Content |
With one simple plug-and-play FireWire connection, the V4HD turns your Mac or PC desktop or laptop computer into a powerful HD/SD video production workstation equipped with all the video and audio I/O you need. Connect all your gear, from SD camcorders and monitors to today's latest professional HD cameras, video decks, LCD reference monitors and plasmas – all at the same time, with no cable swapping. Choose your input source, then log and capture HD or SD clips directly into Final Cut Pro or Premiere Pro. In Final Cut Pro, the V4HD supports full-raster 1920x1080 HD capture and playback using Apple's ProRes 422 codec in both standard and HQ modes. The V4HD is the ideal all-in-one video capture solution for any ProRes workflow. In both Final Cut Pro and Premiere Pro, the V4HD provides hardware-accelerated capture and playback of DVCProHD, DVCPro50 and DVCPro25 video streams, plus 8- and 10-bit uncompressed SD — all with convenient plug-and-play FireWire connectivity and CPU-efficient intra-frame editing. The V4HD is ideal for a DVCProHD/P2 workflow because you can immediately play back P2 clips (either imported or ingested) with no transcoding necessary. Conversely, you can connect any SD or HD video source such as an HDV camera, legacy video deck or DVD player and then capture it directly as a DVCProHD clip in Final Cut or Premiere. Many cameras now feed their uncompressed SDI or component output directly from the camera's optics and imager, before compression, for the best-possible picture quality during capture with the V4HD. Need to bring SD material into your HD project? The V4HD even provides hardware-accelerated SD-to-HD up conversion for capturing SD sources in DVCProHD format. As you edit, monitor your timeline on multiple HD and SD displays simultaneously with the V4HD's hardware-accelerated up-conversion, down-conversion and pull-down insertion or removal. Watch a variety of display formats side by side, from the pixel-for-pixel accuracy of a large plasma screen, to the color-corrected balance of an LCD reference monitor, to the real-world look of a consumer display. Use 32 channels of audio I/O to capture, monitor, mix and master multichannel surround sound for your productions at sample rates up to 192 kHz. Employ Sony 9-pin machine control for advanced Batch Capture and Edit to Tape operations. Keep everything frame-accurate using time code, video reference and audio word clock. The V4HD delivers all this with one simple FireWire 400 or 800 connection — even to a laptop computer. With the V4HD handling video I/O via FireWire, your laptop's expansion slot can be used for high-performance video storage solutions. From start to finish, the V4HD streamlines your video production workflow, with unified control over all your video gear from your computer desktop. System Requirements for the V4HD The V4HD has the following system requirements. For all systems: - 1 GB of RAM; 2 GB or more recommended
- Available FireWire 400 or 800 port
- Available USB port (for firmware updates)
- Large hard disk drive (preferably at least 500 GB)
- CD-ROM disc drive for installation
For Mac OS X: - PowerPC G5 CPU or faster; Intel CPU and multiple CPUs or multiple-core CPU highly recommended. An Intel CPU is required for ProRes support.
- Mac OS X version 10.4, 10.5, or 10.6; version 10.4.9 or later is required
- For use with Final Cut Pro 5.1 or later; Final Cut Pro 6.0 or later is required for ProRes. Final Cut Pro 7.0 or later is recommended under Mac OS X v10.6.
For Windows: 32-bit - Pentium 4 CPU 1 GHz or faster; multiple processors or multiple cores highly recommended
- 32-bit operating system: Windows 7, Vista, or XP Professional SP3
- For use with Premiere Pro CS3 version 3.1 or later; CS4 support requires version 4.0.1 or later
64-bit - Intel Core 2 Duo or AMD Phenom II processor
- 64-bit operating system: Windows 7, Vista, or XP
- For use with Premiere Pro CS4 version 4.2.1 or later; CS5 support requires Windows 7 or Windows Vista
Supported NVIDIA graphics cards for GPU acceleration - Quadro FX line (3800, 4800 and 5800)
- GeFore GTX series (285 and 470)
|
The YIT-W10 is a wireless transmitter designed for iPhone or iPod products. It employs the Yamaha "yAired” technology to establish a wireless connection with another Yamaha product that supports "yAired” and enables playback of the iPod or iPhone on your Yamaha product. Also the charging cradle can be used for charging the iPod or iPhone, or to play music or movies for an extended time.
