Content |
Product details
Woofer: | 10-inch black Glass-Composite Cone | Frequency response: | 20Hz - 200Hz | Crossover frequency: | 50Hz - 130Hz adjustable | Amplifier Power: | 300W | S/N Ratio (A weighted): | >95dB | THD + N @ Rated Power: | 0.08% | Inputs: | 2x XLR, 2x TRS, 2x RCA Connectors | Outputs: | 2x XLR, 2x TRS, 1x XLR balanced (Sub out) Connectors | Input Impedance: | 20 kOhm balanced, 10 kOhm unbalanced | Phase reverse: | 0 / 180° switch | Ground Lift switch: | On / Off | Bypass Footswitch: | On / Off | Available colors: | Red, Black | Net weight: | 17.6kg / 38.7lb | Net Dimensions: | L385 x W340 x H390 mm
L15.16 x W13.39 x H15.35 in |
|
Genelec 7270A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to an entirely new level. This powerful and precise low frequency monitoring solution is designed for modern 6.1 or 5.1 multi-channel systems as well as traditional stereo applications.
With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile digital bass management system, the 7270A adapts to all low frequency monitoring situations.The amplifier unit is integrated into the enclosure containing active DSP crossover filters, driver overload protection circuits and power amplifiers.
The built-in bass management system supports eight input and output channels (four XLR connectors) for AES/EBU formatted digital audio.
The main channels crossover frequency can be adjusted between 50-100 Hz. The LFE channel input (input 4) features an adjustable 50 - 120 Hz low-pass filter and a 0/+10 dB sensitivity switch.
The Genelec Loudspeaker Manager (GLMTM) control network and software enhances further the performance of the 7270A: it features adjustment of levels, distance delays, phase and flexible room response improvement equalization with the reliable and robust AutoCalTM automated calibration system via the GLMTM control network.
The Genelec Laminar Spiral EnclosureTM (LSETM) bass reflex enclosure is made of sheet metal rolled into a spiral shape and clamped between sturdy MDF side panels.
This novel construction technique allows for a long reflex tube to be mounted into a small cabinet, which provides as a result excellent laminar flow characteristics with minimal turbulence noise.
| 112 dB | | Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 12“ | | 250 W | | H x W x D 625 x 555 x 490 mm | | 51 Kg (112 lb) | | 4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU) |
| To hear what's really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The TemblorTM T10 lets you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.
Main components - 10-inch glass-composite low-frequency transducer
- Front-firing, bass-reflex acoustic port
Controls and filters - Input gain control (-30 dB to +6 dB, continuously variable)
- Continuously variable lowpass filter (50 Hz to 130 Hz)
- Built-in crossover
- Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the T10 outputs to the main monitors
- Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
- Polarity invert and ground-lift switch
Power and safety - 250 watt, Class AB amplification
- Internal damping and heat sink
- Integrated, gravity-calibrated rubber feet for stable placement
Inputs and outputs - Left and right, balanced XLR and ¼" TRS and unbalanced RCA main inputs
- Left and right balanced XLR and ¼" TRS outputs
- XLR subwoofer output for connecting a second T10
Inputs |
| 2- Balanced XLR |
| 2- Balanced ¼" TRS |
| 2- Unbalanced RCA | | | Outputs |
| 2- Balanced XLR (full range with 80 Hz HPF option) |
| 2- Balanced ¼" TRS (full range with 80 Hz HPF option) |
| 1- Balanced XLR (Sub Out) | Performance | Frequency Response | 20 Hz - 200 Hz | Low Pass Filter Frequency | 50 - 130 Hz (variable) | Signal-to-Noise Ratio | >98 dB | THD | 0.019% @ power | |
The Genelec 7073A active subwoofer is a powerful and precise bass reproduction tool for large Surround Sound or Stereo installations. Its 19 Hz lower cut-off frequency and 124 dB sound pressure output capability are sufficient to handle the most demanding high SPL applications.
All electronics are integrated into the subwoofer cabinet: active crossover filters, driver overload protection circuits and power amplifiers.
The built-in bass management unit has six signal input and output channels (L/C/R Front and L/C/R Rear), LFE input and summed signal output connectors, providing great flexibility and easy connection.
| 124 dB | | Main 19 - 85 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 4 x 12“ | | 1000 W | | H x W x D 524 x 1440 x 558 mm | | 120 Kg (265 lb) | | 6.1 XLR analog in
6 x XLR analog out
1 x XLR Link out |
|
The Sub6 is a large volume cabinet design, equipped with an 11" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL. The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE. The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.
Specifications Frequency response : | 30Hz - 250Hz | Maximum SPL : | 116dB SPL (peak @ 1m) |
Input :
|
Right, left, LFE
Electronically balanced, 10 kOhms
XLR 3 points socket
Adjustable
| Outputs (towards speakers) : | Type/Impedance: Electronically balanced / 50 Ohms - Connector: XLR 3 points plug |
Amplification :
|
350W rms, BASH® technology
|
Signal internal treatment :
|
Subwoofer section: Mono right/left summation
LFE + mono low-pass
24dB/octave
Phase adjustment
Polarity selection switch
Switch high-pass filter, cut-off frequency selection
Speaker section : 24 dB / octave
|
Electric supply :
|
Local supply wire: 230V (1.6A fuse)
or 115V (3.5A fuse)
Connection: removable IEC supply wire
|
Visualization and control :
|
Adjustable subwoofer level
Low-pass cut-off frequency setting
Phase adjustment
Polarity adjustment
Subwoofer switch (mute)
2.1 "Bypass" (external remote contol)
High-pass frequency selection
Releasable high-pass
| warning light : | Power on LED, Subwoofer switch (mute), Released high-pass |
Electric supply :
|
Local supply wire: 230V (1.6A fuse)
or 115V (3.5A fuse)
Connection: removable IEC supply wire
| Subwoofer : | 11W7670, 10-5/8" (27cm) Focal "W" composite sandwich cone driver | Box : | 7-1/2" (19mm) MDF panels |
Finish :
|
Dark red natural veneering side panels, black body.
| Dimensions (HxWxD) : | 14-15/16 x 13-9/16 x 17-5/16 " (380 x 344 x 440mm) | Weight : | 50.7lb (23kg) |
|
The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.
GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.
|
Reviews
There are no reviews yet.