Content | The WMS40 mini2 Sets ensure brilliant sound and ease of use at an unbeatable price/performance ratio.
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic
sound at any time.
The SR40 mini2 receiver provides three status LEDs each for channels 1 and 2, indicating ON/OFF
status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the
level at the ¼" output jack. Each receiver comes with a universal 12-V switched mode power supply with
EU, UK, and US adapters. The illuminated ON/OFF button switches both channels on and off
simultaneously.
The PT40 mini bodypack is probably the smallest and lightest transmitter in its class. A reliable mini XLR
input allows you to connect every compatible AKG miniature microphone.
The rugged HT40 mini handheld transmitter features an ON/OFF/MUTE switch and a sturdy wire-mesh
cap protecting the cardioid dynamic microphone element. Battery life is the same legendary 30 hours off
a single AA battery as for the standard WMS40 models, reducing the need to replace batteries and thus
saving real money in the long run. Consumer Alert (for US users)
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: The system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change.
KEY SPECIFICATIONS
Carrier frequency range 660 to 865 MHz
Modulation FM
Audio bandwidth 40 to 20,000 Hz
Frequency stability (-10°C to +50°C) ±15 kHz
T.H.D. at 1 kHz typ. 0.8%
Compander integrated
Signal/noise ratio typ. 105 dB(A)
RF output typ. Max. 10 mW
Power requirement single 1.5-V AA size battery
Battery life >30 hours | The HT-300 metal handheld transmitter is made to withstand the rigors of daily use but still be comfortable in your hand. The PL22 dynamic microphone is the perfect all-around microphone for speaking engagements, singing and emcees. The cardioid pick up pattern rejects noise from the surroundings, helps to control audio feedback, and still allows an experienced vocalist to work the microphone. The receiver for the R300 system is equally at home on a table top or in a 19 inch equipment rack. Rack mount kits and front mount antenna cables are available for the R300 for a professional installation. For applications with up to 4 receivers in one rack, the APD4+ antenna splitter can provide antenna and power feeds.
Antennas Flexible TNC 1/2 Wave
Audio Frequency Response 80 Hz - 18kHz +/- 2dB
Battery Life 14 hours with (2) AA alkalines typical
Case Material Metal
Connector Type 1/4 inch unbalanced, 3-pin XLR balanced
Controls on/off, Set, Up, Down, Sync
Distortion (@ 1 kHz, 40 kHz deviation) less than 1.0, 0.4 typical %
Diversity True Antenna
Dynamic Range greater than 95 dB
Element PL22 Cardioid Dynamic
Power Supply 12 VDC, 500mA max
Receiver Type Synthesized PLL Agile UHF
RF Frequency Range 16 MHz
RF Output 8 mW typical
RF Sensitivity (12 dB SINAD) less than 1.0 uV
Signal-to-Noise Ratio (A-weighted) greater than 100 dB
Squelch Tone code plus Amplitude |
MicLink Wireless aims to take the complexity, frustration, and cost out of traditional wireless systems - creating a flexible, all-in-one solution that gets you up and running with the dynamic mic of your choice.
Main features
- Universal XLR transmitter converts any Lo-Z dynamic microphone into a wireless system
- Simple single-button pairing of transmitter/receiver; connects in seconds
- Enjoy up to 60 feet (18.3 m) of reliable connectivity and over 6 hours of battery life
- Lithium ion-powered transmitter conveniently recharges via USB
- Connect up to 5 wireless systems simultaneously
- Reliable 2.4 GHz spectrum; 14 Channels
- Compact receiver with 1/4' out and antenna; powered via battery (AAAx3) or included AC adapter
- Ideal for all but the largest sound environments: Small to medium stages, karaoke, public speaking, wedding, business presentations, and beyond
|
System Specifications - Operating Frequencies: UHF band - Band C: 541.500 MHz to 566.375 MHz (996 frequencies) - Band D: 655.500 MHz to 680.375 MHz (996 frequencies) - Band I: 482.000 MHz to 507.000 MHz (1001 frequencies) - Not all frequencies are available in all areas. Please check with local regulations. - Minimum Frequency Step: 25 kHz - Modulation Mode: FM - Maximum Deviation: +/-35 kHz - Dynamic Range: > 110 dB (A-weighted), typical - Total Harmonic Distortion: < 1% (at 1 kHz, +/-17.5 kHz deviation) - Operating Range: 100 m (300\'), typical - Open range environment with no interfering signals. - Operating Temperature Range: -5o C to +45o C (23o F to 113o F) - Battery and LCD performance may be reduced at very low temperatures. - Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB) Receiver - Receiving System: True diversity - Image