Portable PA System Max. 180 Watt incl. CDM-3A Player with Remote Control Robust, rugged enclosure, built-in class D amplifiers system with 8″ woofer and 1″ tweeter. Up to 4 UHF or 2.4 GHz diversity receiver modules with 16 auto-scannable frequencies and built-in active antenna prevents accidental antenna breakage. Plug-&-play CD/MP3 player, plus certified Bluetooth receiver […]
Portable PA System Max. 180 Watt incl. CDM-3A Player with Remote Control Robust, rugged enclosure, built-in class D amplifiers system with 8″ woofer and 1″ tweeter. Up to 4 UHF or 2.4 GHz diversity receiver modules with 16 auto-scannable frequencies and built-in active antenna prevents accidental antenna breakage. Plug-&-play CD/MP3 player, plus certified Bluetooth receiver for music streaming. Voice Priority mutes music when a wireless mic is used. Echo effect for richer-sounding vocals. Industry’s only Master volume with “Memory” and “Standard” mode options. “Memory” mode saves and recalls last volume level during next power on. “Standard” mode resets to zero level. Industry’s only master volume that can be remotely controlled by an optional ACT-32HR transmitter microphone directly instead of a separate remote. Retractable handle and rugged wheels make it amazingly easy to transport. Built-in storage compartment for 2 handhelds or bodypack transmitters. Wirelessly link 2 or more MA-708 systems for more sonic coverage (industry’s only MTM-92 trans-mitter module is required). Active limiter prevents speaker damage from loud signal spikes. Can be powered via AC power, battery or direct DC. Weight:16kg
Max. Power Output
190 Watts
Amplifier
Class D
Sensitivity Typical
89db
Maximum
108db
T.H.D.
< 1%
Frequency Response
50 Hz – 18 kHz
Speaker Tweeter
1″ Compression Driver
Bass
8″ Woofer
Coverage
H80° x V60°
Audio Inputs Wired
XLR x 1, 6.3 mm (1/4 “) x 1
Wireless
Up to 4 wireless microphones
Audio Player
CDM-2︱DPM-3
Line-In
Unbalanced RCA jack
Bluetooth Connectivity
Yes
Audio Output
Unbalanced line RCA jack
Extension Speaker
Ø 6.3 mm (1/4 “) Phone jack
Master Volume Control Manually or Wirelessly via ACT-32HR
Controls
Tone, Voice Priority & Echo on wireless mics
Storage
2 handheld or bodypack transmitters
Installation
Speaker stand, flat surface or retractable handle & wheels
Power Supply AC
Built-in 100 ~ 240 V AC switching power supply (Max. Power Consumption 220 W)
DC & Battery
24 – 32 V DC, 12 V / 4.5 AH rechargeable gel cell battery (MB-70 × 2) or optional MB-80 × 2
Charge Time
8 hours (automatic charging management)
Standby Time
> 7 hours
Battery Indicator
4-level indicator (25/50/75/100%)
Color
Black or white option
Dimensions
336 x 545 x 325mm
Weight
16.3 kg 36 lbs (MB-70 batteries included)
Wireless System (optional)
Receiver
1 or 2 MRM-70B︱MRM-70W︱MRM-80︱MRM-24 Scan & ACT sync
Max. Receiver
Up to 4
Frequency Range
MRM-70B︱MRM-70W︱MRM-80
UHF 480 ~ 934 MHz (country dependent)
MRM-24
2.4 GHz
Preset Channels & Bandwidth
See Accessories – Receiver Modules
Transmitters
See Accessories – Receiver Modules
Microphones
MM-107︱MM-39︱MM-59 Wired Dynamic Microphone
Interlinking Transmitter
MTM-92
Installation
Plug-in Module
Antenna
Built-in
Audio Player (optional)
Model
CDM-2 | DPM-3
Installation
Plug-in Module
Note Refer to actual product in the event of product description discrepancy
Weight
17.00 kg
Reviews
There are no reviews yet.
