Portable PA System Max. 180 Watt incl. CDM-3A Player with Remote Control Robust, rugged enclosure, built-in class D amplifiers system with 8″ woofer and 1″ tweeter. Up to 4 UHF or 2.4 GHz diversity receiver modules with 16 auto-scannable frequencies and built-in active antenna prevents accidental antenna breakage. Plug-&-play CD/MP3 player, plus certified Bluetooth receiver […]
Portable PA System Max. 180 Watt incl. CDM-3A Player with Remote Control Robust, rugged enclosure, built-in class D amplifiers system with 8″ woofer and 1″ tweeter. Up to 4 UHF or 2.4 GHz diversity receiver modules with 16 auto-scannable frequencies and built-in active antenna prevents accidental antenna breakage. Plug-&-play CD/MP3 player, plus certified Bluetooth receiver for music streaming. Voice Priority mutes music when a wireless mic is used. Echo effect for richer-sounding vocals. Industry’s only Master volume with “Memory” and “Standard” mode options. “Memory” mode saves and recalls last volume level during next power on. “Standard” mode resets to zero level. Industry’s only master volume that can be remotely controlled by an optional ACT-32HR transmitter microphone directly instead of a separate remote. Retractable handle and rugged wheels make it amazingly easy to transport. Built-in storage compartment for 2 handhelds or bodypack transmitters. Wirelessly link 2 or more MA-708 systems for more sonic coverage (industry’s only MTM-92 trans-mitter module is required). Active limiter prevents speaker damage from loud signal spikes. Can be powered via AC power, battery or direct DC. Weight:16kg
Max. Power Output
190 Watts
Amplifier
Class D
Sensitivity Typical
89db
Maximum
108db
T.H.D.
< 1%
Frequency Response
50 Hz – 18 kHz
Speaker Tweeter
1″ Compression Driver
Bass
8″ Woofer
Coverage
H80° x V60°
Audio Inputs Wired
XLR x 1, 6.3 mm (1/4 “) x 1
Wireless
Up to 4 wireless microphones
Audio Player
CDM-2︱DPM-3
Line-In
Unbalanced RCA jack
Bluetooth Connectivity
Yes
Audio Output
Unbalanced line RCA jack
Extension Speaker
Ø 6.3 mm (1/4 “) Phone jack
Master Volume Control Manually or Wirelessly via ACT-32HR
Controls
Tone, Voice Priority & Echo on wireless mics
Storage
2 handheld or bodypack transmitters
Installation
Speaker stand, flat surface or retractable handle & wheels
Power Supply AC
Built-in 100 ~ 240 V AC switching power supply (Max. Power Consumption 220 W)
DC & Battery
24 – 32 V DC, 12 V / 4.5 AH rechargeable gel cell battery (MB-70 × 2) or optional MB-80 × 2
Charge Time
8 hours (automatic charging management)
Standby Time
> 7 hours
Battery Indicator
4-level indicator (25/50/75/100%)
Color
Black or white option
Dimensions
336 x 545 x 325mm
Weight
16.3 kg 36 lbs (MB-70 batteries included)
Wireless System (optional)
Receiver
1 or 2 MRM-70B︱MRM-70W︱MRM-80︱MRM-24 Scan & ACT sync
Max. Receiver
Up to 4
Frequency Range
MRM-70B︱MRM-70W︱MRM-80
UHF 480 ~ 934 MHz (country dependent)
MRM-24
2.4 GHz
Preset Channels & Bandwidth
See Accessories – Receiver Modules
Transmitters
See Accessories – Receiver Modules
Microphones
MM-107︱MM-39︱MM-59 Wired Dynamic Microphone
Interlinking Transmitter
MTM-92
Installation
Plug-in Module
Antenna
Built-in
Audio Player (optional)
Model
CDM-2 | DPM-3
Installation
Plug-in Module
Note Refer to actual product in the event of product description discrepancy
Weight
17.00 kg
Reviews
There are no reviews yet.
Be the first to review “MIPRO MA-708D Portable speaker with Cd player/Bluetooth” Cancel reply
Portable PA System Max. 180 Watt incl. CDM-3A Player with Remote Control Robust, rugged enclosure, built-in class D amplifiers system with 8" woofer and 1" tweeter. Up to 4 UHF or 2.4 GHz diversity receiver modules with 16 auto-scannable frequencies and built-in active antenna prevents accidental antenna breakage. Plug-&-play CD/MP3 player, plus certified Bluetooth receiver for music streaming. Voice Priority mutes music when a wireless mic is used. Echo effect for richer-sounding vocals. Industry’s only Master volume with "Memory” and "Standard” mode options. "Memory” mode saves and recalls last volume level during next power on. "Standard” mode resets to zero level. Industry’s only master volume that can be remotely controlled by an optional ACT-32HR transmitter microphone directly instead of a separate remote. Retractable handle and rugged wheels make it amazingly easy to transport. Built-in storage compartment for 2 handhelds or bodypack transmitters. Wirelessly link 2 or more MA-708 systems for more sonic coverage (industry’s only MTM-92 trans-mitter module is required). Active limiter prevents speaker damage from loud signal spikes. Can be powered via AC power, battery or direct DC. Weight:16kg
Max. Power Output
190 Watts
Amplifier
Class D
Sensitivity Typical
89db
Maximum
108db
T.H.D.