This product is included with the YSP-5100 and YSP-4100 Yamaha Digital Sound Projectors.
Dimensions (W x H x D) 1-3/4" x 7/8" x 3-1/4“(DX-50TX); 2-1/4" x 3/4" x 2-7/8“(PDX-50BC)
Weight 1.02 oz (DX-50TX); 1.04 oz(PDX-50BC)
|
Meet Quartet
The ultimate desktop audio interface and control center for iPad and Mac
Apogee Quartet is a professional USB audio interface designed to deliver the ultimate desktop recording experience to the iPad and Mac-based studio. Featuring 4 inputs and 8 outputs of Apogee\'s industry-leading AD/DA conversion technology as well as 4 world-class mic preamps, Quartet bridges the gap between the 2-channel Apogee Duet and Apogee\'s flagship interface, Symphony I/O.
Quartet for iPad and Mac features special circuitry designed to deliver professional performance for iPad use along with low latency USB 2.0 performance for Mac. Quartet\'s MIDI I/O connector lets you connect and power a Core MIDI compatible keyboard/controller while using Duet with your iPad or iOS device.
Legendary Sound Quality
Why Apogee Quartet is the best choice for your studio
Apogee is an award-winning industry leader in digital recording technology with over 25 years of experience. Preferred by recording pros around the world, Apogee products like Duet, Ensemble and Symphony I/O have been instrumental in creating countless GRAMMY® and OSCAR® winning recordings and have set the industry standard in professional recording for over two decades. Quartet is built solidly on this reputation.
Highlights
- First professional multi-channel audio interface for iPad
- Direct digital connection to iPod touch, iPhone, iPad
- Works with new iPhone 5, iPad (4th generation), iPad mini
(Apple\'s Lighting to 30-pin adapter required - Sold separately)
- Works with GarageBand, Auria, MultiTrack and any Core Audio compliant app on iOS
- Works with GarageBand, Logic, Pro Tools, Ableton and any Core Audio compliant app on Mac
- Low latency monitoring, complete input/output control with Apogee\'s Maestro software (iOS & Mac)
- MIDI input/output (USB-A type connector)
- DC power supplies charge to iPod touch, iPhone or iPad
- USB 2.0 audio with 24-bit/192kHz A/D and D/A conversion
- 4 Analog inputs with world-class mic preamps and selectable 48v phantom power
- ADAT/SMUX digital Inputs
- Monitor control - up to 3 speaker sets
- 1 Independent 1/4" stereo headphone output
- QuickTouch pads for input/output selection and advanced control
- Legendary Apogee sound quality
- Designed in California - Made in the U.S.A.
Specifications
System Requirements:
Mac OS:
- Computer: Intel Mac 1.5GHz or faster
- Memory: 2 GB RAM minimum, 4 GB recommended
- OS: 10.6.8, 10.7.4 or greater
- Connection and power: Any available USB port on a Mac
- Power: DC Power supply included
iOS:
- iOS version: 5.1.1 and later
- Connection: 30-pin dock connector
- DC Power supply included
iOS device compatibility (Lightning connector)
* Requires Apple\'s Lightning to 30-pin adapter. Sold separately.
