| Content |
Flush mounting frame for permanent installation of the AKG conference microphone units |
Infrared radiators providing wireless transmission of up to seven language channels for persons (e.g., observers) listing to a conference without asking for the floor.
The infrared radiators shall connected to the CS 5 BU through 2 BNC connectors and 50 Ohm coaxial cabling and serial concatenation. It shall transmit a PPM system modulated time-multiplex outputs of the central unit shall drive an arbitrary number of radiators. The CS 5 IRT1 shall have a radiation angle of +/- 22° and a working distance of 300 meters (with 50% down). The CS 5 IRT2 shall have a radiation angle of +/- 22° and a working distance of 500 meters (with 50% down).
As accessories of the infrared radiators the holding frame needed for mounting it to the side wall or the ceiling shall be included. The transmitter shall have a built in switchable power supply with IEC connector.
|
- System Features and Outline
- Operations such as giving speech permission can be done from the operation PC. *Custom design.
- The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
- All speeches during the conference can be recorded clearly.
- Sub audio(Japanese interpretation) is not recorded.
- Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized on the Central unit.
- Speeches can be addressed to audience via sound amplification. * The sub audio output is not amplified
SPECIFICATION:
| Power Source | 100-240 V AC, 50/60Hz (supplied from AC adapter (accessory)) | | Power Consumption | 72W | | Input | MIC: -60 dB*, 600O,unbalanced, phone jackAUX: -20 dB*, 10 kO,unbalanced, phone jack | | Output | REC: -20 dB＊, 10 kΩ, unbalanced, phone jack, RCA pin jack HEADPHONE: Mini jack | | Number of Connectable Chairman/Delegate Units | 64 units | | Number of Connectable Infrared Transmitter/Receiver Units | 4 units (up to 16 units by using four Distributors) | | Infrared Transmitter/Receiver I/O Terminal | 4 BNC jacks | | External Control Terminal | D-sub connector (9 P, male) | | LED Indicator | Audio signal receiving indicators 1-4 CH,Data signal receiving indicator, External control priority indicator, External control communication indicator, Power indicator, Battery indicator (flashes when a Chairman/Delegate unit's battery nears complete discharge) | | Function Switch | Simultaneous speaker No. setting switch: 1/2/4 Mic-off setting switch: TIME OUT ON/OFF
Speech priority selector switch: A/B/C (A: First-in-first-out priority, B: Last-in-first-out priority, C: Fixed for the first unit, and last-in-first-out for the subsequent units) | | Operating Temperature | 0º to＋40º | | Finish | Panel: Surface-treated steel plate, gray metallic, paint, semi-gloss | | Weight | 2.7kg | | Accessory | AC adapter (Cord length: 1.8 m DC cord, and 2 m detachable AC cord)…1 | | Option | Rack mounting bracket: MB-TS900 | | | ＊0dB=1V |
|
|
|
| - DOT MATRIX DESIGNED VFD DISPLAY
- USB RECORDING(USING USB MEMORY STICK MP3 FILE)
- HIGH FIDELITY 60W MONO CHANNEL AMPLIFIER
- BUILT-IN MONITOR SPREAKER WITH CONTROL VOLUME
- 3 BAND EQUALIZER
- EXTRA MICROPHONE JACK WITH VOLUME
- AUX INPUT AUX OUT LINE INPUT LINE OUT
- CONNECTING: 30 MIC UNIT
- EXPANSION CAPABILITY |
|
|
|
|
|
| Dot MATRIX designed VFD Display |
| USB Recording (Using USB Memory stick, MP3 file) |
| High fidelity 60W mono channel amplifier |
| Built-in monitor speaker with control volume |
| 3 Band equalizer |
| Extra Microphone Jack with Volume |
| AUX input, AUX out, LINE input, LINE out |
| Connecting : 30 MIC unit |
| Expansion capability with IMS-300 (Sub amplifier) |
| Power Source : 100~120VAC or 220~240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements) |
| Weight : 5.8kg / 12.78lb |
| Dimensions (W x H x D) : 482 x 44 x 380 mm / 19 x 1.75 x 15in |
| ※ Specifications and design subject to change without notice. |
|
|
|
|
|
|
| - HIGH FIDELITY 60W MONO CHANNEL AMPLIFIER FOR EXTENSION
- CONNECTING : 30 MIC UNIT
- EXTENSION BY D-SUB TERMINAL |
|
|
|
|
|
| Gooseneck Microphone with LED ring |
| Built-in monitor speaker |
| Speaker level adjustable with rotary switch |
| Earphone jack output |
| LCD display (Reservation, Waiting order, Speaking Time Limitation) |
| Weight : 1.3kg / 2.86lb |
| Dimensions (W x H x D) : 129 x 78 x 208 mm / 5.1 x 3.1 x 8.2in |
| ※ Specifications and design subject to change without notice. |
|
|
|
|
- System Features and Outline
- Bilingual conference system. Either English interpretation (main audio) or Japanese interpretation (sub audio) is selectable for monitoring.
- Operations such as giving speech permission can be done from the operation PC. *Custom design.
- The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
- All speeches during the conference can be recorded clearly.
- Sub audio(Japanese interpretation) is not recorded.
- Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized on the Central unit.
- Speeches can be addressed to audience via sound amplification. * The sub audio output is not amplified
SPECIFICATION:
| Power Source | 7.4 V DC (battery), 9 V DC (AC adapter) (supplied from BP-900 battery (option) or AD-0910 AC adapter (option)) | | Power Consumption | MAX. 270 mA | | Infrared Emitter/Detector Wavelength | 870 nm (AM: Brightness modulation) | | Infrared Emitter/Detector Modulation Method | Frequency modulation | | Infrared Emitter/Detector Carrier Frequency | Transmission: Audio channel 1: 7.35 MHzAudio channel 2: 8.10 MHzAudio channel 3: 8.55 MHzAudio channel 4: 9.15 MHzControl channel: 6.45 MHz | | | Reception: Audio channel: 1.95 MHz | | Infrared Emitter/Detector Acceptance Angle | Vertical: 90°, Horizontal: 120° | | Infrared Emitter/Detector Emission Angle | Vertical: 90°, Horizontal: 120° | | Infrared Emitter/Detector Covering Range | 7 m (radius) | | Input | Microphone terminal: Combined type of XLR-4-31 (dedicated for connecting the optional TS-903 or TS-904) | | LED Indicator(TS-801·802) | Speech indicator (flashes when the unit is out of communications range), Power indicator (flashes when the unit is out of communications range or when the battery level is low) | | Battery Life | Approx. 10 hours (when the fully-charged BP-900 battery is used with "During Speech" to "Standby" ratio of 1:2) | | Operating Temperature | 0.to+40. | | Dimensions | 210(W )×65.9(H )×152(D )mm | | Weight | 630g | | Option | Microphone: TS-903, TS-904 (Select either one.)Lithium-ion battery: BP-900 AC adapter: AD-0910 |
|
Reviews
There are no reviews yet.