Content |
MASS 10
Frequency Response 80Hz – 30kHz
Sensitivity 84dB
System Configuration 2- way Driver complement 1 x 4" C-CAM Bass/Mid-range Driver
1 x 25mm C-CAM® tweeter
with vented loading system
Nominal Impedance 8 ohms
Maximum SPL (each @1M) 104 dBA
Power Handling with amplifier 100 watts
crossover set to 100hz (RMS)
Power Handling (individual) 40 watts
Recommended Amplifier 25-100 watts
Requirements
Recommended High Pass 80-120Hz
Crossover Frequency
Bass Alignment Reflex Rear Ported
Overall Dimensions
(H x W x D) 224 x 128 x 128 mm 813/16 x 51/16 x 51/16 Inches Weight 1.65kg (3lb, 10oz)
|
Two way, bass-reflex
Woofer 130 mm. (5“)
Coated paper
Tweeter 28 mm.
Soft dome (silky fabric)
Impedance: 6 Ohm (min. 4)
RMS POWER: 80 W
MAX POWER: 120W
Efficiency: 89 dB/W/1m
Dimensions: 200x270 Weight: 7,5 Kg
Finishing:solid walnut
|
- Time Lens Technology-The acoustic centers of the tweeter and mid-bass driver are located in the same plane for superior imaging
- PowerPort® a patented Polk technology, extends the low frequency mid-bass driver response as it decreases air turbulence, and eliminates "port noise" and bass output losses up to 3 dB.
- 3/4" Silk Dome Tweeters for crisp, clear imaging and smooth response that's never tiring.
- 3 1/4" Composite Injection Molded Cones With Dynamic Balance Driver Technology
- Combination Keyhole Slot & 1/4" x 20 Threaded Insert fits all aftermarket ceiling and wall brackets for ultimate flexibility
- Time Lens Technology-The acoustic centers of the tweeter and mid-bass driver are located in the same plane for superior imaging
- PowerPort a patented Polk technology, extends the low frequency mid-bass driver response as it decreases air turbulence, eliminates "port noise" and bass output losses up to 3 dB.
- 3/4" Silk Dome Tweeters for crisp, clear imaging and smooth response that's never tiring.
- 3 1/4" Composite Injection Molded Cones With Dynamic Balance Driver Technology
- Combination Keyhole Slot & 1/4" x 20 Threaded Insert fits all aftermarket ceiling and wall brackets for ultimate flexibility.
Driver Complements
Mid/Woofer 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance composite cone driver
Tweeter 1 - 3/4" Diameter (1.91cm)
silk dome
Electrical
Overall Frequency Response 95Hz-24kHz
Lower -3dB Limit 125 Hz dB
Upper -3dB Limit 20kHz dB
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 89 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 7 1/8" H x 4 1/8" W x 5 3/16" D
(18.10cm H x 10.48cm W x 13.18cm D)
Mounting Options keyhole slot; .25 x 20 threaded insert
Enclosure Type Steel-plate reinforced curved enclosure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 3.00 lbs. (1.36kgs)
Shipping unit: each
Total Shipping Weight 3.70 lbs. (1.68kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
ΔΙΑΤΙΘΕΤΑΙ ΚΑΙ ΣΕ ΑΣΠΡΟ ΧΡΩΜΑ
|
# Perfect for use with 55-inch class and larger ultra-shallow TVs
# Only 1.5 inches (38mm) deep
# Wall mount bracket and table stand included
# Simply the best ultra slim on-wall speaker on the planet
# The dynamic punch, wide frequency range and broad dispersion of full size speakers
# Aircraft grade extruded Aluminum enclosure
# Anodized Aluminum dome XTDD drivers
# Pure Aluminum dome tweeter
Dimensions (mounted on wall without bracket) :32" H x 6" W x 1-1/2" D (81.5cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :32" H x 6" W x 1-9/16" D (81.5cm x 15.2cm x 40mm)
Dimensions (on table stand) :35" (89.1cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :4 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :70Hz - 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :30 - 200 Watts per channel
Enclosure :Extruded Aluminum, sealed
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black
|
Driver Complements Mid/Woofer 1 - 6 1/2" Diameter (16.51cm) Dynamic Balance driver with Super Cell Areated Polypropylene cone Midrange 1 - 3 1/4" Diameter (8.26cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone Tweeter 1 - 1" Diameter (2.54cm) Enhanced Ring Radiator Dynamic Balance tweeter Electrical Overall Frequency Response 36Hz-40kHz Lower -3dB Limit 50Hz dB Upper -3dB Limit 30kHz dB Nominal Impedance compatible with 8 ohm outputs ohms Recommended Amplifier Power 20-200 w/channel Efficiency 88 dB Crossover Orth Crossover Crossover (mid-high array) 2800HZ Inputs Dual Gold-Plated Binding Posts Dimensions Cabinet Size 16 3/4" H x 8" W x 14 9/16" D (42.55cm H x 20.32cm W x 36.99cm D) Mounting Options speaker stands or shelf mount Enclosure Type Sealed Enclosure Type (subwoofer) PowerPort bass venting Shipping/Other Product Weight 29.60 lbs. (13.43kgs) Shipping unit: each Total Shipping Weight 32.50 lbs. (14.74kgs) Speaker Warranty 5 years parts and labor (original purchaser) ALSO AVAILABLE IN "EBONY" COLOR
|
Dimensions (mounted on wall without bracket) :27" H x 6" W x 1-1/2" D (68.6cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :27" H x 6" W x 1-9/16" D (68.6cm x 15.2cm x 40mm)
Dimensions (on table stand) :30" H (76.2cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :92Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum
Product weight (without table stand) :5.1 lbs. (2.3kg)
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black |
Reviews
There are no reviews yet.