Monitor Audio PL100 PLATINUM SERIES Loudspeaker 1 x 6.5” RDT® Bass/mid-range driver -PAIR-

The PL100 is a truly compact, wideband speaker capable of expressing the entire micro-dynamic texture of every performance. A rigid cabinet construction, proprietary bracing techniques and advanced damping technologies combine to provide the optimum environment for its wonderfully accurate and detailed C-CAM ribbon tweeter and its lightening-fast, precision-engineered RDT bass driver. The PL100 will draw a rich, natural radiance from the most demanding of music and film scores and reproduce the power and scale of dramatic passages with a breathtaking fidelity

1 x 6.5” RDT® Bass/mid-range driver
1 x C-CAM® high frequency ribbon transducer
Ported. HiVe® II technology
All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather.
Finish options: Santos Rosewood veneer with clear gloss piano lacquer
Ebony veneer with clear gloss piano lacquer
Piano black gloss
Optional dedicated floor stands are available

Frequency Response: 42 Hz - 100 KHz
Sensitivity (1W@1M): 88 dB
Nominal Impedance:
4 Ohms
Maximum S.P.L
(Per pair in room): 112.6 dBA
Power Handling (RMS): 120 W
Recommended Amplifier Requirements (RMS): 50 - 120 W
Bass Alignment: Ported
HiVe II Technology
Mid / H.F Crossover Frequency: 2800 Hz
Bass Low Pass Crossover Frequency: N/A
Drive Unit Compliment: 1 x 6.5" RDT Bass/mid-range driver
1 x C-CAM high frequency ribbon transducer
External Dimensions -
Excluding Stand (H x W x D): 370 x 225 x 285 mm
(14 9/16 x 8 7/8 x 11 1/4 inch)
Stand External Dimensions -
(H x W x D): 615 x 340 x 365 mm
(24 3/16 x 13 3/8 x 14 3/8 inch)
Weight (each) Excluding stands: 13 Kg (28.6lbs)

User's Manual

AVAILABLE IN THESE COLOR FINISHES

# Perfect for use with ultra-shallow TVs 40-inch class and larger
# Only 1.5 inches (38mm) deep
# Wall mount bracket included
# The dynamic punch, wide frequency range and broad dispersion of full size speakers
# Aircraft grade extruded Aluminum enclosure
# Anodized Aluminum dome XTDD drivers
# Pure Aluminum dome tweeter

Dimensions (mounted on wall without bracket) :23-1/4" H x 6" W x 1-1/2" D (59.1cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :23-1/4" H x 6" W x 1-9/16" D (59.1cm x 15.2cm x 40mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 2 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :100Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum, sealed
Supplied accessories :Wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black

Frequency Response +/- 3dB:    60 Hz - 35 KHz
Sensitivity (1W@1M):    87 dB
Driver Compliment:    1 x 140mm (5 1/2“) RST® mid-bass driver
1 x 25mm (1“) C-CAM® gold dome tweeter
Nominal Impedance:    8 ohms
Maximum SPL (each):    110.8 dBA
Recommended Amplifier Requirements (RMS):    25 - 100W
Bass Alignment:    Front ported - bass reflex. HiVE®II port system
Power Handling (RMS):    100W
Crossover Frequency:    3.0kHz
External Dimensions:
(H x W x D)    250 x 140 x 140 mm
9 13/16 x 5 1/2 x 5 1/2 inch
Weight (Individual):    3.95 kg (8 3/4 lbs)

 User's Manual

 ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ

Driver Complements
Mid/Woofer     1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response     90Hz-31KHz
Lower -3dB Limit     115Hz
Upper -3dB Limit     28KHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     88 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Cabinet Size     7 3/4" H x 4 1/2" W x 5 15/16" D
(19.68cm H x 11.43cm W x 15.08cm D)
Mounting Options     Included wall mount bracket; 1/4x20 threated insert
Enclosure Type     Steel-plate reinforced curved enclosure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight     3.00 lbs. (1.36kgs)
Shipping unit:     each
Total Shipping Weight     3.70 lbs. (1.68kgs)
Speaker Warranty     5 years parts and labor (original purchaser)
Accessories (comes with)     included wall mount bracket



ALSO AVAILABLE IS WHITE COLOR

System Format:    2 Way
Frequency Response:    42 Hz - 60 kHz
Sensitivity (1W@1M):    88 dB
Nominal Impedance:    8 ohms
Maximum S.P.L
(Per pair in room):    112.6 dBA
Power Handling (RMS):    120 W
Recommended Amplifier Requirements (RMS):    60 - 120 W
Bass Alignment:    Bass reflex. HiVe port system
Crossover Frequency:    2.7 kHz
Drive Unit Compliment:    1 x 6.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

362 x 210 x 303 mm
(14 3/8 x 8 1/4 x 11 15/16 inch)
Weight (each) Excluding stands:    9.9 Kg (21.75 lbs)

The M-1 has been engineered with the same design attributes and ethos as B&Wʼs larger ranges. Perhaps the most striking thing about the M-1 is the weight and strength of its curved aluminium cabinet. This is combined with a strong, glass-loaded ABS front baffle. Together they provide an excellent cabinet: the curved aluminium is stiff and the ABS offers excellent and appropriate damping characteristics.

The M-1ʼs drive units were developed by Bowers & Wilkins specifically for the design. The metal dome tweeter benefits from refinements developed for the new B&W 800 Series and includes Nautilus™ tube loading and neodymium magnets. The glass fibre bass/midrange coneʼs ability to absorb standing waves has been further enhanced by the inclusion of five strategically placed resin filled slots that further minimise distortion.

The result of this detailed cabinet and drive unit engineering has allowed B&Wʼs engineers to borrow another feature from the new 800 Series and utilise the simplest of electronic equalisation in the M-1ʼs crossover. Each of the drive units is fed by only a single, carefully selected component. This approach to crossover design, although painstaking as it relies on optimising all of the physical components in a design, is crucial in achieving its aim of neither adding to nor subtracting from the original signal.

The M-1 is available in three colour options - black, white and silver, each with chromium plated stem and table base.