| Content |
The flagship Markbass amplifier, the Little Mark III is the industry standard for tone, portability and value.
The flagship Markbass amplifier, the Little Mark III is the industry standard for tone, portability and value.This amp adds some high-requested features to its famous predecessor Little Mark II, with the same compact size and weight! The Little Mark III's solid-state preamp has a warm and natural sound, and faithfully reproduces the true tone of your instrument. The 500-wattMarkbass power amp (Markbass Proprietary Technology) supplies impeccable bass frequency reproduction. The new DI output features a pre-post EQ switch and output level control, so you can optimize the signal you send to the mixer or recording unit.
- INPUT: impedance 500 Kohm, max. voltage 15 Vpp
- BALANCED INPUT (XLR): impedance 100 Kohm, max. voltage 25 Vpp
- EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp
Controls
- GAIN: -60 dB to +23 dB range
- MASTER VOLUME
- LINE OUT LEVEL
- GROUND LIFT (switch on rear panel)
- PRE/POST EQ (switch on rear panel)
Equalization
- LOW: center frequency: 40 Hz; level: ±16 dB
- LOW MID: center frequency: 360 Hz, level: ±16 dB
- HIGH MID: center frequency: 800 Hz, level: ±16 dB
- HIGH: center frequency: 10 kHz, level: ±16 dB
- VPF (Variable Pre-shape Filter): center frequency 380 Hz
- VLE (Vintage Loudspeaker Emulator): frequency range 250 Hz-20 kHz
- LINE OUT: balanced XLR, max. voltage 20 Vpp
- EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
- TUNER OUT: unbalanced, max. voltage 2 Vpp
- SPEAKER OUT: speakon/1/4" combo, 1/4“
- WEIGHT: 5.07 lbs / 2.3 kg
- WIDTH: 10.87 in. / 27.6 cm
- DEPTH: 9.84 in. / 2.5 cm
- HEIGHT: 3.27 in. / 8.3 cm
- OUTPUT POWER: 500W RMS @ 4 ohms / 300W RMS @ 8 ohms
|
Designed and assembled in the U.S.A., the Ampeg Heritage SVT-CL is built with premium components and construction, delivering true Ampeg tone. Premium JJ tubes provide unmatched tone and classic Ampeg EQ offers flexibility and control. It's Ampeg's Heritage, but it's your gear... and has been for more than 60 years. | The world-renowned Classic Series Cabinets are synonymous with bass enclosures and the sound they are expected to produce. And because we know that players have different tastes, we make the configuration YOU are looking for. From the undeniable tone of the SVT-810E to the unexpected low end of the extended range SVT-410HLF, Ampeg enclosures have set the standard for decades. All enclosures feature dual Neutrik Speak-On(r) and 1/4' input/output jacks. Cabinets using high frequency horns contain a variable level attenuator. To prevent overpowering and damaging the horns, a resistive bulb is wired in series with the horn for protection. |
The more aggressive tone of the 10” speakers means you can often get by just with this combo, but it does also stack with any 8 ohm Traveler or Standard cab, for more volume and headroom. The CMD 102P combo just might be our most versatile combo! It's perfect for any situation. The angled cabinet design allows the unit to be used either as a floor monitor or in standard vertical position. The built-in VLE and VPF filters help create a warm and natural sound.
|
All of our BG250 combos share the same fundamental tone, yet they alsosound unique. Subtle details and the fact that you can customize the amps with TonePrint effects and settings makes sure that you will always be able to get the sound you are looking for no matter which BG250 you choose.
- Ultra-light, Ultra-powerful
- Two TonePrint Slots
- Intelligent Tone Shaping Tools
- Built-in Tuner for 4, 5 and 6 String Basses.
BG250-112 gives you the best from both worlds. Tight and powerful sound with a strong presence in the mids. Make it bassy and old school, or modern and crisp. The choice is yours! It's light yet super powerful,features intelligent tone shaping toolsand has an onboard tuner for 4, 5 and 6 string basses.Add to that, the ultimate effects solution: Dual TonePrint! You can swap effect types on the fly and you even get custom TonePrints created by some of the greatest bass players totally free of charge.
| Power: | 200 Watts> | | Speaker: | 1 x 12'' | | Modeling Technology: | No | | Effects: | Yes | | Tuner: | Υes | | Power: | 250 Watts | | Driver: | 1 x 12'' Custom driver woofer,1 x 1'' Custom piezo tweeter | | Effects: | 6 Effect Types | | Modeling Technology: | - | | Channels: | 1 | | Equalizer: | Bass: Cut@80Hz / Boost@100Hz,Mid: Cut@500Hz / Boost@800Hz,Treble: Cut@1,800Hz / Boost@2,500Hz | | Output: | 1x Balanced Di Out - Seamless Recording or PA output - Headphone out x 1 | | Inputs: | 1 x Rehearsal Input | | Tuner: | Yes | | Controls: | Gain, Bass, Middle, Treble, Toneprint A/B, Master, Mute, Pre EQ/Post EQ | | Footswitch: | Yes ( Optional ) | | FX Loop: | - | | DI Socket: | Yes | | Dimensions ( W x H x D ): | 45,8 x 37.5 x 54 cm. | | Weight: | 16 kg |
|
Marshall VBC810 Bass Amplifier Cabinet for use with VBA400
The VBC810 is a specially designed, heavy duty 8x10" cabinet for use with the VBA400 head. Built as only Marshall knows how, it features four separate sealed chambers which help to prevent unwanted cabinet resonance while adding to the structural integrity of the unit. It is also lined with sound absorbent wadding to further help dampen internal resonance.
It comes loaded with custom designed loudspeakers which have been specially designed to handle the power of the VBA400's output while giving you superb, professional performance. Operating at 4 Ohms impedance it has been designed to perfectly complement the VBA400. As the amplifier will accept a load of 2 Ohms, combinations of two cabinets can be used to create an awesome bass rig.
Clad in Marshall's trademark, heavy duty, black vinyl, the 640 Watt VBC810 boasts roadworthy, high grade fittings, including a recessed handle on the bottom for easy lifting, castors and kick plate for easy tilt and roll capability.
Speaker Configuration 8x10"
Power Handling (RMS) 640W
Impedance 4 Ohms
Weight - 73 kgs
Dimensions (mm) 675x1265x410
|
Reviews
There are no reviews yet.