Content |
First Impressions
If youʼre impressed by elegantly restrained industrial design, the MM7025 is guaranteed to make a lasting – and very positive – impression. The subtly curved aluminum/glass resin front panel adds a sophisticated touch that complements any décor. The central porthole display reflects iconic Marantz designs of the past while it brings you an "at a glace” view of the amplifierʼs operating status.
Front Panel | Aluminum/Glass-reinforced resin |
Power Requirement | AC 120V 60Hz |
Power Consumption | 330W (Standby: 0.2W) |
Dimensions W x H x D (Inchs) | 17-3/8 x 4-15/16 x 13-7/8 |
|
Class XD™ amplification designed to eliminate crossover distortion at low signal levels New balanced volume topology controllable in 1dB steps, giving very fine control, and superbly accurate channel balance Audiophile grade oversize toroidal transformer and substantial extruded heatsink allowing 2 x 120 Watts RMS into 8 Ohms or 2 x 200W into 4 ohms. Separate transformer taps for left and right channels, twin rectifiers and separate PSUs for dual mono operation of the left and right power amplifiers A separate toroidal transformer supplies the preamp making the 851A effectively a Pre and Power amp combination in one box CAP5 protection technology for trouble free operation Acoustically damped full metal chassis with thick brushed aluminium front panel Customisable front panel display Balanced and unbalanced analogue audio inputs for superior connectivity RS232 controllable Eco-friendly Available in black and silver finishes
|
Audio Connectivity Features | Analog Audio Input (Rear) | 5 | Phono Input | 1 | FM Tuner Features | Frequency Range MHz | 87.5 MHz | Usable Sensitivity (IHF) | 1.3 μV/13.2 dBf | Signal-to-Noise Ratio (Mono/Stereo) | 70 dB/68 dB | Distortion (Mono/Stereo) | 0.2%/0.3% | Stereo Separation @ 1kHz | 40 dB | Selectivity ±400kHz | 70 dB | AM Tuner Specifications | Frequency Range kHz | 520 kHz | Signal-to-Noise Ratio | 38 dB | Usable Sensitivity (Loop) | 500 μV | Selectivity | (±10 kHz): 30 dB | Distortion | (1 kHz, 50% mod): 1.0% | General Specifications | Power Requirement | 120V AC, 60Hz (USA); 220V – 240V AC, 50Hz/60Hz (EU) | Power Consumption (full power/idle) | 310W maximum, | Dimensions (H x W x D – Metric/English) | 121 mm x 440 mm x 300 mm | |
Ti 120 SIGN.
Special power and output transformer
from BHS uk and Mundof M-Cap
signal capasitors
Integrated tube amp.Four line inputs.
2X12AU7, 4x KT 88, 2x12AX7
2x6SN7 75 Wrms per chan.4-8 ohm.
Class AB push-pull.Remote control inc.
Negative feedback on/of switch.
echnical specification
|
|
|
Integrated Amplifier
|
Frequency response:
|
10 Hz - 50 kHz (± 0.5 dB)
|
Total harmonic distortion (THD):
|
1 % (1 kHz)
|
Signal-to-noise ratio:
|
92 dB
|
Input Impedance:
|
100 kOhm
|
|
|
Vacuum tube:
|
4x KT88/EL34, 2x 12AU7, 2x 12AX7, 2x 6SN7
|
Dimensions W x H x D:
|
440 x 220 x 390 mm
|
Weight:
|
28 kg
|
Accessories:
|
Remote Control
|
Input Terminals:
|
Tape, CD, AUX, Tuner
|
Output terminals:
|
Tape out
|
Circiut:
|
Class A/B P.P.
|
Colour:
|
Chassis chrome, transformer black
|
Colour front:
|
black, silver
|
Sensitivity
|
590 mV
|
Output Impedance:
|
4 Ohm, 8 Ohm
|
Power Output:
|
2 x 70 Watt @ 1 % THD
|
Consumption:
|
max. 380 Watt
|
Highlights
|
switchable reduction of feedback
|
|
The PM6006 is an upgraded successor of the multi-award-winning PM6005. We've retained the pre-amp and power-amp sections that exclusively feature discrete components - not a single IC in sight of the signal path. The PM6006 is upgraded for peak current at the amplifier stage, which makes it possible to refine the sound for you in much more detail.
Maximum Dimensions (W x D x H) | 17.3 x 14.6 x 4.1 |
|
High rigidity metal frame
Shielded high current power supply
• 500VA toroidal transformer
• 80.000uF capacitor bank
• Rubber insulated aluminium feet
• WBT connector on unbalanced input
• Neutrik connector on balanced input
• Fully discrete analogue design
• Onsemi MJL1302/3281 power transistor
• Low overall feedback
• High stability on capacitive loads
• White Gold cable on output connection
• 100W/8Ohm power unit and double the
power on 4 Ohm until 390W on 2Ohm; a
big power reserve that allows to drive any loudspeakers even in a big room.
|
Reviews
There are no reviews yet.