iOS device compatibility (30-pin connector)
Compatible Software:
- Mac
- Any Mac Core Audio compatible application
- Recommended apps: Logic, GarageBand, MainStage, Final Cut, Pro Tools, Ableton Live, Digital Performer, Studio One, Cubase, and Nuendo
- iOS
- Any iOS Core Audio compatible app. Recommended apps: GarageBand, Auria
Features:
- USB 2.0 High-speed Mac audio interface
- 4 Analog Inputs:
- Combination line (balanced +20dBu max)
- Mic/Instrument (+20dBu/+14dBu max)
- 4 Microphone preamps with up to 75dB of gain
- Selectable 48v phantom power, Soft Limit and phase invert
- Digital Inputs:
- ADAT/SMUX Input, 8 channels, 2 Toslink connectors, 44.1kHz to 96kHz
- MIDI input (USB-A type connector)
- 8 Analog Outputs:
- 6 Balanced line outputs, +20 dBu maximum output level
- 1 Independent 1/4" stereo headphone output
- Digital Outputs:
- MIDI output (USB-A type connector)
- Word clock output on BNC connector
- A/D and D/A conversion: 24 bit/192kHz
- 2 top panel high-resolution OLED displays
- Controller knob
- 6 touchpads for direct selection of inputs and outputs
- 3 assignable touchpads to control:
- Mute Outputs
- Dim Outputs
- Sum to Mono
- Clear Meters
- Engage Speaker Set (allows monitoring of up to 3 pairs of speakers)
Mic Pre:
- EIN: 128dB (un-weighted) @ 60dB, 150Ohm input
- Max input level: +20dBu
- Input impedance: 3KOhm
Hi-Z:
- Max input level 14 dBu
- Input impedance: >2MOhm
A/D conversion:
- Max input level (+4dBu ref): +20dBu
- Max input level (-10dBV ref): +6dBV
- Input impedance: 5KOhm
- Freq resp 20 Hz -20Khz: > +/-0.2dB (@44.1Khz)
- Rel. THD + N: -106dB (@ 96Khz)
- Dyn. Range: 114dB (A-weighted)
D/A conversion:
- Max output level (+4dBu ref): +20dBu
- Max output level (-10dBV ref): +6dBV
- Line output impedance: 90 Ohm
- Max output level headphones: 19dBu
- HPH output impedance 30 Ohm.
- Freq resp 20Hz -20 Khz: > +/- 0.05dB (@44.1Khz)
- Rel. THD+N : -113dB (@96Khz)
- Dyn Range: 123dB (A-weighted)
In the box:
- Quartet
- 2 meter USB Cable
- Universal Power Supply with standard 3 pin-IEC cable
- QuickStart Guide
- Instructions for download of software and complete documentation
|
Create stunning podcasts and voice recordings quickly and easily
iRig MIC Cast is the ultra-compact, portable voice recording microphone designed specifically for recording podcasts, interviews, lectures, voice memos, speeches and more.
iRig MIC Cast provides a pocket-sized voice recording solution with crystal-clear audio quality. It features a tight unidirectional pickup pattern that minimizes background noise, making it ideal for single-source audio recording.
This makes iRig MIC Cast also great for business applications like recording meetings and enhancing the audio and voice quality of conference calls.
iRig MIC Cast is proof that great things come in small packages. In addition to an incredibly flat frequency response with zero tonal coloration, the iRig MIC Cast...
Features: - Features a stereo mini-jack headphone output enabling real-time monitoring of what is being recorded using headphones or speakers.
- Offers a mini-switch that provides two different sensitivity settings to record close-up or distant sources.
- Includes an adjustable desktop stand for convenient iPhone/iPod touch positioning during recording.
- Has a bumper-friendly mini-jack connector that fits the majority of iPhone/iPod touch cases.
- Has an ultra-compact profile that can be carried anywhere with ease.
- Like other IK Multimedia microphones, it includes 2 free apps: iRig Recorder, an easy-to-use voice recording/editing app, and VocaLive, a multi-effects processing app for singers.
- Works with all regular phone calls and any Voice-Over-IP app.
- Is compatible with iPhone/iPod touch/iPad.
Specs iRig MIC Cast Specifications - Microphone Type: condenser electret
- Polar Pattern: unidirectional/cardioid
- Frequency Response: 100 Hz - 15 kHz, -3dB
- Maximum Sound Pressure: 110 dB
- Distortion: 3% THD at 110 dB, 1 kHz
- Windscreen: built-in
Package includes | Dimensions | - iRig MIC Cast ultra-compact audio capture microphone
- Portable table-top stand for iPhone/iPod touch
- iRig MIC Cast Instruction Manual
| - Size: 30mm/1.18" x 47mm/1.85" x 10mm/0.39" (W x L x H)
- Weight: ~15g/0.52oz
| Requirements iOS Devices
iRig MIC Cast is compatible with iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS, iPod touch (5th, 4th and 3rd generation), iPad 4th generation, iPad 3rd generation, iPad 2, iPad and iPad mini. iOS 4.3 or later is required.
