| Content |
- Preamp: Solid State
- Amp Output Power (MPT): 60W @ 4 ohm / 45W @ 8 ohm
- Controls: Gain - Master
- EQ (±16dB): LOW (40 HZ) | MID (800HZ) | HIGH (6 KHZ)
- Speaker: 1 x 10" Markbass Custo
- Tweeter: Piez
- Speaker Power Handling (AES Standard): 200W RM
- Reflex: Rea
- Impedance: 8 ohm
- Crossover Frequency: 3.5 kH
- Frequency Responce: 45Hz to 18KH
Other Features:
- Aux IN - Headphone OUT
- XLR Line Out - Speaker ON/OFF
- Output for external cab (minimum load 8Ω)
- Dual Voltage Switch 120V/240V*
- *(not available on the 100V version manufactured for Japan)
- Dimensions: 14.56”/ 37cm | 13.14”/ 33,4cm | 14.40”/ 36,6cm
- Weight: 25.35lbs / 11,5kg
|
The sound is in your head. You've played countless instruments in search of the ultimate soul mate. Now you need an amp that will speak your sound to the audience. Thatʼs where the SVT-3PRO comes in. Thereʼs a reason this amp is a best seller—it delivers the goods! With up to 450 watts and the sweet sound of tubes, the SVT-3PRO is the top choice of rockers and funkmeisters around the globe.
Itʼs all about tone. The SVT-3PROʼs Frequency control allows you to select the center frequency for the Midrange control, giving you a choice of five distinct "voices” for the Midrange. The center frequencies are 220Hz, 450Hz, 800Hz, 1.6kHz and 3kHz. And if thatʼs not enough, you can use the 9-Band Graphic EQ to custom tailor your sound even more. Or use the EQ to set up a footswitchable "second channel” for your show-stopping bass solo.
The SVT-3PRO is designed for the player who wants SVT tone and performance (with a few modern enhancements) in a convenient rackmount design. Robert Trujillo (Metallica) and Les Claypool (Primus) are just a couple of the world-class artists that depend on the SVT-3PRO to get the job done, day in and day out.
| Power: | 450 Watts 4 Ohms, 275 Watts 8 Ohms | | Channels: | 1 | | Equalizer: | Tone Control 3-Band, Mid Tone 5-Position, Graphic EQ 9-Band | | Inputs: | Bass, Power Amp In | | Outputs: | Balanced Line Out, Neutrik Speakon Out, Preamp Out, Tuner Out | | Controls: | Gain, Brightness, Bass, MidRange, Frequency, Treble, Master, Tube Gain, 9 Band EQ | | Dimensions ( W x H x D ): | 48,26 x 10 x 39,37 cm | | Weight: | 11.82 kg |
|
Marshall VBC810 Bass Amplifier Cabinet for use with VBA400
The VBC810 is a specially designed, heavy duty 8x10" cabinet for use with the VBA400 head. Built as only Marshall knows how, it features four separate sealed chambers which help to prevent unwanted cabinet resonance while adding to the structural integrity of the unit. It is also lined with sound absorbent wadding to further help dampen internal resonance.
It comes loaded with custom designed loudspeakers which have been specially designed to handle the power of the VBA400's output while giving you superb, professional performance. Operating at 4 Ohms impedance it has been designed to perfectly complement the VBA400. As the amplifier will accept a load of 2 Ohms, combinations of two cabinets can be used to create an awesome bass rig.
Clad in Marshall's trademark, heavy duty, black vinyl, the 640 Watt VBC810 boasts roadworthy, high grade fittings, including a recessed handle on the bottom for easy lifting, castors and kick plate for easy tilt and roll capability.
Speaker Configuration 8x10"
Power Handling (RMS) 640W
Impedance 4 Ohms
Weight - 73 kgs
Dimensions (mm) 675x1265x410
|
Features: - 2x10 " Speaker - Impedance : 4Ω - Power : 300W - Volume control - Dimensions (mm) : 660 x 480 x 690 - Weight 35.20 kg | The NEW YORK 122 NINJA Richard Bona signature cabinet has a very full yet focused sound, with controlled bottom end from the 2x12” Markbass custom speakers and fantastic clarity and detail from the special new 1.25” compression driver that delivers smooth and crisp highs that are never harsh or brittle. With its 800W power handling itʼs a great single cab choice for medium or large gigs, and its 8 Ω allows you to match two of them with our powerful Markbass heads like the new Little Mark Ninja or Bass Multiamp S. "I searched it, and I found it. Itʼs my sound and tone”, says Richard, "In the end It ALL come down to BASS Sound. Itʼs ALL in Markbass!” |
Product Features:
Extremely versatile bass amplifier
Powerful 20-Watt, 8'' BUGERA speaker
VTC Virtual Tube Circuitry for tube-like sound
Dedicated 4-band EQ for ultimate sound shaping
CD input allows you to play along to your favorite music
Separate headphone output—perfect for quiet practicing
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
User's Manual
|
Reviews
There are no reviews yet.