Rejection: 60 dB nominal, 55 dB minimum - RF Sensitivity: 20 dBuV at 60 dB S/N ratio - Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV - Antenna Input: BNC-type, 50 ohms - Bias voltage 12V DC, 60 mA, each - Power Requirements: 12-18V DC, 500 mA - Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H, not including BNC connectors or feet. - Net Weight: 1.1 kg (38.8 oz), without accessories - Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters Handheld Transmitter - RF Power Output: High: 30 mW; Low: 10 mW, (switchable), at 50 ohms - Spurious Emissions: Following federal and national regulations - Microphone Element: ATW-T341b: Dynamic cardioid - Batteries: Two 1.5V AA, not included - Battery Life: High: 6 hours (alkaline) - Low: 8 hours (alkaline) - Depending on battery type and use pattern. - Dimensions: ATW-T341b: 237.0 mm (9.33“) long, 48.0 mm (1.89“) diameter - Net Weight: ATW-T341b: 284 g (10.0 oz), without batteries - Accessory Included: AT8456a Quiet-Flex(TM) stand clamp Dimensions and Weight in PackagingChannel D (655.500 MHz to 680.375 MHz)Shipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in Channel I (482.000 MHz to 507.000 MHz)Shipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in Channel C (541.500 MHz to 566.375 MHz)Shipping Weight: 6 lbs Shipping Dimensions: 16 x 14 x 4 in
|
192 CHN UHF TRUE DIVERSITY WIRELESS SYSTEM WITH 1,8 GHZ TECHNOLOGY
The LD Systems WS1G8 is an advanced 192 channel true diversity UHF wireless microphone system delivering natural sound with a wide dynamic range, high S/N ratio and low THD in the frequency range from 1785-1800 MHz. The WS1G8 series allows the use of up to 6 systems simultaneously and is shipped in various configurations. You can choose between dynamic or condenser handheld microphones, a beltpack transmitter with either a headset, lavaliere-microphone, clip-on wind instrument microphone or guitar adaptor cable. It provides consistent audio transmission from 60 Hz to 16 kHz. Handheld and belt pack feature convenient LCD indication of channel, group and battery status. Automatic channel scanning (ASC) and the backlit multifunction receiver display facilitate system setup and operation. The operating time ranges up to 13 hours with high quality AA batteries. All WS1G8 systems come with a rugged ABS plastic carrying case.
Set composed of:
- Model name: LDWS1G8MC
- Product type: Handheld microphone transmitter
- Radio frequency range: 1785 - 1.800 MHz
- Channels: 192 (16 groups of 12 channels)
- Microphone type: condenser
- Directional characteristic: cardioid
- Audio frequency response: 50 Hz - 16 kHz
- RF output: 10 mW
- Controls: Power On/Off
- Indicators: LC display
- Power supply: 2 x 1.5 V AA
- Operating time: up to 13 hrs., battery-dependent
- Length: 252 mm
- Diameter: 52 mm
- Model name: LDWS1G8R
- Product type: Receiver
- Type: True Diversity
- Radio frequency range: 1785 - 1.800 MHz
- Channels: 192 (16 groups of 12 channels)
- Antenna inputs: 2
- Antenna connector: TNC
- Frequency response: 50 Hz - 16 kHz
- Noise suppression: Squelch
- THD:
- Unbalanced audio output: XLR - 12 dBV (600 ohms) / 6.3 mm TRS - 18 dBV (3 kohms)
- Controls: Power On/Off, Set, Up, Down, ASC
- Indicators: LC display, 2 x 6-segment RF (A/B), antenna active (A/B), 7-segment AF
- Power supply: 12 - 18 V DC
- Width: 212 mm
- Height: 44 mm
- Depth: 160 mm
|
With LDs' WS100-X it is simple to use at least 8 systems simultaneously without interferences. All systems transmit in the frequency range of 838 - 865 MHz. According to the order 91/2005 of the German federal network agency, these frequencies have been approved for professional uses �" without additional charges or a registration in Germany. Otherwise the systems are identical to the common WS100 systems working at a frequency range of 790,850 MHz - 813,800 MHz. For the use of more than 4 systems we always recommend our WS100AD antenna splitter and our WS100DA directional antennas.
- Handheld with high-quality dynamic capsule
- Convenient handling and channel setting via ASC infrared frequency scanning
- LCD display of channel, group and battery status
- 2 AA batteries for up to 14 hours of operation
Technical Specifications:
LDWS100MDX:
Frequency Range: | 838 - 865 MHz | No. of channels: | 160 (10 groups of 16 CHN | Frequency Steadying: | 50 PPM (-10°C~50°C) | RF Output Power: | 10 dBm | Squrious Rejection: | > 55 dBc | Modulate: | 30 kHz at Input Level = 25 mV | Max Audio input level: | 0 dBV | Dimensions: | 252 mm* 50 mm dia | Weight: | 220 grams (without batteries) | Power Requirements: | 2 "AA" size | Battery Life: | up to 14 hours |
|
Reviews
There are no reviews yet.