Be the first to review “MIPRO MA-708D Portable speaker with Cd player/Bluetooth” Cancel reply
Plug-and-play lithium ion battery for up to 12 hours continuous operation
Practically unlimited power supply thanks to Quick-Swap Technology®
Provides sound to over 100 people
Ultra-light, portable 4-piece design that weighs only 12.4 kg
Integrated 4-channel mixer
Bluetooth® stereo audio streaming
All-in-one column speaker for PA and monitor applications
Increased range and broader coverage thanks to line-array design
Content
Portable PA System Max. 180 Watt incl. CDM-3A Player with Remote Control Robust, rugged enclosure, built-in class D amplifiers system with 8" woofer and 1" tweeter. Up to 4 UHF or 2.4 GHz diversity receiver modules with 16 auto-scannable frequencies and built-in active antenna prevents accidental antenna breakage. Plug-&-play CD/MP3 player, plus certified Bluetooth receiver for music streaming. Voice Priority mutes music when a wireless mic is used. Echo effect for richer-sounding vocals. Industry’s only Master volume with "Memory” and "Standard” mode options. "Memory” mode saves and recalls last volume level during next power on. "Standard” mode resets to zero level. Industry’s only master volume that can be remotely controlled by an optional ACT-32HR transmitter microphone directly instead of a separate remote. Retractable handle and rugged wheels make it amazingly easy to transport. Built-in storage compartment for 2 handhelds or bodypack transmitters. Wirelessly link 2 or more MA-708 systems for more sonic coverage (industry’s only MTM-92 trans-mitter module is required). Active limiter prevents speaker damage from loud signal spikes. Can be powered via AC power, battery or direct DC. Weight:16kg
Max. Power Output
190 Watts
Amplifier
Class D
Sensitivity Typical
89db
Maximum
108db
T.H.D.
< 1%
Frequency Response
50 Hz - 18 kHz
Speaker Tweeter
1" Compression Driver
Bass
8" Woofer
Coverage
H80° x V60°
Audio Inputs Wired
XLR x 1, 6.3 mm (1/4 ") x 1
Wireless
Up to 4 wireless microphones
Audio Player
CDM-2︱DPM-3
Line-In
Unbalanced RCA jack
Bluetooth Connectivity
Yes
Audio Output
Unbalanced line RCA jack
Extension Speaker
Ø 6.3 mm (1/4 ") Phone jack
Master Volume Control Manually or Wirelessly via ACT-32HR
Controls
Tone, Voice Priority & Echo on wireless mics
Storage
2 handheld or bodypack transmitters
Installation
Speaker stand, flat surface or retractable handle & wheels
Power Supply AC
Built-in 100 ~ 240 V AC switching power supply (Max. Power Consumption 220 W)
DC & Battery
24 - 32 V DC, 12 V / 4.5 AH rechargeable gel cell battery (MB-70 × 2) or optional MB-80 × 2
Charge Time
8 hours (automatic charging management)
Standby Time
> 7 hours
Battery Indicator
4-level indicator (25/50/75/100%)
Color
Black or white option
Dimensions
336 x 545 x 325mm
Weight
16.3 kg 36 lbs (MB-70 batteries included)
Wireless System (optional)
Receiver
1 or 2 MRM-70B︱MRM-70W︱MRM-80︱MRM-24 Scan & ACT sync
Max. Receiver
Up to 4
Frequency Range
MRM-70B︱MRM-70W︱MRM-80
UHF 480 ~ 934 MHz (country dependent)
MRM-24
2.4 GHz
Preset Channels & Bandwidth
See Accessories - Receiver Modules
Transmitters
See Accessories - Receiver Modules
Microphones
MM-107︱MM-39︱MM-59 Wired Dynamic Microphone
Interlinking Transmitter
MTM-92
Installation
Plug-in Module
Antenna
Built-in
Audio Player (optional)
Model
CDM-2 | DPM-3
Installation
Plug-in Module
Note Refer to actual product in the event of product description discrepancy
A professional 12" 500W Mobile Sound System featuring 2 UHF wireless microphones operating on different frequencies, remote control and integrated USB and SD slots for MP3 playing. This all in one system operates via mains or a 12V internal re-chargeable battery, powering a 12" main driver and a 1" HF driver. On the back there are 2 inputs and an echo effect for wired microphones, AUX line input, MP3 control unit, 5 controls for tonal adjustments etc. Due to this exciting system, premises and areas can be filled with an ear pleasing sound.
