MIPRO MU-23 Dual-Sided Headworn Microphone 50Hz~18KHz

• Compact ear-hook design for a secure, ultra comfortable fit.
• Supplied in three ear-hook sizes for ideal fit.
• Detachable boom can be worn on left or right & detached for replacement or servicing.
• MU-23 features a 3mm omni-directional capsule.
• Resistant to moisture, perspiration and salts.
• Detachable or fixed microphone boom options.
• Soft yet flexible thin boom bends 120° and holder can be rotated for an ideal fit.
• Ideal for speech and vocal applications.

• Type: condenser
• Directional characteristic: cardioid
• Frequency response: 70–16,000 Hz
• Nominal impedance: 1.4 kOhm

The AKG C520L is a head-worn condenser microphone with maximum dynamic range for perfect vocal sound.

The AKG C520L can be used with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering.

The AKG C520L is an ideal choice for frontmen, singing keyboardists, drummers, guitarists, and dancers. The microphone arm mounts either on the left or right side of the headband as desired. Its cardioid polar pattern effectively rejects unwanted ambient noise. The C 520 provides the perfect solution for any performer needing a handsfree microphone.

A transducer shock mount reduces handling noise to a minimum. The moisture shield prevents perspiration from penetrating into the transducer element, ensuring a high degree of humidity protection for the microphone.

AKG C520L main features include:

• Head-worn microphone with continuously adjustable behind-the-neck headband
• External shock mount for high mechanical-noise rejection
• Miniature gooseneck for precise positioning near the user's mouth
• Microphone arm provides choice of left or right-hand use
• Polar pattern: cardioid
• Frequency range: 60 Hz to 20 kHz
• Sensitivity: 5 mV/Pa (-46 dBV)
• Max. SPL: 130 dB/132 dB (for THD = 1 %/3 %)
• Equivalent noise level: 31 dB-A
• Impedance: = 2000 ohms
• Connector:3-pin mini XLR
• Cable: C 520 L: 1.5 m (5 ft.)
• Finish: matte black
• Dimensions: length: 195 mm (7.7 in.) (microphone only); max. diameter: 134 mm (5.3 in.)
• Net weight: 26 g (0.9 oz.)

Shure WCM16 Headworn Condenser Microphone

The Shure Model WCM16 headworn electret condenser microphone is intended for wireless use by
performers, lecturers, and others who require the highest quality voice pickup with maximum mobility.
Its wide frequency response, low RF susceptibility and reliable operation at temperature and humidity
extremes make the WCM16 suitable for virtually any vocal application. When used with the Shure bodypack
transmitters, the performance of the WCM16 closely resembles the finest conventional vocal microphones.

 Miniaturized active circuitry included in the cartridge assembly provides equalization that tailors the low-frequency
response to resemble the warmproximity effect of larger vocal microphones. Because of this low-end response, it
is not necessary to position the microphone directly in front of the mouth, thus avoiding much popping and breath
noise, even without the supplied foam pop screen.

 The microphone's hypercardioid unidirectional pickup pattern provides maximum isolation from ambient noise and
from adjacent sound sources such as musical instruments, loudspeakers and other performers. This permits higher
gain-before-feedback without loss or masking of vocals.

Features:

Extra lightweight, adjustable headband stays secure and virtually disappears while being worn
Response comparable to finest conventional vocal microphones
Hypercardioid polar pattern provides maximum isolation from vocalist's own instrument and those of other performers
Uniform polar pattern at all frequencies for maximum gain before feedback
High input clipping level eliminates overload distortion
Cable terminates as 4-pin mini connector
Supplied acoustic foam pop screen
Reliable at temperature and humidity extremes

Specifications:

Frequency Response
50 to 18,000 Hz
Polar Pattern
Hypercardioid, uniform with frequency
Output Impedance
1200 ohms
Output Level (close-talked at 1,000 Hz)
Open Circuit Voltage -55.0 dbV (1.8 mV) at 0.6 m
1 Pascal=94 db SPL
Maximum Sound Pressure Level
150 dB at 1% THD
Dynamic Range
121 dB
Output Noise
29 dB equivalent SPL, A-weighted
Signal-to-Noise Ratio
65 dB at 94 dB SPL
Polarity
Microphone: Positive sound pressure on diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground) of microphone output connector
Receiver-- 1/4" Phone Jack Output: Positive sound pressure on diaphragm produces positive voltage on tip of receiver 1/4" output connector
Receiver-- XLR Output: Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of the XLR output connector
Current Drain
0.35 mA
Recommended Operating Voltage
+5 Vdc (positive on pin 2, negative on pin 1)
Environmental Conditions
Operating Temperatures: -18 to 60 degrees C (0 to 140 degrees F)
Storage Temperatures: -29 to 66 degrees C (-20 to 150 degrees F)
Humidity: 0 to 95%
Cable
1.5m (5 ft), small-diameter, shielded, with 4-pin mini connector
Case Finish (Microphone and Headband)
Matte black enamel
Net Weight
36 g (1.27 oz)

Transducer     Condenser
Polar Pattern     Omnidirectional
Frequency Response     30Hz to 20kHz +/- 3dB
Dynamic Range (Typical)     Not Specified by Manufacturer
Signal-to-Noise Ratio     Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level     130dB SPL
Power Requirements     Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance     2k ohms
Output Connectors     TA4-Female Connector for Shure Wireless Transmitters
Dimensions     Not Specified by Manufacturer
Weight     0.07 oz (2g)