AKG D 112 MKII DYNAMIC Microphone FOR KICK BASS OR BASS AND TROMPONES

211.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Cardioid Polar Pattern Specialized for Bass Guitar/Drum Response Maintained to 20 Hz Very Low THD Built-In Windscreen Built-In Swivel Mount The AKG D112 MKII Pro Dynamic Bass Microphone is a descendant of AKG\’s D112 and earlier D12 dynamic microphone, and is widely known for its ability to handle high-level signals from bass drums and bass […]

 

Read more

  • Cardioid Polar Pattern
  • Specialized for Bass Guitar/Drum
  • Response Maintained to 20 Hz
  • Very Low THD
  • Built-In Windscreen
  • Built-In Swivel Mount

The AKG D112 MKII Pro Dynamic Bass Microphone is a descendant of AKG\’s D112 and earlier D12 dynamic microphone, and is widely known for its ability to handle high-level signals from bass drums and bass guitars in the studio. The microphone has been designed with a low resonance frequency and can handle very high transient signals with low distortion. It has a large dynamic range with a high signal-to-noise ratio and the capacity to input high sound levels without distorting. High frequency response has been tailored to keep both bass drum and bass guitar clearly distinguishable in the mix. A built-in windscreen makes the D112 also suitable for high SPL instruments such as the trombone and tuba.

Cardioid-pattern microphoneBuilt-in swivel mountResponse tailored for bass guitar and bass drum pickup, both in the studio and on-stageResponse maintained down to 20 HzBuilt-in windscreen

General Specifications

Capsule Dynamic microphone capsule
Polar Pattern Cardioid
Audio frequency bandwidth 20 – 17000 Hz
Max. SPL for 0.5 % THD > 160 dB (calculated)
Electrical impedance 210 Ohms
Recommended load impedance ≥ 2000 Ohms
Sensitivity 1.8 mV/Pa (-55 dBV)
Temperature Range -10 °C to +60 °C (14 °F – 140 °F)

Dimensions

Length 115 mm (4.53 in.)
Height 126 mm (4.96 in.)
Diameter 70 mm
Net Weight mic only 300 g (10.6 oz.)

Audio Output

Type Balanced XLR
Gender Male
Contacts 3-pin

Application

Pro Studio Yes
Project Studio Yes
Live Instrument Yes

Instrument

Drums / Percussion Yes
Guitar Amps / Bass Amps Yes

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “AKG D 112 MKII DYNAMIC Microphone FOR KICK BASS OR BASS AND TROMPONES”

Your email address will not be published. Required fields are marked *

Quick Comparison

AKG D 112 MKII DYNAMIC Microphone FOR KICK BASS OR BASS AND TROMPONES removeAKG C 451B B/ST Matched Pair removeAKG D 40 Dynamic Instrument Microphone removeSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz removeSHURE Beta98HC - clip on condenser instrument mic removeSHURE SM-57LCE - Dynamic Instrument Microphone remove
NameAKG D 112 MKII DYNAMIC Microphone FOR KICK BASS OR BASS AND TROMPONES removeAKG C 451B B/ST Matched Pair removeAKG D 40 Dynamic Instrument Microphone removeSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz removeSHURE Beta98HC - clip on condenser instrument mic removeSHURE SM-57LCE - Dynamic Instrument Microphone remove
ImageSHURE BETA-57A - Instrument Microphone 50Hz to 16kHz
SKUD 112 MKIIC 451B STEREO PAIRD 40BETA57ABETA98H/CSM-57LCE
Rating
Price 211.00 incl. GR VAT 917.03 incl. GR VAT 101.00 incl. GR VAT 175.00 incl. GR VAT 241.91 incl. GR VAT 119.95 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Only 5 left in stock

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderOnly 5 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Cardioid Polar Pattern
  • Specialized for Bass Guitar/Drum
  • Response Maintained to 20 Hz
  • Very Low THD
  • Built-In Windscreen
  • Built-In Swivel Mount

The AKG D112 MKII Pro Dynamic Bass Microphone is a descendant of AKG\'s D112 and earlier D12 dynamic microphone, and is widely known for its ability to handle high-level signals from bass drums and bass guitars in the studio. The microphone has been designed with a low resonance frequency and can handle very high transient signals with low distortion. It has a large dynamic range with a high signal-to-noise ratio and the capacity to input high sound levels without distorting. High frequency response has been tailored to keep both bass drum and bass guitar clearly distinguishable in the mix. A built-in windscreen makes the D112 also suitable for high SPL instruments such as the trombone and tuba.