Android Devices
Works with most Android devices including: Google Nexus S, HTC Desire HD, Samsung Galaxy S III, Samsung Galaxy S II, Samsung Galaxy W, Samsung Galaxy S, Samsung Galaxy Note, Samsung Galaxy Nexus, Samsung Galaxy Tab 10.1, Samsung Galaxy Tab 7 plus.
Computers
Mac®: Most Mac computers starting from late 2008 are compatible with the exception of the Mac Pro line.
To check if your Mac is compatible select: About This Mac > More Info > System Report > Audio
and check that "External Microphone / iPhone headset" is appearing on the list of included features.
|
The DigiTech iStomp is an entirely new concept in pedals. It works just like a traditional stompbox with one huge exception. It can be completely reconfigured by loading it with any of the 47 (and growing) e-pedals available in the Stomp Shop app.
Unlike devices that require you to stay tethered to your iOS device, the iStomp does all of its processing internally. This means professional-quality, high-definition signal processing with no latency and you don't need your iOS device while you're playing.
- Load any e-pedal to your iStomp from the Stomp Shop e-pedal store and virtual road case.
- Stomp Shop offers 47 different e-pedals to choose from
- More e-pedals are being added to the Stomp Shop each month
- User defined custom LED color for any e-pedal loaded to the iStomp
- Die-cut removable custom labels for multiple e-pedals included with your iStomp
- True stereo in and stereo out
- Stomp Shop Apps saves all your e-pedals in the app to become your virtual road case
- Compatible with all models of iPod touch, iPhone, and iPad running iOS 4.3 or later
Input Connectors | 1/4" Stereo | Output Connectors | 1/4" Stereo | Power Connector | 9VDC | Input Impedance | 500 kOhm (mono), 1 MOhm (stereo) | Output Impedance | 100 Ohms | Frequency Response | 20 Hz - 20 kHz +/- 1.7 dB (through DSP) | Power Consumption | 150 mA @ 9 VDC | Power Supply | PS0913DC-01 (US, JA, EU), PS0913DC-02 (AU, UK) | Controls | On/Off Footswitch, 4 Control Knobs | Dimensions | 4.9" (L) x 3.15" (W) x 1.65" (H) | Unit Weight | 0.6 lbs. | Data Connection | DigiTech Smart Cable (DSC) 9 Pin |
|
TASCAMʼs iU2 is a premium sound quality audio interface for the iPad, iPhone and iPod Touch. It includes all of the features of TASCAMʼs best-selling USB audio interfaces, including a pair of great-sounding microphone inputs. The XLR inputs have phantom power for use with high-quality condenser microphones. These feed an onboard microphone preamp and A/D converter for better sound performance than those built into iPhone and iPad – true stereo recording with low noise and less tendency to distort. The inputs also accept line-level signals or you can plug a guitar or bass directly into your device. In addition to compatibility with iOS devices, the iU2 also works with Mac and Windows computers. A zero-latency monitoring path allows musicians to hear themselves directly through the unit, without any distracting delay. MIDI in and out are provided to interface with synths and drum machines, and a digital output connects to digital mixers or recorders.
When youʼre ready to get serious with iPad music recording, step up to the pro-quality interface of TASCAMʼs iU2.
Audio/MIDI Interface for Mac, Windows and iOS devices Compatible with iPhone, iPad and iPod Touch Two XLR mic inputs with phantom power Two balanced line inputs Instrument-level input for guitar or bass MIDI in and out Onboard A/D conversion for low-noise and distortion when recording with iOS devices Zero-latency direct monitoring S/PDIF Digital Output Includes USB cable, iOS dock connection cable, XLR to ¼” conversion cables
User\'s Manual |
Reviews
There are no reviews yet.