Master Audio DH24/4 Compression driver with neodymium magnet 100w 4Ω

31.73 incl. GR VAT

Only 4 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Compression driver with neodymium magnet Frequency response: 1000 – 20000 Hz Sensitivity: 110dB Voice coil: 25mm Impedance: 4 Ohm Max power: 100W Diameter: 58mm Compatible with JBL 2408

 

Read more

Compression driver with neodymium magnet
Frequency response: 1000 – 20000 Hz
Sensitivity: 110dB
Voice coil: 25mm
Impedance: 4 Ohm
Max power: 100W
Diameter: 58mm

Compatible with JBL 2408

Weight 0.80 kg

Reviews

There are no reviews yet.

Be the first to review “Master Audio DH24/4 Compression driver with neodymium magnet 100w 4Ω”

Your email address will not be published. Required fields are marked *

Quick Comparison

Master Audio DH24/4 Compression driver with neodymium magnet 100w 4Ω removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-35 Tweeter με μαγνήτη νεοδυμίου 50W program 107dB/W/m-3500-18000 Hz. removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeB & C Speakers DE-200 Driver 1" 40W, 108,5dB 8 Ohm removeJBL 2450H NEODYMIUM DRIVER 4' 150W 8Ω remove
NameMaster Audio DH24/4 Compression driver with neodymium magnet 100w 4Ω removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-35 Tweeter με μαγνήτη νεοδυμίου 50W program 107dB/W/m-3500-18000 Hz. removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeB & C Speakers DE-200 Driver 1" 40W, 108,5dB 8 Ohm removeJBL 2450H NEODYMIUM DRIVER 4' 150W 8Ω remove
Image
SKUDH24/4DE-16DE-35DE-45DE-2002450H
Rating
Price 31.73 incl. GR VAT 99.20 incl. GR VAT 54.00 incl. GR VAT 136.15 incl. GR VAT 124.00 incl. GR VAT 1,465.00 incl. GR VAT
Stock

Only 4 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityOnly 4 left in stock (can be backordered)Only 1 left in stock (can be backordered)Available on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Compression driver with neodymium magnet
Frequency response: 1000 - 20000 Hz
Sensitivity: 110dB
Voice coil: 25mm
Impedance: 4 Ohm
Max power: 100W
Diameter: 58mm

Compatible with JBL 2408

DE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.
50 W continuous program power capacity
32 mm (1.25 in) aluminium voice coil
Mylar diaphragm
3500 – 18000 Hz response
108 dB sensitivity
Compact Neodymium magnet assembly

1” high frequency compression driver, titanium
diaphragm, flat aluminium wire voice coil, low distortion,
extremely good response from 1.5 kHz. to 18 kHz.

Specifications1
Throat Diameter 25 mm. (1 in.)
Nominal Impedance 8 Ω
Minimum Impedance 7.6 Ω
Power Handling
(1500 –20000 Hz)
Nominal2 60 W
Continuous Program3 120 W
Sensitivity (1W/1m)4 106 dB
Frequency Range 1 – 18 kHz
Recommended Crossover5 1.5 kHz
Voice Coil Diameter 44 mm. (1.7 in.)
Winding Material Aluminium
Inductance 0.11 mH
Diaphragm Material Titanium
Flux Density 1.7 T
Also available in 16 Ω, data upon request

Mounting and Shipping Informations
Two M6 holes 180° on 76 mm. (3 in.) diameter
Three M6 holes 120° on 57 mm. (2.2 in.) diameter
Overall Diameter 134 mm. (5.3 in.)
Depth 68 mm. (2.7 in.)
Net Weight (1 unit) 2.9 Kg. (6.4 lb.)
Shipping Weight (4 units) 12.5 Kg. (27.5 lb.)
Shipping Box (4 units) 300x160x180 mm.
(12x6.3x7.1 in.)
1 Driver mounted on B&C ME 45 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range . Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal
rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 1000 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

100 W continuous program power capacity
1” horn throat diameter
44 mm (1.7 in) aluminium voice coil
Titanium diaphragm
1000 – 18000 Hz response
106 dB sensitivity
150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, neodymium rare-earth magnet assembly, 8Ω
Weight0.80 kg1.70 kg10.00 kg2.00 kg2.00 kg10.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.80 kg
Weight 1.70 kg
Weight 10.00 kg
Weight 2.00 kg
Weight 2.00 kg
Weight 10.00 kg