| Content | New to the Marantz collection, this excellent entry-level integrated amplifier breaks all the rules. Thatʼs because itʼs the first in its class to offer current feedback architecture – a feature that normally is reserved for the more expensive models. This technology provides very fast and accurate signal handling, which results in perfectly balanced stereo sound reproduction as well as a very open and precise sound stage. Itʼs also been recently enhanced with performance–optimising discrete audio circuitry and fine-tuning components. In addition, this yearʼs model looks a little more stylish than last yearʼs, thanks to new elegant knob design. On top of that, it comes with a new remote and a new low-power stand-by and auto stand-by mode. But back to being an amp: the PM5005 offers 40W per channel into 8 ohm or 55W into 4 ohm, and includes a metal chassis and a front metal panel to ensure a very rigid and solid base. It also has a Phono MM equaliser, as well as a Source Direct functionality to ensure shortest signal paths. Without doubt, the PM5005 has raised the performance bar in the so-called entry level area. Great sound. Amazing versatility.
| Current Feedback Topology |
o |
| Phono EQ: Standard / Current Feedback / Constant Current Feedback |
o / - / - |
| Power Transformer: Toroidal / El |
- / o |
| High Grade Audio Components |
o |
| Balance / Bass / Treble / Loudness |
o / o / o / o |
| Phono Input: MM / MC |
o / - |
| Speaker Terminal: Screw / Marantz / WBT |
o / - / - |
| Power Output (8 / 4 Ohm RMS) |
40 W / 55 W |
| Power Output (8 / 4 Ohm DIN) |
45 W / 60 W |
| Power Output (8 / 4 Ohm IHF) |
55 W / 80 W |
| Frequency Response |
10 Hz - 50 kHz |
| Total Harmonic Distortion |
0.05% |
| Input Sensitivity: MM |
2.2 mV / 47 kOhm |
| Signal to Noise Ratio: MM / MC |
83 dB / - |
| Input Sensitivity: High level |
200 mV / 20 kOhm |
| Signal to Noise Ratio: High level |
102 dB (2V input) |
|
High rigidity metal frame
Shielded high current power supply
• 500VA toroidal transformer
• 80.000uF capacitor bank
• Rubber insulated aluminium feet
• WBT connector on unbalanced input
• Neutrik connector on balanced input
• Fully discrete analogue design
• Onsemi MJL1302/3281 power transistor
• Low overall feedback
• High stability on capacitive loads
• White Gold cable on output connection
• 100W/8Ohm power unit and double the
power on 4 Ohm until 390W on 2Ohm; a
big power reserve that allows to drive any loudspeakers even in a big room.
|
Enjoy superb sound from your favorite analog and digital sources with the Marantz PM7005 integrated stereo amplifier. Featuring a high current discrete power output stage with current feedback (a Marantz innovation), the PM7005 is also equipped with our exclusive HDAM technology, employing proprietary circuit modules with discrete components that deliver ultra-wideband response and fast slew rate.
The versatile PM7005 features multiple analog and digital inputs, including optical and coaxial digital inputs along with a USB-B 2.0 for direct connection to computer high resolution digital audio sources. Featuring the reference-class CS4398 high resolution D/A converter, the PM7005 can decode high resolution digital audio files up to 24 bits and 192 kHz sampling. It's also compatible with DSD 2.8 MHz and 5.6 MHz high resolution files (the same system found on SACD), and the asynchronous USB-B port also features jitter removal for the most pristine sound quality.
There are multiple analog inputs, including a MM phono input, along with dual recording inputs and outputs, and the Source Direct function bypasses the balance and tone controls for the shortest signal path, while the Analog mode disables the digital circuitry when listening to analog sources.
| Maximum Dimensions (W x D x H) | 17.32 x 14.92 x 4.92 in. |
|
Τi 60 tube
Integrated tube amp.Four line inputs.
2X12AU7, 4x EL34, 1x12AX7
35 Wrms per chan.4-8 ohm.
Class AB push-pull
Remote control included.
|
Technical specification
|
| |
|
Integrated Amplifier
| |
Frequency response:
|
10 Hz - 50 kHz (± 0.5 dB)
| |
Total harmonic distortion (THD):
|
1 % (1 kHz)
| |
Signal-to-noise ratio:
|
92 dB
| |
Input Impedance:
|
100 kOhm
| |
|
| |
Vacuum tube:
|
4x KT88/EL34, 2x 12AU7, 2x 12AX7, 2x 6SN7
| |
Dimensions W x H x D:
|
440 x 220 x 390 mm
| |
Weight:
|
28 kg
| |
Accessories:
|
Remote Control
| |
Input Terminals:
|
Tape, CD, AUX, Tuner
| |
Output terminals:
|
Tape out
| |
Circiut:
|
Class A/B P.P.
| |
Colour:
|
Chassis chrome, transformer black
| |
Colour front:
|
black, silver
| |
Sensitivity
|
590 mV
| |
Output Impedance:
|
4 Ohm, 8 Ohm
| |
Power Output:
|
2 x 70 Watt @ 1 % THD
| |
Consumption:
|
max. 380 Watt
| |
Highlights
|
switchable reduction of feedback
|
|
Technical Specifications
Continuous power output, per channel, 8Ω
- Both channels driven, 8Ω,20Hz-20kHz, 0.2% THD - 200W
- Single, 4Ω, at 1kHz - 400W
Inputs
- Nominal sensitivity for 200W / 8Ω - 1.15V (RCA), 2.3V (XLR)
- Input impedance - 10kΩ
- Frequency response 20Hz-20kHz +/- 0.05dB
- Signal/noise ratio (Awtd) 50W / 8Ω - 110dB
General
- Power consumption (standby) -
|
Power Output One Channel Driven :275 watts
Dimensions (Without Brackets, Including Feet) :17-1/16" W x 9-5/8" D x 3-11/16" H (43.34 cm W x 24.45 cm D x 9.37 cm H)
Weight | Metric :28 lbs | 12.70 kg
Dimensions (With Brackets, Feet Removed) :19-1/16" W x 9-5/8" D x 3-7/16" H (41.42 cm W x 24.45 cm D x 8.73 cm H)
Finish :Available in both silver and black
Power Output Two Channels Driven :230 watts each
|
Reviews
There are no reviews yet.