Content |
- SPEAKER SIZE: 2x10”
- TWEETER: 1” VOICE COIL
- CAB Power Handling (AES Standard): 400W - RMS
- CROSSOVER FREQUENCY: 3.5 kHz
- FREQUENCY RESPONSE: 40Hz to 20kHz
- SENSITIVITY: 101 dB SPL
- IMPEDANCE: 8Ω
- REFLEX/CAB DESIGN: REAR/WEDGE
- DIMENSIONS: 23.38”/59,4cm | 18.93”/48,1cm | 20.39”/51,8cm
- WEIGHT: 40.34lbs/18,3kg
|
Marshall VBC810 Bass Amplifier Cabinet for use with VBA400
The VBC810 is a specially designed, heavy duty 8x10" cabinet for use with the VBA400 head. Built as only Marshall knows how, it features four separate sealed chambers which help to prevent unwanted cabinet resonance while adding to the structural integrity of the unit. It is also lined with sound absorbent wadding to further help dampen internal resonance.
It comes loaded with custom designed loudspeakers which have been specially designed to handle the power of the VBA400's output while giving you superb, professional performance. Operating at 4 Ohms impedance it has been designed to perfectly complement the VBA400. As the amplifier will accept a load of 2 Ohms, combinations of two cabinets can be used to create an awesome bass rig.
Clad in Marshall's trademark, heavy duty, black vinyl, the 640 Watt VBC810 boasts roadworthy, high grade fittings, including a recessed handle on the bottom for easy lifting, castors and kick plate for easy tilt and roll capability.
Speaker Configuration 8x10" Power Handling (RMS) 640W Impedance 4 Ohms Weight - 73 kgs Dimensions (mm) 675x1265x410
| The NEW YORK 122 NINJA Richard Bona signature cabinet has a very full yet focused sound, with controlled bottom end from the 2x12” Markbass custom speakers and fantastic clarity and detail from the special new 1.25” compression driver that delivers smooth and crisp highs that are never harsh or brittle. With its 800W power handling itʼs a great single cab choice for medium or large gigs, and its 8 Ω allows you to match two of them with our powerful Markbass heads like the new Little Mark Ninja or Bass Multiamp S. "I searched it, and I found it. Itʼs my sound and tone”, says Richard, "In the end It ALL come down to BASS Sound. Itʼs ALL in Markbass!” |
The sound is in your head. You've played countless instruments in search of the ultimate soul mate. Now you need an amp that will speak your sound to the audience. Thatʼs where the SVT-3PRO comes in. Thereʼs a reason this amp is a best seller—it delivers the goods! With up to 450 watts and the sweet sound of tubes, the SVT-3PRO is the top choice of rockers and funkmeisters around the globe.
Itʼs all about tone. The SVT-3PROʼs Frequency control allows you to select the center frequency for the Midrange control, giving you a choice of five distinct "voices” for the Midrange. The center frequencies are 220Hz, 450Hz, 800Hz, 1.6kHz and 3kHz. And if thatʼs not enough, you can use the 9-Band Graphic EQ to custom tailor your sound even more. Or use the EQ to set up a footswitchable "second channel” for your show-stopping bass solo.
The SVT-3PRO is designed for the player who wants SVT tone and performance (with a few modern enhancements) in a convenient rackmount design. Robert Trujillo (Metallica) and Les Claypool (Primus) are just a couple of the world-class artists that depend on the SVT-3PRO to get the job done, day in and day out.
Power: | 450 Watts 4 Ohms, 275 Watts 8 Ohms | Channels: | 1 | Equalizer: | Tone Control 3-Band, Mid Tone 5-Position, Graphic EQ 9-Band | Inputs: | Bass, Power Amp In | Outputs: | Balanced Line Out, Neutrik Speakon Out, Preamp Out, Tuner Out | Controls: | Gain, Brightness, Bass, MidRange, Frequency, Treble, Master, Tube Gain, 9 Band EQ | Dimensions ( W x H x D ): | 48,26 x 10 x 39,37 cm | Weight: | 11.82 kg |
| Just over a decade ago, Marco De Virgiliis started pioneering small, lightweight amps; the Markbass Little Mark heads started a new era in bass amplification, inspiring many other companies to follow their lead.Now, you'll be amazed that such a warm, rich and "explosive” sound comes from an amp smaller than our groundbreaking Little Mark heads! And—despite its small size—the Big Bang is packed with extra features that customers have been asking for: aux in, headphone output with level control, plus mute and VLE and VPF filters with footswitch control. Other features, already appreciated by Little Mark users, include a simple and effective 4-band EQ, effects loop, and level control and pre/post EQ switch for theXLR DI output. |
Drawing from the classic design of Ampegʼs legendary Portaflex cabinets, the PF-115HE combines vintage styling with the performance of a modern 450W cab. The Eminence® 15½ driver pushes out true Ampeg tone. Since itʼs a Portaflex, you can attach any PF Series head to the top, flip it inside and hit the road Ampeg style. |
Reviews
There are no reviews yet.