< 1%
Frequency Response
50 Hz - 18 kHz
Speaker Tweeter
1" Compression Driver
Bass
8" Woofer
Coverage
H80° x V60°
Audio Inputs Wired
XLR x 1, 6.3 mm (1/4 ") x 1
Wireless
Up to 4 wireless microphones
Audio Player
CDM-2︱DPM-3
Line-In
Unbalanced RCA jack
Bluetooth Connectivity
Yes
Audio Output
Unbalanced line RCA jack
Extension Speaker
Ø 6.3 mm (1/4 ") Phone jack
Master Volume Control Manually or Wirelessly via ACT-32HR
Controls
Tone, Voice Priority & Echo on wireless mics
Storage
2 handheld or bodypack transmitters
Installation
Speaker stand, flat surface or retractable handle & wheels
Power Supply AC
Built-in 100 ~ 240 V AC switching power supply (Max. Power Consumption 220 W)
DC & Battery
24 - 32 V DC, 12 V / 4.5 AH rechargeable gel cell battery (MB-70 × 2) or optional MB-80 × 2
Charge Time
8 hours (automatic charging management)
Standby Time
> 7 hours
Battery Indicator
4-level indicator (25/50/75/100%)
Color
Black or white option
Dimensions
336 x 545 x 325mm
Weight
16.3 kg 36 lbs (MB-70 batteries included)
Wireless System (optional)
Receiver
1 or 2 MRM-70B︱MRM-70W︱MRM-80︱MRM-24 Scan & ACT sync
Max. Receiver
Up to 4
Frequency Range
MRM-70B︱MRM-70W︱MRM-80
UHF 480 ~ 934 MHz (country dependent)
MRM-24
2.4 GHz
Preset Channels & Bandwidth
See Accessories - Receiver Modules
Transmitters
See Accessories - Receiver Modules
Microphones
MM-107︱MM-39︱MM-59 Wired Dynamic Microphone
Interlinking Transmitter
MTM-92
Installation
Plug-in Module
Antenna
Built-in
Audio Player (optional)
Model
CDM-2 | DPM-3
Installation
Plug-in Module
Note Refer to actual product in the event of product description discrepancy
LD Systems Roadman 102 HS B6 Portable PA Speaker with Headset Microphone
The LD Systems Roadman 102 HS B6 is a mobile and compact sound system
The Roadman 102 HS B5 is a compact and mobile PA solution with integrated battery. This system is perfectly suitable for solo entertainers, churches, schools, business conferences or presentations where versatility is required. The Roadman comes with a CD/MP3/USB/SD Player as well as a wireless microphone unit and headset. A second wireless microphone unit can also be integrated as an option.
Product type
Battery-powered PA speaker
Type
Set with Handheld Transmitter
Low/mid driver dimensions
10 "
Woofer Size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
Amplifier
Class D
RMS
80 W
Peak power
320 W
Frequency response
70 - 16000lx @ 1m Hz
SPL (1W/1m)
95 dB
Max. SPL
115 dB
Protection circuits
short circuit
Controls
Audio-link set (master / slave) , Audio-link slave volume , Bass , Line Gain , Master , Power , Speech / music switch (Mic / Line 1) , Speech / music switch (Mic / Line 2) , Tape volume , Treble , Value Down , Voice priority on / off , Volume Mic 1 , Volume Mic 2
Indicators
Charge/battery status , Power
Media player
Supported media
Audio-CD , CD-R , CD-R/W , SD Card , USB stick
Supported formats
Audio-CD , MP3 file , MP3-CD , WMA file , WMA-CD
Media player controls
CD ejector , Folder - , Folder + , Mode (CD / SD / USB) , mute , Next Track , Play / Pause , Power / Volume , Previous Track , Program , Repeat , Shuffle , Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
3
Line input connectors
2 x RCA , Audio-link input XLR, female
Mic inputs
2
Mic inputs
6.3 mm Jack , XLR
Line outputs
2 x sat output 100 Hz
Line output connectors
2 x RCA , Audio-link output XLR, male
Loudspeaker outputs
Speaker Out Switched , Speaker Out Unswitched
Speaker output connections
6.3 mm Jack
Transmission frequency range
655 - 679 MHz
Operating voltage
transformer
Operating voltage
200 V AC - 250 V AC , 24 V DC - 32 V DC (5A)
Rechargeable batteries
2 x 12 V / 4.5 AH
Cabinet material
aluminium , plastic
Cabinet construction
vented
Width
355 mm
Height
610 mm
Depth
315 mm
Weight
19 kg
Other features
additional radio receiver (LDRM102R) available optionally , Audio-link function , Cassette player available optionally , Stand mount 36 mm , Transport bag available optionally , Transport casters , transport handle , Trolley handle
BOSE S1 Pro System with Battery Bundle with Skin Cover
BOSE S1 Pro System with Battery
Specifications :
Designed for musicians, DJs, and general PA use, the S1 Pro is the ultimate all-in-one PA, floor monitor, practice amplifier and primary music system. Multiple positions, supported by Auto EQ, ensure that you always sound your best. And with a 3-channel mixer, reverb, Bluetooth streaming and ToneMatch processing onboard, the S1 Pro is ready to be your go-anywhere PA.
