NEUTRIK SCL-DUSK PROTECTION COVER LID

1.73 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The handy dust protection cover can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.Suitable for Speakon chassis connectors

 

Read more

The handy dust protection cover can be used, when no cable connector is mated. The
cover is easy to use and does not block the connectors in the panel below when not in
use.Suitable for Speakon chassis connectors

Weight 0.30 kg

Reviews

There are no reviews yet.

Be the first to review “NEUTRIK SCL-DUSK PROTECTION COVER LID”

Your email address will not be published. Required fields are marked *

Quick Comparison

NEUTRIK SCL-DUSK PROTECTION COVER LID removeNEUTRIK 3-FXX-B 3PIN FEMALE XLR CONNECTOR removeNEUTRIK SCM-DUST PROTECTION COVER LID removeNEUTRIK NC3FXS Female with noiseless ON-OFF rotary switch removeNEUTRIK NC4MX-HD 4-pin Male XLR Cable Connector, Heavy-Duty removeNEUTRIK 3-FXX XLR FEMALE CONNECTOR remove
NameNEUTRIK SCL-DUSK PROTECTION COVER LID removeNEUTRIK 3-FXX-B 3PIN FEMALE XLR CONNECTOR removeNEUTRIK SCM-DUST PROTECTION COVER LID removeNEUTRIK NC3FXS Female with noiseless ON-OFF rotary switch removeNEUTRIK NC4MX-HD 4-pin Male XLR Cable Connector, Heavy-Duty removeNEUTRIK 3-FXX XLR FEMALE CONNECTOR remove
ImageNEUTRIK NC3FXS Female with noiseless ON-OFF rotary switch
SKUSCL3-FXX-BSCM3-FXSNC4MX-HD3-FXX
Rating
Price 1.73 incl. GR VAT 5.25 incl. GR VAT 2.12 incl. GR VAT 14.50 incl. GR VAT 6.26 incl. GR VAT 4.24 incl. GR VAT
Stock

In stock

Available on backorder

Only 1 left in stock (can be backordered)

In stock (can be backordered)

Only 1 left in stock (can be backordered)

In stock (can be backordered)

AvailabilityIn stockAvailable on backorderOnly 1 left in stock (can be backordered)In stock (can be backordered)Only 1 left in stock (can be backordered)In stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The handy dust protection cover can be used, when no cable connector is mated. The
cover is easy to use and does not block the connectors in the panel below when not in
use.Suitable for Speakon chassis connectors

NC3FXX-B 3 pole cable connector, female. Black metal housing and gold contacts. TECHNICAL DATA Electrical Number of contacts: 3 Contact resistance: ? 3 m Ohm Insulation resistance - initial: > 2 G Ohm - after damp heat test: > 1 G Ohm Dielectric strength: 1500 V dc Rated current: 16 A AWG: 2.5 mm²/14 AWG Capacitance between contacts: ? 4 pF Mechanical Lifetime: >1000 cycles Insertion / withdrawal force: ? 20 N Cable O.D. range: 3.5 mm - 8.0 mm Materials Shell: Zinc diecast ZnAl4Cu1, gal Cr over Cu plating Insert: Polyamide PA 6.6 30% GR (glass reinforced) Contacts: Bronze CuSn8 Contact surface: gal 0.2 ?m Au hard alloy over 2 ?m Ni Latch lock: ZnAl4Cu1 Strain-relief clamp: POM Antikink bushing: PA + PU Environmental Temperature range: -30° C to + 80° C Flammability: UL 94HB Solderability: complies with IEC 68-2-20 Compatibility: IEC 61076-2-103 standard

The handy dust protection cover can be used, when no cable connector is mated. The cover is
easy to use and does not block the connectors in the panel below when not in use.
Suitable for male chassis connectors.

XLR Cable Connectors / FXS Type FX connector with noiseless ON-OFF switch short-circuiting contacts 2+3. For use with a microphone without switch. TECHNICAL DATA Electrical Number of contacts: 3 Contact resistance: ? 3 m Insulation resistance - initial: > 2 G - after damp heat test: > 1 G Dielectric strength: 1500 V dc Rated current: 16 A AWG: 2.5 mm²/14 AWG Capacitance between contacts: ? 4pF Mechanical Lifetime: >1000 cycles Insertion / withdrawal force: ? 20 N Cable O.D. range: 3.5 mm - 8.0 mm Materials Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating Insert: PA 6.6 30% GR (glass reinforced) Contacts: - female: CuSn6 - male: CuZn39Pb3 Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard alloy over 2 ?m Ni Latch lock (female): St3K32 Strain-relief clamp: POM Antikink bushing: PUR Environmental Temperature range: -30° C to + 80° C Flammability: UL 94HB Solderability: complies with IEC 68-2-20 Compatibility: IEC 61076-2-103 standard

Male, heavy duty version with metal boot and stainless steel shell.

Electrical Specifications:

    * Number of contacts: 4
    * Contact resistance: = 3 m ohm
    * Insulation resistance, initial: > 2 G ohm; after damp
       heat test: > 1 G ohm
    * Dielectric strength: 1500 V dc
    * Rated current: 10 A
    * AWG: 2.5 mm²/14 AWG
    * Capacitance between contacts: = 4pF

Mechanical Specifications:

    * Lifetime: >1000 cycles
    * Insertion / withdrawal force: = 20 N
    * Cable O.D. range: 3.5 mm - 8.0 mm

Material Specifications:

    * Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
    * Shell (male): stainless steel and zinc diecasting combined.
    * Insert: PA 6.6 30% GR (glass reinforced)
    * Contacts: CuZn39Pb3
    * Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
       alloy over 2 ?m Ni
    * Strain-relief clamp: POM
    * Antikink bushing: PUR
    * Sealing jacket: EPDM

Neutrik 3FXX Female XLR Cable Connectors / XX Series The next generation of the worldwide accepted standard. Female connector with cage type contacts, “solder stop" for ease soldering and additional ground contact for best contact integrity between chassis and cable connector. Male connector without locking "window“; more stringent housing. Rugged diecast shell in sleek and ergonomic design. NC3FXX 3 pole cable connector, female. Nickel housing and silver contacts. TECHNICAL DATA Electrical Number of contacts: 3 Contact resistance:  3 m Ohm Insulation resistance - initial: > 2 G Ohm - after damp heat test: > 1 G Ohm Dielectric strength: 1500 V dc Rated current: 16 A AWG: 2.5 mm²/14 AWG Capacitance between contacts:  4 pF Mechanical Lifetime: >1000 cycles Insertion / withdrawal force: 20 N Cable O.D. range: 3.5 mm - 8.0 mm Materials Shell: Zinc diecast ZnAl4Cu1, gal Ni over Cu plating Insert: Polyamide PA 6.6 30% GR (glass reinforced) Contacts: Bronze CuSn8 Contact surface: gal 2 m Ag silver Latch lock: ZnAl4Cu1 Strain-relief clamp: POM Antikink bushing: PA + PU Environmental Temperature range: -30° C to + 80° C Flammability: UL 94HB Solderability: complies with IEC 68-2-20
Weight0.30 kg0.05 kg0.30 kg0.06 kg0.08 kg0.05 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.30 kg
Weight 0.05 kg
Weight 0.30 kg
Weight 0.06 kg
Weight 0.08 kg
Weight 0.05 kg