| Content |
For over a decade, MIPRO wire & wireless condenser handheld microphones provide clear, detailed sound quality and become preference of audio professionals.
MM-89 with MU-89 capsule module. The exterior multi-layer metal grille protects the capsule to prevent impact and pop noise. The upper exterior grille is able to be detached easily for cleaning and hygiene practices.
They provide superb directionality and feedback suppression for bright and detailed sound quality. Proprietary capsule suspension design eliminates vibrations and touch noise characteristics for natural sound reproduction.
External 12~48V DC phantom power is required for MM-89 microphone.
Ideal for stage, broadcast, studios and musical hall applications.
|
Housing
|
Die-cast Zinc Alloy Metal Housing
| |
Directionality
|
Cardioid
| |
Sensitivity
|
-46dB± 1dBV/Pa (0dB=1V Open-circuit voltage)
| |
Frequency Response
|
50Hz~20kHz @94dB SPL
| |
Self-Noise
|
72dB @94dB SPL (1Pa)
| |
Max. Input SPL
|
147dB (Typical, 1% THD)
| |
Dynamic Range
|
125dB
| |
Power Supply
|
External phantom power 12~52V DC
| |
Current Consumption
|
5.6 mA
| |
Output Impedance
|
200Ω
| |
Dimensions
|
50(Ø)×189(L)mm / 2.0(Ø)×7.4(L)“
| |
Weight
|
Approx. 285g / 10oz
| |
Note
|
Refer to actual product in the event of product discrepancy
|
|
Technical specifications | Polar pattern | | hypercardioid | | Frequency range | | 50 to 20,000 Hz | | Sensitivity | | 20 mV/Pa (?34 dBV) | | Max. SPL | | 125 dB (k=1 %) | | Equivalent noise level | | 21 dB-A | | Signal/noise ratio (A-weighted) | | 73 dB | | Impedance | | 600 ohms | | Recommended load impedance | | >2000 ohms | | Supply voltage | | 9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules) | | Current consumption | | | | Connector | | Discreet Acoustics Modular standard | | Finish | | matte dark gray | | Dimensions | | 13.5 x 20 mm dia. (0.5 dia. x 0.8 in.) | | Net weight | | 5 g (0.17 oz.) | | Shipping weight | | 88 g (3.1 oz.) | | Accessories (included) | | W 30 |
| The NT5 matched pairs are a masterpiece of small-diaphragm cardioid-
condenser microphone design.Intended for recording acoustic instruments,
drum overheads, cymbals and live performances, the compact externally
polarized mic employs a .5? capsule, an active J-FET impedance converter
with bipolar output buffer.
Finished in durable satin nickel, the NT5 is intended for either single or stereo
X/Y mic set-ups. The NT5 matched pairs comesupplied in a custom carry case
with windshields and mounts.
SPECIFICATIONS:
Acoustic principle: Externally polarised single diaphragm
Directional pattern: Cardioid
Frequency range: 20Hz - 20kHz
Output impedance: 100?
Signal noise ratio din iec 651: 78dB
Equvalent noise: Maximum spl: 143 dB @ 1% THD into 1k_
Sensitivity:
-38 dB re 1v/Pa ± 2 dB equivalent to 12mV/Pa where 1 Pa = 94dBSPL
Power supply voltage: P48 Supply (38V?52V), P24 Supply (20V-26V)
Current consumption: 4 mA, 2 mA,
Weight: 100g | Specifically designed for cymbal and overhead miking, the frequency response of the C 430 ensures a unique crisp sound. With its extremely compact external dimensions, this microphone will keep a low profile on the drum kit without compromising audio quality. Response is 20-20kHz, with 126dB max SPL, and requires phantom power.
Specifications
Polar Pattern: cardioid
Frequency Response: 20?20.000 Hz
Sensitivity: 7 mV/Pa=-43 dBV to 1 V/Pa
Max. SPL for 1% / 3% THD: 126/130 dB SPL
Equivalent Noise Level: 33 dB to DIN 45 412
Electrical Impedance: 200 ohms
Recommended Load Impedance: >2.000 ohms
Power Requirement: 9 to 52 volts universal phantom power
Current Consumption: approx. 2 mA
Connector : 3-pin XLR
Cable Length: 1.5 m (5 ft.)
Finish: matte black
Size : dia.: 19 mm (0.7 in.), length: 79 mm (3.1 in.)
Net / Shipping Weight: 23/192 g (0.8/6,8 oz.)
Optional Accessorires: B15, B18 |
Back-electret Microphone Capsule suitable for K6 and K6P Powering Modules. The ME 64 is a cardioid microphone capsule designed for use with the K6 and K6P powering modules. It has a very wide range of applications including reporting, interviews, dubbing, live sound reinforcement and recording applications. Matte black, anodized, scratch-resistant finish.
Features
Excellent directivity across whole frequency range
Very good feedback rejection
Effective rejection of incidental rear noise
High speech clarity
High maximum sound pressure level
Wide frequency range
Integrated pop filter
|
The e 914 is a high grade condenser microphone for very demanding applications.
Its outstanding sound properties qualify the e 914 for highly sophisticated tasks.
The e 914 is a perfect microphone for ambitious recordings and live performances.
Its main areas of application are acoustic guitars, cymbals, percussion, overhead,
orchestras, grand pianos etc .
Features
Exceptionally lively, clear sound
Three-position sensitivity switch
Three-position bass roll-off/cut-off switch
Very high sound pressure handling capability
Exchangeable microphone capsule
Delivery Includes
e 914 microphone
Microphone clamp
Windscreen
Pouch
User manual
Technical Data
Pick-up pattern cardioid
Frequency response 20...20 000 Hz
Sensitivity in free field, no load (1kHz) 7 mV/Pa
Equivalent noise level 19 dB(A)
Attenuation 0, -10, -20 dB
Max. Sound pressure level (aktiv) 137, 147, 157 dB
Nominal impedance 100 Ohm
Min. terminating impedance 1000 Ohm
Dimensions 24 x 157 mm
Weight 198 g
|
Reviews
There are no reviews yet.