

Cabinet Full-Range Configuration Passive 2-Way Nominal Impendance 8 ohms Rated power RMS 300 W Program power 600 W Peak power 1200 W SPL 2,83V / 1m (1W/8 ohms) 98 dB Max. SPL 1m (calc. with peak) 129 dB Frequency range (-10dB) 70Hz - 18 kHz Nominal Coverage angle 80° x 40° Passive crossover frequency 1,5 kHz Voice ceil tracking protection Yes Component High ND2 S-8 Component Low DL 12 BFH Connectors 1+/1- Wired through 2+/2- Connector model Speakon 2x NL4 MPR Dimensons (WxHxD) mm 429,5 x 596 x 320,5 Shipping weight 17 kg Net weight 16 kg Enclosure material Polypropylene Finish Black Grille, Steel Powder coated Front b/w Acoustic Foam Handles 1

12-inch Two-Way Passive 90 x 50, 600W Loudspeaker System

• DVX3121 12 LF Transducer with Forced Air Cooling ND2 2 Voice Coil, 1 Exit Neodymium Compression Driver 90 x 50 Coverage Pattern 600W Continuous (2400W Peak) Power Handling High Sensitivity, 131 dB Maximum SPL Adjustable Monitor Angle (45 or 55) 2 Anchor Plates for Single Stud Fittings and 7 Integral Suspension Points Available in Black or White Passive/Biamp Selectable Full Line of AccessoriesThe Electro-Voice Zx3 is the new standard of no compromise audioperformance and versatility in a simple to use, compact package.At its heart are the transducers. First is the DVX3121 high performancelow frequency transducer. EV used advanced computer aided designtechniques to create forced air, directional voice coil cooling for highpower and efficiency. Finite element analysis was used to optimize thesuspension and magnetic structure for long, linear travel to provide lowdistortion and greater LF extension. These features and details, suchas forged magnetic components and special materials, provide reliabilitywith a 500W power rating in a lightweight transducer. Next is theND2, a 2-inch voice coil compression driver based on neodymium motorstructure to allow for maximum output while reducing size and weight toa minimum. Its precision phasing plug and titanium diaphragm providebetter HF performance, while the integral heatsink provides cooling forhigh power output.The high tech enclosure uses injection-molded high-impact polypropylenestructural foam to make the Zx3 incredibly durable. The enclosuregeometry elements have been carefully designed to provide maximumrigidity and bass response. By design the Zx3 is also a perfect solutionfor stage monitors by allowing two angles (45 or 55) without any additionalaccessories.Two coverage patterns are available; 60 x 60 coverage for long-throwand cluster applications, 90 x 50 coverage for wider coverage or shorterdistances.The Zx3 is equipped with two anchor plates for rigging with single studfittings,along with two more possible anchor plate attachment points onthe bottom. For permanent suspension or attaching brackets, the Zx3also has two M8 inserts on the top and bottom, two under the handle,and one on the back of the enclosure, for a total of 7. All versions areavailable in black or white.
• Freq. Response1 (-3 dB): 58 Hz - 15 kHz
• Freq. Range1 (-10 dB): 48 Hz - 20 kHz
• Rec. Hipass Frequency: 50 Hz
• Axial Sensitivity1: 97 dB (1W/1m)
• Max. Calculated SPL: 131 dB
• Horizontal Coverage: 90
• Vertical Coverage: 50
• Power Handling (Passive): 600W Continuous, 2400W Peak
• LF Power Handling (Biamp): 500W Continuous, 2000W Peak
• HF Power Handling (Biamp): 40W Continuous, 160W Peak
• LF Transducer: DVX3121, 12 in (305mm) Driver
• HF Transducer: ND2, 1 in (25.4mm) exit Neodymium
• Compression Driver
• Crossover Frequency: 2 kHz
• Nominal Impedance: 8 Ohms
• Minimum Impedance: 6.2 Ohms
• Connectors: (2) Neutrik Speakon NL4s
• Enclosure Material: Polypropylene Structural Foam
• Suspension: Enclosure has locations for 4 Single-Stud
• Attachment Plates and 10 Forged Steel
• Eyebolts - 2 on Top, 2 on Bottom, 2 on
• Side, and 1 on Rear of Enclosure
• Grille: Polyester Powder Coated, 16GA
• Galvanized Steel, with Rotatable Logo
• Dimensions (H x W x D): 613mm x 397mm x 362mm: (24.14 x 15.64 x 14.26)
• Net Weight: 19.8 kg (43.7 lbs)
• Shipping Weight: 22.1 kg (48.6 lbs)

Electro-Voice TX1122 Tour-X 2-Way 12" PA Speaker
The Electro-Voice TX1122 is a high power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required in a lightweight package.

It utilizes the DH3, high output 1.25" titanium compression driver, coupled to a constant directivity 90 degree x 50 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in short to medium throw applications.

The SMX2120 12" woofer has an FEA optimized magnet structure for very low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability.

It has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four-way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1122 to be suspended in a various positions. The recessed input panel with dual NL4 connectors keeps the connectors hidden, while allowing it to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

• Freq. response (-3 dB): 60Hz - 20kHz
• Freq. range (-10 dB): 45Hz - 20kHz
• Rec. Hi-pass frequency: 45Hz
• Axial sensitivity: 97dB (1W/1m)
• Max. calculated SPL: 130dB
• Horizontal coverage: 90 degree
• Vertical coverage: 50 degree
• Power handling: 500W continuous, 2000W peak
• LF transducer: SMX2120, 12" (305mm) driver
• HF transducer: DH3, 1.25" (32mm) diaphragm compression driver
• Crossover frequency: 1750Hz
• Nominal impedance: 8 Ohms
• Minimum impedance: 5.4 Ohms
• Connectors: (2) Neutrik Speakon NL4\'s
• Enclosure material: plywood and MDF with EVCoat
• Grille: 16 GA steel, black powdercoat, with rotatable logo
• Suspension: (6) 3/8" threaded points - (2) on each side and (2) on the rear of enclosure
• Dimensions (H x W x D): 24.3" x 15.0" x 15.0" (616mm x 382mm x 380mm)
• Net weight: 44.5lbs (20.2 kg)
• Shipping weight: 50.0lbs (22.7 kg)