12" 500W active sound system
1" Titanium compression driver
BT receiver for audio streaming
Battery level indicator
Echo effect for microphones
Volume control for each UHF microphone
Integral USB, SD/MMC media player
Remote control for MP3 player
Mains or 12V battery operation
Integral trolley with telescopic handle
Rugged ABS case
Wattage: 500W
Frequency Response: 50 - 19.000 Hz
Type: Active Speaker
Speaker Type: 2-way Speaker
LF: 12" Cone
HF: 1" Voice Coil
Specifications: Playback options: Bluetooth, SD-Card, USB
Features: Battery: 12V - 12Ah, Frequency Handheld microphone 863.100 MHz, 864.500 MHz
Length: 350 mm
Width: 335 mm
Height: 570mm
Weight: 15.9 kg
LDRJ8 Battery Powered Bluetooth Loudspeaker with Mixer
The Road Jack Series 8" active 2-way system takes your sounds anywhere. With built-in wheels and extension handles for carting convenience the LDRJ8 features a 90 Hz - 18 kHz frequency range and 100 watts peak output. A rechargeable battery pack provides up to 20 hours of continuous operation.
The integrated mixer sports 3 channels with individual volume controls, a 2-band EQ plus adjustable reverb and master volume. Combo, 6.3 mm TRS jack, RCA and 3.5 mm TRS mini-jack connectors allow for a wide variety of input sources.
The LDRJ8\'s major feature is a built-in Bluetooth player which permits wireless streaming to the system. It also supports SD card and USB storage devices. The player menu includes language selection and multiple genre specific presets for instant EQ adjustment.
The LDRJ8 comes with a handy IR remote control and convenient stand mount insert.
Type: active
Woofer Size: 8“
Woofer Size: 203.2 mm
Woofer Magnet: ferrite
Woofer Brand: custom made
HF driver size: 3" (wide range)
HF driver size: 76.2 mm
HF driver magnet: ferrite
HF driver brand: custom made
Amplifier: class D
Power Output (RMS): 25 W
Power Output (Peak): 100 W
Frequency Response: 90 - 18.000 Hz
SPL (1 W/1 m): 94 dB
Max SPL: 113 dB
Protection: Short circuit, overvoltage, overload protection
Controls: Mic 1 Level, Mic 2 Level, CD / Tape IN Level, Low, High, Reverb, Master Volume, AUX / MP3 switch
Indicators: Power, charge/battery status
Media player
Supported media: Bluetooth, USB stick, SD card
Supported formats: MP3 file, WAV-CD, WMA-CD
Media player controls: Mode (Menu / Bluetooth /SD / USB) , Play / Pause, Stop, Repeat, Previous Track, Next Track)
Media player display elements: Lighted multifunctional LC display
Line Inputs: 1
Line Input Connectors: 2 x cinch, 3.5 mm jack
Mic Inputs: 2
Mic Input Connectors: XLR, 6.3 mm jack
Power Supply: switching power supply
Operating Voltage: 100 V - 120 V / 60 Hz, 220 V - 240 V / 50 Hz
rechargeable batteries: 12 V / 5 Ah
Cabinet Material: 15 mm MDF
Cabinet Type: bass reflex
Width: 385 mm
Height: 450 mm
Depth: 298 mm
Other Features: Stand mount 36 mm, transport castors, pull-out handle, carrying handle, IR Remote for Media Player
Power supply:
100-240 V AC, 50/60 Hz
Or
12 V DC
Protection class:
Protection class I
Output power:
80 W RMS
Power connection:
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
Battery/battery pack
Battery pack type:
1 x lithium ion 12,8 V, 8000 mAh, 102,4 Wh
Battery pack:
Battery operation up to 4h depending on program used
Recharging time 4h
Frequency range:
50 - 20000 Hz
THD:
<0,1 % at 1 kHz
Sensitivity:
98 dB (1W/1m)
Max. SPL:
121 dB
Control elements:
Level control per channel, Echo effect control, Talkover
Status LED:
Power, limit, charge status indicator
Connections:
Input: line via 1 x 3.5 mm jack (stereo) mounting version
Input: line via 1 x stereo RCA
Input: mic/line via 2 x 3-pin XLR/6.35mm jack (F) combination socket (mounting version)
Output: 3-pin XLR
Equalizer:
2-band tone control
Speaker:
1 x woofer 12" with ferrit magnet
1 x Tweeter 1"
Type of speaker:
Wireless PA system
Switch:
On/off switch
Material:
Plastic
Color:
Black
Dimensions:
Length: 31 cm
Width: 36 cm
Height: 56 cm
Weight:
13,12 kg
Audio player
Control:
Bluetooth; IR remote control
Bluetooth:
Version: 5 with stereo link (TWS)
Audio player:
USB + SD + Bluetooth
Range:
Bluetooth: range up to 20m
Frequency band:
2.4 GHz
Music format:
MP3, WMA
Available storage media:
USB devices/SD cards max. 32GB (FAT 32)
Microphone
Power supply:
3 V DC
Capsule type:
Dynamic
Polar pattern:
Cardioid
Battery:
2 x Mignon (AA) (not included)
Range:
Range up to 30m
Frequency band:
UHF 863 - 865 MHz
Dimensions:
