| Content | 9.2-Channel Network A/V Receiver
A higher standard of sound
The TX-RZ740 not only elevates sound, but also that satisfied feeling you get every time you switch it on. The extra weight of the custom transformer, custom 10,000 μF capacitors, and aluminum heat-sink speak of an amp built for high-current power, enabling 3D audio to exhibit true-to-life spatiality and pin-point localization. Bass force is terrific, dynamics blindingly fast, and resolution grainless. Next-Generation Network Audio gathers multi-room platforms supported by 802.11ac*1 Wi-Fi®, or enjoy powered and unpowered audio distribution. The receiver, which supports up to 7.2.4-ch of 3D sound with external amp, is certified for IMAX® Enhanced*2 and is THX® Certified Select™ for a cinema-reference experience. From how it sounds to the way it makes you feel, the TX-RZ740 is made to savor now and in the future.
PRODUCT HIGHLIGHTS
- 185 W/Ch THX® Certified Select™ RZ Series DAA system
- Works with Sonos, Chromecast built-in*1, AirPlay 2, DTS Play-Fi®, FlareConnect™*2, Spotify®, Amazon Music, TIDAL, Deezer, TuneIn*3
- Supports 5.2.4-ch Dolby Atmos® and DTS:X® playback
- 11.2-ch pre-outs and processing for 7.2.4 layouts
- Dolby Atmos Height Virtualizer*4
- IMAX® Enhanced*4 certified for IMAX® digital remasters
- Refined HDMI® grounds, SoC board, and power amps
- HDMI Sub/Zone 2 output*5 for a sub-display or projector
- Quad-core SoC supports 802.11ac (2x2 MIMO) Wi-Fi®*6
- Zone 2 and Zone 3 speaker outputs
- Zone 2 and Zone 3 DACs for D/A audio in three rooms
- Zone 2/Zone B and Zone 3 line-outs share D/A audio
- Stereo Assign Mode supports Height-channel playback
- DSP-based Vocal Enhancer improves dialog audibility
- OSD features media input/output data display function
- HDMI supports 4K/60p, 4K HDR, BT.2020, HDCP 2.2
- AccuEQ Advance 9-point calibration with AccuReflex™
- Volume memory-presets for A/V inputs via front panel
- IP control, RS-232C, 12 V trigger output, and IR input
AMPLIFIER FEATURES
185 W/Ch (6 Ω, 1 kHz, 10% THD, 1 channel driven), 175 W/Ch (6 Ω, 1 kHz, 1% THD, 1 channel driven, IEC)
- Certified for IMAX Enhanced and THX Certified Select
- Dynamic Audio Amplification with RZ Series Build
- Ultra-wide 5 Hz–100 kHz frequency response
- Custom-Built High-Current Low-Noise Power Transformer
- Custom high-current smoothing capacitors
- Non-phase-shift amp topology with discrete output stage
- Thick resonance-controlled extruded aluminum heat-sink
- Strengthened power-supply line for high-current dynamics
- Refined HDMI grounds and short signal-paths reduce noise
- Isolated SoC board reduces interference
- High current capability for 4-ohm speaker drive
- AKM (AK4458) 384 kHz/32-bit multichannel D/A conversion
- VLSC™ (Vector Linear Shaping Circuitry) noise filtering (Front L/R)
- PLL (Phase Locked Loop) anti-jitter technology for SPDIF audio
- Direct and Pure Audio modes for source-authentic expression
-
VIDEO & AUDIO SUPPORT
Supports HDCP 2.2, 4K/60p, HDR (Dolby Vision™, HDR10, HLG), BT.2020, 4:4:4/24-bit, 3D Video, ARC (Audio Return Channel), DeepColor™, x.v.Color, and LipSync via HDMI
- Dolby Atmos, DTS:X, Dolby® TrueHD, and DTS-HD Master Audio®
- Dolby Atmos Height Virtualizer 3D processing
- Dolby Surround® and DTS® Neural:X upmixing technology
- IMAX Mode for IMAX Enhanced content
- THX® listening modes for movies, music, and games
- Sound optimization for games (Rock, Sports, Action, and RPG)
- Theater-Dimensional virtual surround-sound function
-
NETWORK FEATURES
Next-Generation Network Audio supports multi-room streaming and Onkyo Controller*7
- Works with Sonos for the Sonos Home Sound System*8
- Chromecast built-in and voice control*9 with the Google Assistant
- AirPlay 2 multi-room audio and voice control*10 with Siri
- DTS Play-Fi multi-room audio via Onkyo Music Control App*7
- FlareConnect multi-zone audio with compatible components
- Quad-core SoC supports high-speed 802.11ac (2x2 MIMO) Wi-Fi
- Hi-Res Audio playback via network (DSD 11.2 MHz/5.6 MHz/2.8 MHz*11; FLAC, WAV [RIFF], AIFF, and ALAC to 192 kHz/24-bit*12)
-
CONNECTION FEATURES
7 HDMI inputs (1 front), 2 outputs (Main [ARC], Sub/Zone 2)
- 1 component video input (assignable)
- 2 composite video inputs (assignable)
- 2 digital audio inputs (optical and coaxial, assignable)
- 6 analog RCA inputs (assignable)
- 3.5 mm mini-stereo analog input (front)
- 1 phono input with built-in MM equalizer for turntable
- 3.5 mm setup mic input for AccuEQ Advance (front)
- 6.35 mm headphone jack (front)
- 11.2-channel pre-outs including Zone 3 pre-/line-out (analog RCA)
- Zone 2/Zone B analog RCA line-level outputs
- 9 screw-type speaker posts (including Zone 2)
- Bi-directional Ethernet terminal for network and IP control
- USB input (5 V/1 A) for audio playback (rear)
- RS-232C serial port for remote control
- IR (infrared) input for remote-control extenders
- 12 V trigger output (Main, assignable, 100 mA)
- AC socket for detachable IEC power cord
|
|
Designed for the ultimate music and movie surround sound experience, the Marantz MM8077 7-channel power amplifier delivers power and detail, and is rated at 150 watts per channel into 8 ohms, and 180 watts per channel into 6 ohms.
