RCF NX M10-A 750W 10″ ACTIVE TWO-WAY MONITOR 750W

The NX M10-A is the most compact and lightweight speaker of the NX range.

It is specifically designed as a versatile tool from stage monitoring to a very accurate near field sound reproduction.
From live sound to playback music the NX M10-A guarantees high performances and is superior to many larger speakers thanks to the high efficiency of its 10” neodymium transducer.

- 1000w RMS, 2000w peak,  power delivers clarity, punch and more than enough headroom for any - performance or practice space - Specially-voiced 12-inch woofer and high frequency compression driver deliver your drum sounds - with precise, full response across the entire frequency range without any artificial colouration - (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator - XLR output to link another Strike Amp 12 or send your performance to another input device - Lightweight and flexible tilt-back cabinet design that can also be pole-mounted - Contour EQ switch to control your sound - Ground-Lift switch eliminates unwanted noise


Specifications:

• Output: Power 2000W (peak, 1300LF + 700HF), 1000W (continuous RMS, 650LF + 350HF)
• Low-Frequency: 12.0” (305mm) low-frequency driver, 3.0” (76mm) high-temperature voice coil
• High-Frequency: 1.4” (35mm) voice coil, neodymium-magnet high-frequency driver with precision waveguide
• Crossover Frequency: 2.0KHz
• Maximum SPL: 131dB (peak), 128dB (continuous) (dB-SPL @ 1m)
• Frequency Response: 53Hz – 20kHz (+3dB)
• Frequency Range: 46Hz – 22kHz (-10dB)
• Horn Coverage 90o horizontal x 60o vertical (nominal)
• Equalisation: Contour switch with low- and high-frequency +3dB boost

Connectors:
- (2) XLR/TRS 1/4” (6.35mm) combo inputs
- (1) XLR link output
- (1) IEC power cable input

• Controls Power switch, (2) volume control knobs (1 per input), EQ contour switch, ground-lift switch
• Indicators: (2) power LEDs (1 front-panel, 1 rear-panel), clip limiter LED
• Protection: Electronic clip, thermal & transducer overdrive
• Input Voltage: 100V~, 110–120V~, 220–240V~; 50/60Hz (switchable)
• Fuse: 100–120V T10AL AC250V 220–240V T5AL AC250V
• Consumption: 800W
• Enclosure: Trapezoidal, injection-molded polypropylene enclosure with perforated steel grille

Dimensions: (width x depth x height) 605 x 354 x 350mm
Weight: 16.3kg

The LD Stinger MON121AG2 is a compact active stage monitor for all mobile applications.

The specially developed 12" coaxial speaker with an integral 1" HF driver and powerful ferrite magnets stands out because of a precisely symmetrical dispersion over 75° x 75° and attains a maximum sound-level pressure of 124dB with maximum resistance to feedback. It is driven by a Class AB power amplifier with a power output of 250W RMS. The frequency response curve is 80Hz - 20kHz.

Dependable operation of the LD MON121AG2 is ensured by a limiter that prevents overloading of the speaker and a protection circuit that guards against short-circuiting.

The input is a XLR-jack combo socket, an XLR output permits looping through of the signal. Other connector panel features include a volume control, IEC power socket, LED indicators of various colours for power, signal, and the limiter function.

The elegant looking bass-reflex enclosure of the LD MON121AG2 is made of 15mm-thick multiplex finished with a durable coating. A sturdy metal grille guards against speaker damage, and ergonomically milled handles make transport easier. The monitor angle is 35°.

