Content |
2-way recessed speaker
The IWP 82 is the larger of the two recessed speakers of the Interior Performance series. Equipped with a 19 mm tweeter than can be pivoted by 35° in all directions, the in-wall system can also be adapted to very custom installation scenarios. As a result, most installation situations can be handled successfully.
Thanks to the coated surface of the cone and high-quality components, installation in humid areas such as in bathroom or near a swimming pool is no problem. In addition, installation with the help of the rugged clamping mechanism is easy.
Principle
2-way in-wall/in-ceiling loudspeaker
Equipment
25 mm tweeter
200 mm woofer
Power Handling (RMS / Max.)
80 / 140 watts
Sensitivity (2.8V/1m)
91 dB
Impedance
8 Ohms
Frequency Response
34 – 26000 Hz
Crossover Frequencies
3800 Hz
Recommended Amplifier Output
20 - 160 Watts
Mounting depth
88 mm
Outer Dimensions (WxH)
254 x 359 mm
Cutting Out (WxH)
218 x 321 mm
Weight
1.6 kg
|
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 1 - 3/4" Diameter (1.91cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response 32Hz-20kHz
Lower -3dB Limit 60Hz
Upper -3dB Limit 20kHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 20-100 w/channel
Efficiency 89 dB
Dimensions
Size 14-5/16" H x 8-1/2" W
(36.35cm H x 21.59cm W)
Cut-out Size 12-3/4" H x 7-1/4" W
(32.38cm H x 18.41cm W)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 2-5/8" (6.67cm)
Overall Depth 3-1/8" (7.94cm)
Shipping/Other
Shipped As each
Product Weight 3.45 lbs. (1.56kgs) each
Total Shipping Weight 5.00 lbs. (2.27kgs)
Speaker Warranty Lifetime Warranty
|
Tweeter ¾" silk/polymer x 1
Mid/Woofer 6 ½" composite polymer x 1
Frequency Response 35 Hz - 25 kHz
Nominal Impedance 8 Ohms
Rec. Amp Power 20-100 W/ Channel
Efficiency 89 dB
Dimensions(cm) 36.51 x 22.54 x 8.57
|
Length No
Accessories N/A
Amplifier N/A
Auto On/Off No
Cabinet Design N/A
Color Black
Dimensions: (H/W/D) For installation, use mudring as a guide (leave an opening that is approximately 16 1/2” x 13 1/4”)
HiPass Crossover N/A
LoPass Crossover N/A
Phase Control No
Removable Grille No
Shipping Weight No
Size Large
Voice Coil N/A
Warranty (N. Am.) N/A
|
Tweeter ¾" ring radiator x 1
Midrange ¼" APP driver x 3
Mid/Woofer 6“x9" mineral filled polypro. x 1
Frequency Response 28 Hz - 27 kHz
Nominal Impedance 8 Ohms
Rec. Amp Power 10-150 W/ Channel
Efficiency 90 dB
Dimensions(cm) 24.45 x 24.13
|
The IW 810 is the larger of two strong-sounding built-in loudspeakers in the Interior series. As with all models in the series, the bass/mid-range cone has been manufactured from a carbon-glass-fibre mix – which guarantees extremely high stability and a very clear and dynamic sound.
A 25 mm fabric dome tweeter – which may be adjusted horizontally and vertically – has been fitted into the front. Which means that the emitted sound may be perfected to suit even very different room conditions. A sophisticated fastening system allows the loudspeaker to be quickly installed with extreme ease.
Description
Value
Principle
2-way in-wall/in-ceiling loudspeaker
Equipment
25 mm tweeter
200 mm woofer
Power Handling (RMS / Max.)
100 / 180 watts
Sensitivity (2.8V/1m)
91 dB
Impedance
4 – 8 Ohms
Frequency Response
32 - 32000 Hz
Crossover Frequencies
3500 Hz
Recommended Amplifier Output
30 - 180 Watts
Mounting depth
90 mm
Outer Dimensions (WxH)
255 x 358 mm
Cutting Out (WxH)
224 x 335 mm
|
Reviews
There are no reviews yet.