| Stock | Only 5 left in stock (can be backordered)
| In stock
| In stock (can be backordered)
| In stock (can be backordered)
| In stock (can be backordered)
| Available on backorder
|
| Content | NC3FXS-B
Female with noiseless ON-OFF rotary switch (shorts no. 2 and 3). Black metal
housing and gold contacts.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m
Insulation resistance - initial: > 2 G
- after damp heat test: > 1 G
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
Insert: PA 6.6 30% GR (glass reinforced)
Contacts: - female: CuSn6
- male: CuZn39Pb3
Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
Latch lock (female): St3K32
Strain-relief clamp: POM
Antikink bushing: PUR
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard
NC3FXS Female with noiseless ON-OFF rotary switch |
The handy dust protection cover can be used, when no cable connector is mated. The
cover is easy to use and does not block the connectors in the panel below when not in
use.Suitable for Speakon chassis connectors | XLR Cable Connectors / FXS Type
FX connector with noiseless ON-OFF switch short-circuiting contacts 2+3.
For use with a microphone without switch.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m
Insulation resistance - initial: > 2 G
- after damp heat test: > 1 G
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
Insert: PA 6.6 30% GR (glass reinforced)
Contacts: - female: CuSn6
- male: CuZn39Pb3
Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
Latch lock (female): St3K32
Strain-relief clamp: POM
Antikink bushing: PUR
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard | B-NE3-FPD - XLR chassis female 3 pin D-Type | Neutrik 3FXX Female XLR Cable Connectors / XX Series
The next generation of the worldwide accepted standard. Female connector with cage type contacts,
“solder stop" for ease soldering and additional ground contact for best contact integrity between
chassis and cable connector. Male connector without locking "window“; more stringent housing.
Rugged diecast shell in sleek and ergonomic design.
NC3FXX
3 pole cable connector, female. Nickel housing and silver contacts.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Ni over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Bronze CuSn8
Contact surface: gal 2 m Ag silver
Latch lock: ZnAl4Cu1
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20 | XLR Cable Connectors / EMC-XLR
The EMC-XLR cable connector is the answer for a noise-safe audio signal connection.
3 pole male / female XLR cable connector with capacitive cable shield - shell connection
to avoid RF-interference and LF-noise. 360° shield contact on female connector ensures
best possible shielding and chassis contact.
TECHNICAL DATA
Electrical
Rated current per contact: 5 A
Shielding effectiveness: > 55 db@ 1 GHz
Cableshield - shell connection: capacitive
Cableshield - Pin 1 connection: EMI suppression bead
Contact resistance after lifetime: < 3 m Ohm
Insulation resistance: initial > G Ohm, > 1 G Ohm
Dielectric strength: 1500 V dc after damp heat test
Mechanical
Retention method: chuck type
Life time (mating cycles): > 1000 cycles
Cable O.D. range: 4 - 7 mm
Wiring: soldering (AWG 20 - AWG 24)
Solderability: complies with IEC 68-2-20
Materials
Contacts: Brass (CuZn39Pb3), gold plated
Shell, shield contact: Zinc diecast (ZnAl4Cu1)
Strain relief clamp: POM
Bushing: PA / PU
Insert: PA 6.6 30% GR
Environment
Temperature range: -30° C to +80° C
Flammability: UL 94 HB |
Reviews
There are no reviews yet.