MARK BASS Little Marcus Electric Bass Head

• Marcus Miller signature model
• Power: 500W @ 4Ω, 300W @ 8Ω
• Controls: Gain, master volume
• Controller EQ1: Ultra bass, bass, low and high mids
• Controller EQ2: Millerizer, oldschool
• Footswitch connection (EQ1, EQ2 on/off)
• Line out with XLR output (jack)
• Mute to Tune with tuner output (jack)
• FX LOOP Pre/Post EQ switch
• FX LOOP connection send/return for effects (jack)
• Speaker output combo jack (Speakon/jack)
• Dimensions (W x H x D): approx. 27.6 x 8.3 x 25 cm
• Weight: approx. 2.3 kg
• Optional footswitch for switching the EQs on and off available under: Article Nr 198735

This is the speaker cabinet for the bass player who demands the ultimate in a single, compact cabinet setup. The SVT-410HLF delivers devastating low-end bass, all the way down to 28Hz, thanks to four 10” speakers working together to move a tremendous amount of air. The SVT-410HLF actually moves 10% more air than two 18-inch speakers, and 25% more than three 15-inch speakers! And those leviathans simply canʼt respond to transient peaks as quickly as four tens can.  
The SVT-410HLF also delivers superb top-end, thanks to its 1” horn driver, strategically crossed over at 4kHz. This is a favorite enclosure for such artists as Meshell Ndegeocello, John McVie of Fleetwood Mac, and Ricky Skaggsʼ bass player, Mark Fain.The Ampeg SVT-410HLF is the supreme speaker enclosure for the multi-string bass player seeking both superior power handling and true high-fidelity performance.

Eden WTX264 Bass Amplifier Head Features: >Eden's proprietary Enhance control >3-band EQ with Dynamic Bass Boost and Mid-shift functions >Studio-quality DI with level and ground lift >FX loop >Stereo Aux Inputs >Tuner and Headphone outputs >Two 1/4" and one NL-4 (Speakon) Speaker outputs >Optional Rack-mount hardware >Power 4 Ohms: 260-300W RMS @4 Ohms >Damping Factor: 4000 >Distortion: .006% >Frequency Response: 10Hz-20KHz ±2dB >Headroom: 3dB >Dimensions: 8“W X 2.5“H X 9“D >Weight: 4.3 LBS

Eden E300 Bass Amplifier Head - Lightweight and Compact. Eden's Proprietary Enhance Control deliver classic Eden tone. The Eden E300 bass amplifier head is a 300 watt head featuring stereo aux tape or cd input, auto compression, Enhance, 3 band eq, balanced DI, and headphones jack output. Eden E300 Bass Amplifier Head Features: > 300 Watts RMS @ 4 Ohms +/-3dB. > 3 band tone with Enhance control > Front panel 1/8" MP3 input for practice & rehearsal > Front panel Aux in > Front panel XLR DI > Headphone out > Dimensions: 15.8 x 10.3 x 3.4 inches > Weight: 32 LBS

For the bassist, VOX introduces the newest member of the Path­finder family: the Pathfinder 10 Bass.

Guitarists have long been familiar with these best-selling, portable, solid-state combo amps, and now bass players can experience a taste of the legendary VOX brand with the Pathfinder Bass 10. From the diamond grille cloth and basket-weave vinyl leather to the vintage chicken-head knobs, the Pathfinder Bass 10 loudly proclaims its VOX pedigree. This dual- speaker, deep-thumping, portable amp is ideal for the on-the-go bass player. In addition to Treble and Bass tone-shaping controls, the Bright switch offers an edgy boost to the upper harmonics. Turning up the Drive control provides a warm, bass distortion that adds character and vitality to the tone. The Pathfinder Bass 10 pumps out 10 watts into a pair of 5" VOX bulldog speakers. A headphone/line output jack is also provided for silent practice and recording.

• Output Power: 10 Watts RMS
• Speaker: VOX Bulldog 5" x 2 (4 ohms)
• Input: INPUT jack
• Output: PHONES/LINEOUT jack
• Controls: DRIVE, TREBLE, BASS, VOLUME, BRIGHT switch
• Dimensions (W x D x H): 380 x 170 x 277mm (including projections) / 14.98 x 6.69 x 10.91 inches
• Weight: 5.6kg / 12.32 lbs

The more aggressive tone of the 10” speakers means you can often get by just with this combo, but it does also stack with any 8 ohm Traveler or Standard cab, for more volume and headroom. The CMD 102P combo just might be our most versatile combo! It's perfect for any situation. The angled cabinet design allows the unit to be used either as a floor monitor or in standard vertical position. The built-in VLE and VPF filters help create a warm and natural sound.