| Content |
- Proprietary over-the-ear, shapeable frame design for an ultra secure, comfortable fit.
- Supplied in three earworn sizes for ideal fit.
- Fixed or detachable boom can be worn on left or right and detached for replacement or servicing.
- Subminiature 3mm omni-directional condenser capsule.
- Resistant to moisture, perspiration and salts.
- Detachable cables with various types of plug are available.
- Soft yet flexible thin boom can be bent 120° and boom holder can be height rotated for an ideal fit.
- Ideal for speech applications.
|
Capsule Diameter
|
3mmØ omni-directional condenser capsule
| |
Frequency Response
|
40Hz~20kHz
| |
Sensitivity
|
-56dBV±3dBV/Pa (0dB=1V/Pa)
| |
Maximum SPL
|
138dB (Typical, 1%THD)
| |
Boom Holder
|
Single-side
| |
Plug
|
4-pin mini XLR (screw-lock)
| |
Cable Length
|
150cm / 59“
| |
Color
|
Beige
| |
Weight
|
Approx. 16g / 0.56oz
| |
Note
|
Refer to actual product in the event of specification discrepancies
|
| Features
- Excellent feedback rejection
- Microphone includes a detachable cap as integral wind/popshield
- Individually adjustable to all head sizes
- Neckband design keeps the microphone clear from shirt-collar or clothing
- Twist-proof microphone boom (Ø 2.0 mm), can be attached to the left or right side
- Microphone boom is adjustable in length and angle
- Flexible gooseneck section
- Connection cable can easily be interchanged
- All metal parts coated in a physical vapour deposition process
- Can also be used with the omni-directional HSP 2 boom microphone
Delivery Includes
- Boom microphone
- Neckband
- Connection cable
- Plastic transport case, foam-lined with cut-outs
- Operating instructions
Technical Data
- Pick-up pattern cardioid
- Frequency response 40...20 000 Hz
- Nominal impedance (@ 1 kHz) 1000 Ohm
- Min. terminating impedance 4700 Ohm
- Sensitivity in free field, no load (1kHz) 4 mV/Pa
- Maximum sound pressure level (passiv) 150 dB
- Equivalent noise level 37 dB(A)
- Current consumption ca. 250 µA
- Operating voltage (stand alone) 4,5-15 V
- Cable length 1,6 m
- Diameter microphone head 8,4 mm
- Diameter boomarm 2,4 mm
- Weight 9,2 g (without cable)
|
Features:
Smallest, lightest, most comfortable microphone of its kind
User-friendly for new and experienced users alike
Excellent for singing and spoken word applications
Extremely popular in houses of worship, theater and broadcast settings
Almost invisible against many skin tones
Rugged, bendable boom assures a custom fit for every wearer
Hands-free, wireless-enabled microphone allows total freedom of movement
Exclusive snap-on cables in 1mm or 2mm diameter for field replacement or compatibility with various wireless systems
Highly resistant to sweat and moisture
High quality voice pickup - more consistent than any lavalier
Excellent rejection of surrounding noise
Reduces feedback in meeting rooms or houses of worship an average of 12dB compared to an omni lavalier
Omnidirectional microphone is virtually immune to wind and breath pops, even without a windscreen
|
Transducer Condenser
Polar Pattern Omnidirectional
Frequency Response 30Hz to 20kHz +/- 3dB
Dynamic Range (Typical) Not Specified by Manufacturer
Signal-to-Noise Ratio Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level 130dB SPL
Power Requirements Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance 2k ohms
Output Connectors TA4-Female Connector for Shure Wireless Transmitters
Dimensions Not Specified by Manufacturer
Weight 0.07 oz (2g) | Shure WH20TQG Dynamic Headset Microphone Shure Performance MicrophonesDynamic Headset Microphone
The improved version of the WH10, the Shure Model WH20TQG is a rugged, light-weight, dynamic headset microphone that provides high-quality voice pickup. It fits securely for active microphone users, such as aerobics instructors and musicians, with low visibility for stage appearances. The WH20 is suitable for any voice communications application where comfort and reliability are required.
The WH20 TQG has a cardioid (unidirectional) pickup pattern. This provides greater gain-before-feedback and isolation from ambient noise and other unwanted sound sources, such as air-conditioning, musical instruments and loudspeakers. A carefully shaped frequency response includes a voice-frequency presence peak and a low-frequency rolloff to compensate for the proximity effect inherent in cardioid microphones during close-talk operation.
An integrated elastic CROAKIES ? headband secures the headset comfortably. The headband, wireframe, and gooseneck are adjustable to accommodate any head size or shape. The WH20 TQG is supplied with a foam windscreen and clothing clip.
Features:
- Lightweight wireframe and headband adjust for a secure, comfortable fit
- Extra-strong, small-diameter attached microphone cable resists breakage
- Collapsible microphone boom for easy storage and transportation
- Smooth, natural frequency response comparable to high-quality dynamic hand-held vocal microphones
- High input clipping level eliminates overload distortion
- Reliable at temperature and humidity extremes
- Supplied foam windscreen and clothing clip
- The WH20TQG has a miniature four-pin female Tini "QG" connector for direct connection to Shure wireless body pack transmitters - This microphone to be used ONLY with an existing Shure body-pack transmitter.
Transducer
|
Dynamic, close-talking |
| Polar Pattern |
Cardioid |
| Frequency Response |
50 Hz to 15 kHz, Measured @ 0.3" (8.0 mm) |
| Power Requirements |
Dynamic (Requires NO Phantom Power) |
| Impedance |
150 ohms (200 ohms actual) |
| Output Level |
Open Circuit Voltage: -67 dB/Pa (1.48' / 0.45 m)
1 Pa = 94 dB SPL
Close-talked (@ 0.50" / 12.5 mm) @ 1,000 Hz |
| Electromagnetic Hum Sensitivity |
38.4 dB equivalent SPL in a 1 mOe field |
| Operating Temperature |
0 to 140°F (-18 to 60°C) |
| Storage Temperature |
-20 to 165°F (-29 to 74°C) |
| Connector |
TA4F connector for Shure bodypack transmitters |
| Cable Length |
4.0' (1.2 m) |
| Dimensions |
Not specified by manufacturer |
| Weight |
2.2 oz (63 g) including connector |
| Packaging Info |
| Package Weight |
0.7 lb |
| Box Dimensions (LxWxH) |
7.6 x 6.4 x 3.1" |
| Light, easy-to-wear, beige-coloured headset condenser microphone with 3-pin mini XLR connector
- Type: condenser
- Directional characteristic: cardioid
- Frequency response: 70–16,000 Hz
- Nominal impedance: 1.4 kOhm
Product type
Wireless Microphone System Accessories
Type
Headsets
Colour
beige
Frequency response
70 - 16.000 Hz
Directivity
Cardioid
Nominal impedance
1400 Ohm(s)
Max. SPL
125 dB
Phantom power requierements
5 V
Microphone input
Mini-XLR (3-pin, female)
Accessories (included)
Foam windscreen
Weight
0,2 kg |
Reviews
There are no reviews yet.