High-output sound from a small, convenient system that is ready to perform whenever and wherever you are.
Lightweight, ultra-portable enclosure is designed to transport effortlessly using the convenient carry-handle.
Rechargeable lithium-ion battery allows you to perform anywhere for hours.
Onboard 3-channel mixer offers independent ToneMatch, reverb, and EQ controls on two channels, with a dedicated channel for either wired (3.5 mm) or wireless music sources.
Wireless Bluetooth streaming from your mobile device, with one-touch pairing.
Multiple positions with Auto EQ ensure that you always sound your best, regardless of placement orientation.
Speaker stand compatible with standard 35 mm pole mounts.
Frequency Response (+/-3 dB), 62 Hz – 17 kHz
Nominal Dispersion, 120° H x 50° V
Maximum SPL @ 1 m, 103 dB (109 dB Peak)
Weight, 7.1 kg
BOSE S1 Pro Skin Cover Black
Specifications :
Play-Through Cover for S1 Pro
Self-Amplifying Speaker 12" - 500W with Battery - 2 Wireless Microphones - Bluetooth Portable System 12"
Ideal for karaoke parties
RMS power 250W
Power MAX 500W
2 x Wireless UHF Handheld Microphones
2 x Inputs for Wired Handheld Microphones
1 x Input for guitar
Battery with autonomy 6-8 hours
Ability to power via external 12V DC battery
Echo & Delay Effects
Bluetooth receiver
SD CARD reader, USB, Radio, IR remote control
Jack for support on a speaker stand
Weight:14.95Kg
RoadMan 102 Slave Speaker Box to loop in until 20 units (incl. 24V DC rechargeable Battery and Power supply)
Product type
Battery-powered PA speaker accessories
Type
active, Follower loudspeaker
Low/mid Woofer dimensions
10 "
Woofer dimensions (mm)
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Amplifier
Class D
System Power (RMS)
80 W
Peak power
320 W
Frequency response
70 - 16.000
SPL (1W/1m)
95 dB
Max. SPL
115 dB
Protection circuits
short circuit
Controls
Audio-Link Follower Volume, Power
Indicators
Charge/battery status
Line inputs
1
Line input connectors
Audio-link input XLR, female
Line outputs
1
Line output connectors
Audio-link output XLR, male
Operating voltage
transformer
Operating voltage
200 V AC - 250 V AC, 24 V DC - 32 V DC (5A)
Rechargeable batteries
2 x 12 V / 4.5 AH
Width
355 mm
Height
610 mm
Depth
315 mm
Other features
Stand mount 36 mm, Transport bag available optionally, transport handle, Trolley handle
Weight
18 kg
The compact, flexible sound system for small events, conferences, multimedia applications, podium discussions, schools, churches, etc.
The ultra-compact battery-powered combo amplifier, measuring 30 cm x 22 cm and weighting only 5 kg, pro-vides an impressive sound pressure level (> 105 dB) and audibility, and is equipped with features unique for its size.
Standard Features :
CD/MP3 player with USB connection and volume control
1 x UHF PLL 16CHN diversity wireless unit with dynamic handheld (WS1601MD)
1 x MIC in / AUX in /AUX out
2 band equalisation
Voice priority (talkover) function
DC in (12-15 V 4A)
90-240 V AC switching power supply
Rechargeable battery type 12 V / 2.7 AH (up to 4 hours lifetime)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Quick Start Guide
Reviews
There are no reviews yet.