Content |
This sturdy equipment stand is perfect for studio, club installations, as well as home use and can be placed over your existing DJ setup. When DJs are faced with the "extreme lack of space in the DJ-booth and where to put my controller” problem, this stand is a helpful space-saving solution for clubs as it fits perfectly over a 12" club mixer like a Pioneer DJM-800. It also features non-slip rubber surface and feet to insure maximum stability during your performance and its overall elevated height provide best protection against spilled drinks, dirt, and more. The slightly angled controller and laptop platforms are both individually adjustable in height and width to find the right position for any controller setup. | Gravity LTS T 02 W Universal Laptop Stand with Adjustable Holding Pins and Steel Base
Live performers and studio musicians are familiar with having to find a place to put their laptop, tablet or central effect unit. But also being able to move your workstation around when working at home can be helpful to ensure a quick and flexible change of scenery. The LTST 02 W laptop stand from Gravity® offers you this possibility. Whether you're a musician, technician, photographer or stay-at-home worker, the universally applicable, flexible and very stable tray means you no longer need to worry about your work equipment.
There are many ways the large, height-adjustable tray panel, which offers enough space to accommodate all common 12 "to 17" laptops, can be used. The four adjustable retaining bolts - which can be removed if required - ensure the safe and secure positioning of laptops, tablets or compact mixers on the tray. Numerous ventilation slots enable the proper ventilation of electronics. Extra flexibility is offered by the tray panel which can be adjusted to any angle. This allows the LTST 02 W to be used both vertically and horizontally, for example, to keep your notes visible at all times when giving a talk.
The LTST 02 W is an extremely stylish laptop stand with a sleek look, mainly in part due to its single leg and a flat base made out of solid steel. In contrast to conventional tripods which are rarely used off stage or outside the studio due to their close resemblance to microphone and loudspeaker stands, the LST 02 W also cuts a fine figure at events, conferences or in offices. The height of the LTST 02 W can be flexibly adjusted between 79 cm and 129 cm, meaning it can also be used while sitting down.
With the LTST 02 W, Gravity® offers you a universal laptop stand that's bound to win you over as a flexible portable tool for setting up mobile performance rigs in a variety of situations.
Product type |
Stands and Tripods Multimedia Equipment |
Type |
Laptop Stand |
Support material |
Steel |
Tube material |
Steel |
Tubing surface |
Powder-coated |
Color |
White |
Width adjusting jaws |
40 mm |
Width spacing between adjusting pins min. |
120 mm |
Width spacing between adjusting pins max. |
425 mm |
Height spacing between adjusting pins to adjusting jaws min. |
117 mm |
Height spacing between adjusting pins to adjusting jaws max |
250 mm |
Width spacing between adjusting jaws min. |
130 mm |
Width spacing between adjusting jaws max. |
360 mm |
Support width |
480 mm |
Tray height |
330 mm |
Min. height |
790 mm |
Max. height |
1200 mm |
Transport length |
790 mm |
Height adjustment |
Set screw with safety split pin |
Dimensions Base (W x H x D) |
565 x 20 x 330 mm |
Base material |
Steel |
Base weight |
8.2 kg |
Max. load capacity |
15 kg |
Interchangeable rings |
1 x 25 mm, 2 x 30 mm, 4 x 15 mm |
Black ring pack included |
Yes |
Weight |
11,76 kg |
|
Gravity LTS T 01 Laptop stand
No matter if you're working on stage, at home, in the studio or on location at a photo shoot, now your laptop can stay firmly fixed in place and stable at all times in your mobile performance rigs -positioned just the way you want - all thanks to the Gravity® LTST 01 laptop stand.
The large mounting plate can accommodate all standard laptop sizes ranging from 12" to 17". Your laptop is carefully and securely attached to the stand thanks to 14 slots in the top section, 2 slots in the bottom section, and the freely adjustable holding pins and clamps that come supplied with the product. The holding pins are pressed onto the laptop and then locked into place from below using the set screws.
You can also use the stand for your DJ controller, mixer or other pieces of equipment that you always need within arm's reach. The mounting plate can be tilted continuously by 180°, meaning it can be used both in vertical and horizontal applications. It can also be easily twisted off for use in the field.
Its solid aluminium tripod with a 35 mm socket has been designed for maximum mobility because it weights only 1.94 kilograms. The stand's height can be gradually adjusted from 750 mm to 1.320 mm, allowing you to adjust it perfectly to your needs - whether you're standing or sitting.
With the LTST 01 laptop stand, Gravity® offers you a flexible companion for your mobile performance rigs.
Product type
Stands and Tripods Multimedia Equipment
Width spacing between adjusting pins min.
Width spacing between adjusting pins max.
Height spacing between adjusting pins to adjusting jaws min.
117 mm
Height spacing between adjusting pins to adjusting jaws max
250 mm
Width spacing between adjusting jaws min.
Width spacing between adjusting jaws max.
Height adjustment
Set screw with safety split pin
|
- Individually adjustable holding pins
- Height: 65-265 mm
- Laptop support: 250 x 303 mm
- Max. load capacity: 8 kg
- Folded size: 303 x 284 x 65 mm
- Weight: 2.9 kg
- Colour: Basalt gray
- Includes device-friendly support pads
- Perfect for the mobile musician and DJ
- Handsome powder coat finish
- Rugged steel base plate
- Lightweight aluminum support plate and extension arm
- Robust hinge joints protect your laptop from slipping
- Adjustable stop pins and rubber caps
- Easy to assemble, disassemble, and break down for transit
- Height range: 2.56 inches to 10.43 inches
|
- Height-adjustable, 360° rotatable shelf
- Holds laptops, iPads, tablets, controllers and a wide range of other devices up to 19"
- 2-Click quick-release mechanism for fast assembly
- Non-slip surface
- Robust and durable metal construction
- Scratch-resistant powder coating
- Height: 230 to 350 mm
- Maximum load: 15 kg
- Dimensions (W x H x D): 280 x 273 x 35 mm
- Weight: 1.85 kg
- Colour: White
- Incl. case
| Professional DJ desktop stand w/ lower support plate
Perfect for supporting your laptop, usb controller, CD players, mixing desk, etc... - Stable, solid steel construction - Scratch-resistant powder coating - EVA-coated, scratch safe no-slip support arms - Height adjustable in 5 positions, 3cm (1.2“) apart - Min height: 23cm (9.5“), Max height: 35cm (13.8“) - Base coated with non-slip EVA foam(LxW): 23 x 19cm (9.5" x 7.5“) - Weight: 1.95kg (4.3 lbs) - Colour: black. |
Reviews
There are no reviews yet.