Length: 24 cm
Diameter: Ø 5,1 cm
Remote control
Battery:
1 x Button cell 3.0 V CR2025 lithium manganese built-in
Features
Mobile 12" PA system with battery operation, audio player, Bluetooth and 2 wireless microphones
Portable all-in-one PA system with 80 watts output power
Cordless, flexible and versatile
3-channel power mixer
Power-efficient and battery-saving biamp amplifier with DSP control
Stereo Bluetooth link for wireless stereo operation with 2 systems linked together
2 mono input channels mic/line and hi-Z instrument (CH 2) with echo effect and feedback suppression
1 stereo input channel for internal audio player and external line signal sources with talkover switch
UHF receiver units and 2 matching wireless microphones
1 additional battery can be retrofitted for up to 8 hours operating time
Signal limiter and crossover, DSP-controlled
Common 2-band EQ for highs and lows
With accessory compartment
For application areas such as: Theater; mobile use; Wedding/gala/events; product presentations and lectures
Battery operation up to 4h depending on program used
Audio player
2.4 GHz license-free worldwide
Control via Bluetooth; IR remote control
Bluetooth: Operating range up to 20m
Microphone
Polar pattern: Cardioid
Operating range up to 30m
UHF 863 - 865 MHz License-free and approved in Europe
Package contents
2 x microphone, 2 x user manual, 1 x power cord, 1 x battery, 1 x compact cabinet speaker, 1 x declaration of conformity, 1 x battery pack, 1 x remote control, 2 x antenna
The LD Systems Roadman 102 is a mobile and compact sound system
The Roadman 102 is a compact and mobile PA solution with integrated battery. This system is perfectly suitable for solo entertainers, churches, schools, business conferences or presentations where versatility is required. The Roadman comes with a CD/MP3/USB/SD Player as well as a wireless microphone unit with handheld mic. A second wireless microphone unit are also available in option.
Product type
Battery-powered PA speaker
Type
Set with Handheld Transmitter
Low/mid driver dimensions
10 "
Woofer Size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
Amplifier
Class D
RMS
80 W
Peak power
320 W
Frequency response
70 - 16.000 Hz
SPL (1W/1m)
95 dB
Max. SPL
115 dB
Protection circuits
short circuit
Controls
Audio-link set (master / slave) , Audio-link slave volume , Bass , Line Gain , Master , Power , Speech / music switch (Mic / Line 1) , Speech / music switch (Mic / Line 2) , Tape volume , Treble , Value Down , Voice priority on / off , Volume Mic 1 , Volume Mic 2
Indicators
Charge/battery status , Power
Media player
Supported media
Audio-CD , CD-R , CD-R/W , SD Card , USB stick
Supported formats
Audio-CD , MP3 file , MP3-CD , WMA file , WMA-CD
Media player controls
CD ejector , Folder - , Folder + , Mode (CD / SD / USB) , mute , Next Track , Play / Pause , Power / Volume , Previous Track , Program , Repeat , Shuffle , Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
3
Line input connectors
2 x RCA , Audio-link input XLR, female
Mic inputs
2
Mic inputs
6.3 mm Jack , XLR
Line outputs
3
Line output connectors
2 x RCA , Audio-link output XLR, male
Loudspeaker outputs
Speaker Out Switched , Speaker Out Unswitched
Speaker output connections
6.3 mm Jack
Operating voltage
transformer
Operating voltage
200 V AC - 250 V AC , 24 V DC - 32 V DC (5A)
Rechargeable batteries
2 x 12 V / 4.5 AH
Cabinet material
aluminium , plastic
Cabinet construction
vented
Width
355 mm
Height
610 mm
Depth
315 mm
Weight
19 kg
Other features
additional radio receiver (LDRM102R) available optionally , Audio-link function , Cassette player available optionally , Stand mount 36 mm , Transport bag available optionally , Transport casters , transport handle , Trolley handle
Perfectly equipped throughout, the MAUI® 5 GO 100 is the ultimate system to deliver crystal-clear, powerful sound in any location. The ultra-portable battery-powered column-PA is supplied by a high-performance lithium-ion unit that provides power to 12 hours operating time. The charger is built into the subwoofer. An external charging dock is available as an accessory. Inputs for microphone, instrument and line signals as well as Bluetooth® stereo streaming make the MAUI® 5 GO 100 the ideal ideal system for street musicians or for music and speech reproduction at private and business events and all mains power-free applications.