Cardioid-pattern microphoneBuilt-in swivel mountResponse tailored for bass guitar and bass drum pickup, both in the studio and on-stageResponse maintained down to 20 HzBuilt-in windscreen General Specifications Capsule Dynamic microphone capsule Polar Pattern Cardioid Audio frequency bandwidth 20 - 17000 Hz Max. SPL for 0.5 % THD > 160 dB (calculated) Electrical impedance 210 Ohms Recommended load impedance ≥ 2000 Ohms Sensitivity 1.8 mV/Pa (-55 dBV) Temperature Range -10 °C to +60 °C (14 °F - 140 °F) Dimensions Length 115 mm (4.53 in.) Height 126 mm (4.96 in.) Diameter 70 mm Net Weight mic only 300 g (10.6 oz.) Audio Output Type Balanced XLR Gender Male Contacts 3-pin Application Pro Studio Yes Project Studio Yes Live Instrument Yes Instrument Drums / Percussion Yes Guitar Amps / Bass Amps Yes

Precise artistic work deserves precise artistic craftsmanship. A classic by now, the CMS Series CK 1 capsule from AKG was a best seller from the moment it was launched in 1969. Comprising a range of interchangeable capsules and preamps as well as then innovative, dedicated accessories, the CMS Series from AKG quickly became a legend. It was discontinued in 1993. Responding to growing demand from recording engineers, AKG decided to produce the C 451 B with identical acoustical behaviour of the popular original C 451 EB + CK 1 microphone again, with dramatically improved specifications and outstanding price/ performance. The capsule of the new version is fixed permanently to the preamp to eliminate the mechanical problems of the screw joint. Using an extremely light diaphragm, the new C 451 B is almost totally insensitive to handling noise. An all-metal body provides excellent protection from RF interference and the microphone is rugged enough to give excellent results even under very harsh conditions.

The C 451 B is an excellent tool for accurately capturing signals rich in transients such as drums, overhead miking, or other instruments with a percussive sound. The airy sound, high overload limit of the capsule and electronic circuitry, and improved engineering details of the C 451 B are a solid foundation for creating another legend.

The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 200 Hz to 15,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.

Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.

The kit includes all the standard accessories of the individual package along with a stereo bar and proof of performance charts in an attractive carrying case (Soundtool case, middle size).

Features:

  • Identical acoustics of the legendary CK 1.
  • Rugged construction.
  • Ruler-flat on-axis frequency response.
  • Precise, nearly frequency independent cardioid.
  • Extremely accurate signal transfer.
  • Transformerless output stage for minimum distortion at low frequencies.
  • Protected against electrostatic and magnetic interference.
  • Selectable 10-dB and 20-dB preattenuation pads.
  • Switchable highpass filter (75 Hz or 150 Hz, 12dB/octave).
  • Operates on phantom power to DIN/IEC between 12 V and 48 V.
  • Complete with SA 40 stand adapter and W 90 windscreen.
  • Each microphone comes with its own individual frequency response plot.

