MACKIE THUMP15A Powered loudspeaker 15” 1300W Peak

Equipment: 15" high-performance woofer, 1.4" titanium compression driver     1300 W Class D power (LF: 1000 W, HF: 300 W)     Amplifier with Dynamic Bass Response technology for fast transient playback and powerful bass     Integrated 2-channel mixing console with Vita Preamps and Wide-Z technology     4 Application-specific speaker modes for various applications     Digital precision crossover     Automatic run-time and phase correction for the speakers     Protection system in case of overload or overheating     Maximum level: 127 dB     Beam angle: 90 ° x 60 °     Frequency response: 32 - 23,000 Hz     XLR Thru output     Universal power supply (100-240VAC)     Integrated high stand flanges     Robust housing for intensive use     Angled at two angles for use as a stage monitor     4 Carrying handles     Dimensions: 686 x 442 x 356 mm     Weight: 15.8 kg     Colour: Black  

Two-way active full range with DSP. 1500W

15'' woofer, 3'' driver, 50 x 40 dispersion.

1000W + 500W class D power amplifier.

Optional: LD2.4 USB interface for remote PC connection.

CV-Spot protective cover. NOTE : SPOT 1500 can not drive the bass cabinet SPOT15B.

Inside our rigid custom designed cabinet is a 15" driver designed exclusively for this project. It's matched with a new 1.75" Titanium high frequency driver, aimed through a 1" diameter horn. The dB500a features 500 watts of clean power (400 watts low frequency/100 watts high frequency) and has a crossover designed for high SPL. Our exclusive Optimax(TM) signal processing circuitry provides total speaker protection but won't cut the low end at high volumes, as similar speakers with sliding filters do.

The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR connectors and level controls. Controls for the selectable low pass filter and Optimax processing are also included.

The dB500a speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.

Specification     Detail
Powered     Yes
Power Configuration     Bi-amped
LF Driver Size     15“
LF Driver Power Amp     500W Class D
HF Driver Size     1.75“
HF Driver Power Amp     500W Class D
Frequency Range     44Hz-20kHz (-10dB)
Crossover Frequency     2kHz
Maximum Peak SPL     133dB
Horizontal Coverage Angle     60 Degrees Axisymmetric
Vertical Coverage Angle     60 Degrees Axisymmetric
Enclosure Material     15mm Birch Plywood
Mounting Options     Pole, Fly
Inputs     1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs     2 x XLR (Direct), 1 x XLR (Line)
Height     32.1“
Width     17.5“
Depth     15.2“
Weight     64 lbs.
Manufacturer Part Number     KW152

GENERAL

The PSA Systems JB-15 is the active variant of the PS-15. This active full range speaker has a built-in amplifier of the bi-amp type and delivers 300 watts RMS. In combination with the active crossover the audio signal is distributed efficiently on a woofer and tweeter. The PSA-15 has a 15-inch woofer, which effortlessly displays the low frequencies, starting at 40Hz. Here he is fed with less than 245 watts. The 1.35-inch compression driver takes it high for his account and get 55 watts of power. This was in fact the RMS power; peaks that are higher are no problem for the amplifier. You are assured of a solid, non-pinched sound.

The PSA-15 has a smooth shaped casing made of polypropylene. A light but very strong type of plastic, which is good for long-term protection of the internal components. In addition, he is very practical, with a built-in carrying handle, M8 mounting points, a 35 mm stand adapter and support for monitor use. The latter is excellent as possible, thanks to the angle of the housing.

The back contains the connections with two microphone inputs (XLR, 6.3 mm jack) and a line input (XLR, RCA). The inputs and outputs are balanced. As per the level can be controlled, there is also a master volume and a two-band tone control devices. The PSA 15 is very suitable for mobile use and permanent installation and can be used as PA speaker and be used as a monitor. Monitor Brackets are included.

he das Audio dr speaker range combine the best of lightweight portability with premium quality sound performance and high output capabilities. The Dr 15a is a very portable self-powered system with an extremely efficient 15" woofer that is capable of a seriously impressive and very punchy bass & mid range output. A custom m-34 compression driver handles high frequency reproduction with a clean, smooth and dynamically transparent clarity. Each driver is powered directly by its own perfectly matched independent amplifier in this bi-amplified active system for maximum efficiency and incredible sound pressure levels. A built-in two-channel mixer comprises both microphone and line inputs, allowing for use in any format, with or without additional mixer or audio sources. Manufactured and designed by das, in Spain, the dr are constructed using the latest in, mechanics, magnetics, acoustics and electronics technology to create speakers that are tough, reliable and capable out performing any rival model their class.

TECHNICAL SPECIFICATIONS:
Mobile DJ, disco, PA or install use
200 Watt active speaker
Nominal LF power amplifier 150 Watt (AB)
Nominal HF power amplifier 50 Watt (AB)
127dB SPL
45Hz - 20kHz frequency range (-dB)
2 way
15" woofe speaker 
1" compression driver 
Female XLR-Jack input
LOOP THRU : Jack
Input Impedance line : 20 kohms; mic : 2 kohms
Polypropylene enclosure
35mm integral pole mount fitting
Black finish



Weight: 23.4kg (including packaging)
Height: 70.0cm x Width: 45.0cm x Depth: 36.0cm
Warranty: 12 months
Power: 240V / 110V Switchable