Its superlight weight of just 12.4 kg makes the four-piece design ultra-easy to transport, and thanks to its special multipin connectors, it is assembled and ready to use in seconds. The line-array arrangement of the drivers achieves an extremely high range. The system’s wide dispersion and excellent feedback-resistance removes the need for separate monitors. With 800 watts peak power, the MAUI® 5 GO 100 is the loudest and best-sounding battery-powered PA system on the market, effortlessly providing sound for audiences of over 100 people.
For unparalleled sound quality in all applications, the column system features LD Systems' LECC DSP with multi-band limiter, equalizer, compressor and crossover. The integrated 4-channel mixer provides separate volume controls for the input channels, sum and subwoofer as well as a variable high-frequency boost to facilitate fast and balanced adjustment to the sound. LD Systems’ Quick-Swap Technology® also facilitates immediate and simple battery replacement for practically unrestricted operating times for the MAUI® 5 GO 100.
Specification
Product type
PA Complete Systems
Type
active
Number of subwoofers
1
Color
Black
Max. SPL (peak)
120 dB
Frequency response
50 - 20000 Hz
Dispersion (H x V)
120° x 20
Overall height
1985 mm
Weight
12,4 kg
Battery
Rechargeable batteries
29.36V / 3200 mAh
Battery manufacturer
LG Chem
Battery technology
Lithium-ion
Battery operation time at maximum load
12 hours @ 98 dB (Lounge), 4 hours at 120 dB (DJ mode), 6 h @ 104 dB (Live music)
Charging time
1.5 hours up to 80%, 2 hours up to 100%
Woofer Characteristics
Low/mid driver dimensions
8 "
Woofer size
203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Cabinet construction
Bass Reflex
Cabinet material
ABS plastic
Subwoofer width
305 mm
Subwoofer height
405 mm
Subwoofer depth
395 mm
Subwoofer weight
8.95 kg
Mid/Hi System
Midrange size
4 x 3 "
Midrange size
4 x 76.2 mm
Midrange magnet
Neodymium
Midrange brand
Custom-made
Midrange voice coil
1 "
Midrange voice coil
25.4 mm
Mid/Hi system impedance
4 Ohm(s)
Loudspeaker inputs
1
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
ABS plastic
Mid/Hi system width
82 mm
Mid/Hi system height
535 mm
Mid/Hi system depth
105 mm
Mid/Hi system weight
3.5 (3ps) kg
Amplifier module (integrated in Subwoofer)
Amplifier
Class D
Amplifier output system (RMS)
200 W
Amplifier output system (peak)
800 W
Protection circuits
DSP-based multiband limiter, over-current, short circuit, thermal overload
Cooling
Convection
Operating Temperature
0 - 50 °C
Controls
BT level, BT pairing, Line level, Main level, Mic level, Mono/stereo mode, MP3 / Hi-Z level, On / Off, Sub level
Indicators
Limit, On, Protect (protection circuit engaged), Signal
Operating voltage
Switching power supply
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz, 200 V AC - 240 V AC, 50 - 60 Hz (Automatic conversion)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.