| Content |
- Three Reverb Modes: Room, Spring, Shimmer
- Room: Different sized true acoustics reverb, from room to hall.
- Spring: Simulates a classic spring reverberation, vintage 60ʼs Surfing sound.
- Shimmer: Adds rich overtone into the reverb sound, spacy, smooth and shining, very popular in Post Rock music.
- Full metal shell
- Very small and exquisite
- True bypass
- Requires DC 9V Adapter power supply
Application:
|
Εl.Guitar |
| Type: |
Single |
| Effect: |
Reverb |
|
The MD-2 Mega distortion takes the bottom-heavy distortion sounds heard in today's new-school metal and pushes it to the extreme. The secret is a special dual-stage distortion circuit with an added gain boost-plus new Bottom and Tone controls--for crushing distortion with massive low end. Take your distortion into the future with the MD-2.
- Produces extreme, low-end distortion for modern metal and hard rock
- Gain Boost circuit creates huge distortion and sustain regardless of level
- New Bottom control for bottom-heavy distortion matched to 6- or 7-string guitars
- Tone control adjusts balance between high and low frequencies
- BOSS 5-year warranty
| The FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure retro. Looking back at the glorious rock sounds of the ʼ60s and ʼ70s, the FZ-5 recreates its vintage fuzz through BOSS state-of-the-art COSM technology. Recall the fuzz-filled flavors of classic pedals such as the Maestro FZ-1A, Fuzz Face, and Octavia pedals, and kick ʼem into overdrive with the FZ-5ʼs Boost knob. BOSS' proprietary COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.
- Vintage sounds inspired by famous fuzz pedals of the ʼ60s and ʼ70s
- Uses advanced COSM technology to recreate classic fuzz
- BOOST control for more aggressive tone
- Road-tough BOSS metal construction
| Nominal Input Level |
-20 dBu |
| Input Impedance |
1 M ohm |
| Nominal Output Level |
-20 dBu |
| Output Impedance |
1 k ohm |
| Recommended Load Impedance |
10 k ohms or greater |
| Controls |
Pedal switch, LEVEL knob, FUZZ knob, MODE knob |
| Indicator |
CHECK indicator (Serves also as battery check indicator) |
| Connectors |
INPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V) |
| Power Supply |
DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional) |
| Current Draw |
36 mA (DC 9 V) |
| Expected battery life under continuous use |
Carbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use. |
| Accessories |
Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), MODE sticker, Dry Battery 006P/9V (6LR61) |
| Options |
AC Adaptor (PSA series) |
| Size and Weight |
| Width |
|
| Depth |
|
| Height |
|
| Weight |
|
|
Bass chorus like the world has never known.
The DigiTech XBC Bass Multi Chorus Pedal is designed especially for bass. The XBC Bass Chorus Pedal lets you morph up to 16 bass chorus voices at once for an endless palette of amazingly rich effects. Built-in voice randomization increases with more voices for an even denser wash of killer chorus. DigiTech includes a 9V battery with the XBC Bass Multi Chorus Pedal.
DigiTech XBC Bass Multi Chorus Pedal Features:
- Designed especially for bass
- Morph up to 16 bass chorus voices at once
- Voice randomization increases with more voices
| The Marshall EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay. Add dense rhythmic textures to your sound.
The Marshall EH-1 ECHOHEAD recreates six different delay effects for you to explore, from crystal-clear echoes to hypnotic reverse delays via the vintage whir of a retro tape machine. Create pulsing tones from your guitar rig and add dense rhythmic textures to your sound. The EH-1 Echohead features a maximum delay time of 2000ms, stereo outputs and a tap tempo delay imput. The EH1 Echohead dual outputs offer the choice of using a passive bypass for the main signal path to ensure complete tonal integrity or to allow your pedal to spill over, permitting your echo to naturally die away.
The main features of the Marshall EH-1 ECHOHEAD include:
- 6 different, high quality delay effects for you to explore
- Multi-mode selector switch
- Delay time control
- Feedback control
- Level control
- Solid metal casing
- Passive bypass
- Tap tempo pedal input
- Power: 9V DC Centre Negative Regulated PSU or PP3 battery
- Minimum Current Draw: 80mA
- Switches: On/Off Switch
- Indicators: On/Off LED
- Jacks: 2 Input, 2 Output 'Jack sockets' (1/4 inch)
- Input Impedance: 1MOhm
- Output Load Impedance: less than 1kOhm
- Dimensions: 120mm x 65mm x 55mm
- Weight: 510 grammes
| Features twin modes for an expanded range of distortion—taking you from blues-rock rhythms to searing leads at the press of a pedal or twist of a knob.
The SD-1 Super OverDrive pedal produces the warm, natural distortion of an overdriven tube amplifier while maintaining the subtle nuances of a player's picking technique. This is one of BOSS' more subtle and smooth overdrive pedals, perfect for blues and rock.
- Compact overdrive pedal with warm, smooth overdriven sounds
- Unique asymmetric overdrive circuitry for a classic, natural tube amp growl
- Tone control provides precise adjustment of drive sound
- BOSS 5-year warranty
| Input Impedance |
1 M ohms |
| Output Impedance |
10 k ohms or greater |
| Equivalent Input Noise Level |
–120 dBu or less (IHF-A, Typ.) |
| Connectors |
INPUT Jack, OUTPUT Jack, REMOTE Jack, AC Adaptor Jack |
| Power Supply |
DC 9 V: Dry Battery 9 V type, AC Adaptor |
| Current Draw |
12 mA (DC 9 V) |
| Accessories |
Dry Battery 9 V type (6F22/9 V) |
| Option |
AC Adaptor (PSA-Series) |
| Size and Weight ( incl. battery ) |
| Width |
|
| Depth |
|
| Height |
|
| Weight |
|
|
Reviews
There are no reviews yet.