• Type: active
• Woofer size: 12“
• Woofer size: 304 mm
• Woofer type: coaxial speaker
• Woofer magnet: ferrite
• Woofer brand: custom made
• Woofer voice coil: 2
• Woofer voice coil: 50.8 mm
• HF driver size: 1“
• HF driver size: 25.4 mm
• HF driver magnet: ferrite
• HF driver brand: custom made
• HF driver voice coil: 1“
• HF driver voice coil: 25.4 mm
• Amplifier: Class A / B
• Dispersion angle (H x V): 75° x 75°
• Power output (RMS): 250 W
• Power output (peak): 500 W
• Frequency response: 80 Hz - 20 kHz
• Crossover frequency: 2200 Hz
• SPL (1 W/1 m): 100 dB
• Max. SPL (continuous): 116 dB
• Max. SPL (peak): 124 dB
• Protection: limiter, short-circuit
• Controls: Volume, On / Off
• Indicators: Power, Signal, Limit
• Number of line inputs: 1
• Line input connectors: XLR/ 6.3 mm jack (combo)
• Number of line outputs: 1
• Line output connectors: XLR
• Power supply: transformer
• Operating voltage: 230 V AC / 50-60 Hz
• Cabinet material: 15 mm plywood
• Cabinet type: bass reflex
• Monitor angle: 35°
• Width: 440 mm
• Depth: 360 mm
• Height: 514 mm
• Features: Ergonomic insert handles

The HD 12-A offers an extremely linear response and a precise, deep low frequency control. The 12” woofer guarantee a superior sound projection indoor and outdoor. It is the ideal speaker for main front of house in small PA systems, for high power monitoring and it is the best solution where higher power is required for various applications in larger venues.

• • Live Sound
• • Rental
• • Portable PA
• • Stage Monitoring
• • Clubs

General Specs

1200 WATT PEAK, 600 WATT RMS
Digital Bi-amp
DSP Sound Processing
RCF Precision Transducers
130 dB MAX SPL

Acoustical Specs

Frequency Response -3 dB:45 Hz ÷ 20000 Hz
Max SPL:130 dB
Horizontal coverage angle:90°
Vertical coverage angle:60°
Compression Driver:1“, 1.7" voice coil
Woofer:12“, 2.5" voice coil

Inputs/Outputs

Input signal:bal/unbal
Input connectors:Jack-XLR male
Output connectors:XLR female
Input sensitivity:-2 dBu / + 4 dBu

Processor Section

Crossover frequencies:1600 Hz
Protections:thermal, RMS
Limiter:Fast limiter
Controls:Volume, EQ shape, Mic/line

Amplifier Specifications

Total power:1200 W PEAK
High frequencies:300 W PEAK
Low frequencies:900 W PEAK
Total power:600 W RMS
High frequencies:150 W RMS
Low frequencies:450 W RMS
Connections:VDE AC socket

Cabinet Specs

Cabinet Material:Composite PP
Hardware:1 x M10 top, 1 x M10 bottom, 3 x M6 bottom
Handles:1 top, 2 side
Pole Mount/Cap:Yes
Grille:Steel
Colour:Black

Size/Weight

Height:647/25.47 mm/inch
Width:380/14.96 mm/inch
Depth:380/14.96 mm/inch
Net Weight:18.3/40.34 kg/lbs

The LDMON101A features a high end 10" co-axial speaker with a 1" compression driver and delivers 150 W RMS output power.

The Volex power supply system allows a secure connection of further active monitors, this feature enables the installation of a big active stage monitor system while using only one power plug. The monitor also features a softclip-limiter as well as a volume control.

The Housing was built out of a high quality plywood with a high resistance textured finish. The stabile front guard ideally protects the speakerbox. 

• Model Name: LDMON101A
• Type: Bass Reflex
  
• Components:
  • Woofer / Compression Driver: 10" / 1" Coaxial Custom Made Speaker
  • Amplification: Class A / B
• Dispersion: 75° x 75°
• Power: 150 W RMS
• Frequency Range: 90 Hz- 20 Khz
• SPL (1 W / 1 m): 99 dB
• Max. SPL: 121 dB
• Protection: Limiter, Circuit and Overcurrent
• Controls: Volume, On/Off Switch
  
• Indicators: Signal, Power, Limit
• Connectors:
  • Input: Line: XLR /6,3 mm jack (combo)
    
  • Output: Line: XLR
• Power Supply: Transformer
• Cabinet Material: 15 mm Plywood
• Cabinet Surface: Painting
• Dimensions: 360 x 370 x 425 mm
• Features: Ergonomic milled handles, VOLEX power plug input / output