Specifications:

  • Polar pattern: Cardioid
  • Frequency range: 20 to 20,000 Hz
  • Sensitivity: 9 mV/Pa (-41 dBV)
  • Max. SPL: 135/145/155 dB (0/-10/-20 dB) (k=0,5%)
  • Equivalent noise level (CCIR 468-3): 29 dB
  • Equivalent noise level: 18 dB-A
  • Signal/noise ratio (A-weighted): 76 dB
  • Preattenuation pad: 0 dB, 10 dB, 20 dB selectable
  • Bass filter: Flat, 12 dB/octave at 75 or 150 Hz, selectable
  • Impedance: 1000 ohms
  • Supply voltage: 9 to 52 V phantom power to DIN 45596
  • Current consumption:

The D 40 with its solid all-metal body will stand up to the hardships of night-after-night onstage use "with a smile“.
The Varimotion diaphragm deep-drawing process allows the diaphragm itself to be fine-tuned with no need for tuning resonators, leading to a quantum leap in audio performance.
The transducer is protected by a sturdy wire-mesh cap and takes extremely high sound pressure levels with ease.
An integrated stand adapter and standard H 440 mounting bracket for snare drums, tom-toms, etc. make the D 40 a highly versatile tool for use on drums, percussions, wind instruments, and guitar amps.

Musical instruments, Live applications.
Dynamic microphone designed for drums and percussions, wind instruments, and guitar amps
Patented AKG Varimotion diaphragm
Custom built capsule mounting
Spring steel wire-mesh cap
Rugged all-metal body withstands typical tough handling on stage

Type Cardioid
Polar pattern 75 to 20,000 Hz
Sensitivity 4 mV/Pa (-48 dBV)
Max. SPL 144/156 dB SPL (for 1%/3 % THD)
Equivalent noise level 18 dB-A
Impedance =1000 ohms
Connector 3-pin XLR
Finish dark stage blue
Dimensions length 104 mm (4.1 in.) height (incl. stand adapter): 79 mm (3.1 in.) max. dia.: 44 mm (1.7 in.)
Net weight 245 g (8.6 oz.)
 

Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence. The Beta 57A maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. A completely new grille design lets you take better advantage of proximity effect. The Beta 57A is an exceptionally versatile microphone. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.
  • Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
  • Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
  • Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse
  • Neodymium magnet for high signal-to-noise ratio output
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Frequency response: 50 to 16,000 Hz
Suggested Applications Guitar Amp Bass Amp Acoustic Guitar Brass/Saxophone Snare Drums Rack/Floor Toms Congas Woodwinds Lead Vocals

A high performance mini-condenser for sound reinforcement and recording. Great for instruments or drums. The ultra-uniform pickup pattern provides high gain before feedback and excellent rejection of unwanted noise.

Other features include:

  • Mew A98D flexible drum mount
  • SPL handling to 160dB
  • frequency response of 20 to 20,000Hz and included preamplifier
  • shock mount and windscreen
The Shure SM57 unidirectional dynamic microphone is exceptional for musical instrument pickup or for vocals. With its bright, clean sound and carefully contoured presence rise, the SM57 is ideal for live sound reinforcement and recording. It has an extremely effective cardioid pickup pattern which isolates the main sound source while minimizing background noise. In the studio, it is excellent for recording drums, guitar, and woodwinds. For musical instruments or vocals, the SM57 is a consistent choice of professional performers. It is also the standard microphone used on the podium of the U.S. President for over 30 years. Its outstanding performance, legendary reliability, and diversity of application make this "workhorse" the choice of performers, producers, and sound engineers the world over.
  • Contoured frequency response for clean, instrumental reproduction and rich vocal pickup
  • Professional-quality reproduction for drum, percussion, and instrument amplifier miking
  • Uniform cardioid pickup pattern isolates the main sound source while reducing background noise
  • Pneumatic shock-mount system cuts down handling noise
  • Extremely durable under the heaviest use
  • Frequency response: 40 to 15,000 Hz
Frequency Range 40 Hz to 15 kHz
Impedance 150 Ohms
Load Impedance 310 Ohms
Sensitivity 56 dBV/Pa (Open Circuit Voltage, 1 kHz)
Color Gray
Mounting 5/8"-27 Female, Mic Clip (Included)
Construction Material Steel, Steel Wire Grille
Dimensions ø: 1.26 x L: 6.18" / ø: 32 x L: 157 mm
Weight 10.02 oz / 284 g
 
Weight1.00 kg2.00 kg0.24 kg0.50 kg0.20 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 2.00 kg
Weight 0.24 kg
Weight 0.50 kg
Weight 0.20 kg
Weight 1.00 kg