The power supply features a high current toroidal power transformer along with high power (71WVDC) filter capacitors with a total 100,000µF capacitance to easily handle sharp short-term transient peaks.
|
| |
Featuring our unique current feedback discrete power amp output stages that are identical for all channels, the MM8077 is equipped with multiple high current discrete power transistors that feature high slew rate and wide operating bandwidth to extract the most detail from todayʼs high resolution audio formats.
The output devices are mounted on our unique dual extruded aluminum alloy heat sink assembly, configured in a tunnel arrangement that provides both passive and active cooling. The massive heat sinks feature multiple ribbed fins that provide a large passive cooling area, and the assembly is book-ended with a whisper quiet fan that automatically kicks in to provide near silent active cooling when the soundtrack heats up. As the fan is mounted internally directly to the heat sinks, and not externally to the chassis cover as is often the case, even when itʼs running, itʼs designed to be whisper quiet.
|
| |
For maximum connectivity, the MM8077 features both unbalanced (RCA) and balanced (XLR) inputs, and each amp channel can be configured to use your choice of input connector. The loudspeaker terminals feature audiophile-grade construction, and are gold-plated for maximum signal transfer, and they can easily handle a wide range of audiophile speaker cable connectors.
|
| |
The MM8077 features a DC trigger input for external power on/off control, and thereʼs also dual RC-5 remote control in/out jacks for connection to a compatible Marantz A/V pre-amp/processor.
The copper-plated chassis provides isolation from extraneous noise, and features a multi-layer reinforced bottom panel assembly for maximum rigidity along with triple-layer top cover. Elegantly finished in anodized black satin, the MM8077 features the classic Marantz ringed porthole display with a blue illumination accent that includes a display on/off function.
|
| Front Panel | Aluminum/Glass-reinforced resin |
| Power Requirement | AC 120 V, 60 Hz |
| Power Consumption | 800W (Standby: 0.4W) |
| Dimensions W x H x D (Inchs) | 17.32" x 7.29" x 15.1“ |
|
Slim 5.2Ch 4K Ultra HD AV Receiver with HEOS Built-in
Experience exceptional audio performance from the slim profile Marantz NR1510 5.2ch 4K Ultra HD AV receiver that drives elevated surround sound and high-fidelity audio from a compact chassis. At half the height of a traditional AV receiver, the NR1510 features the latest in HDMI connectivity and delivers high-resolution surround sound from Dolby TrueHD and DTS-HD Master Audio. Six HDMI inputs — including one on the front panel — support the latest video and picture formatting and eARC transmission of enhanced audio. Stream music from popular online sources, and easily connect your analog turntable to the receiver to enjoy your vinyl collection. Control the NR1510 with voice control compatibility via Amazon Alexa, Google Assistant and Apple Siri.
Key Features
- Slim profile that’s half the height of a traditional AV receiver delivers exceptional performance and the most musical sound
- 5-channel discrete power amplifier, 50W per channel (8-ohm, 20Hz – 20kHz, 0.08% THD, 2 Ch. drive)
- 6 HDMI inputs with full HDCP 2.3 support
- Supports Dolby Vision, Hybrid Log-Gamma (HLG), eARC and ALLM for enhanced picture and audio
- 4K/60 Hz full-rate pass-through, 4:4:4 color resolution, HDR10 and BT.2020
- Surround format support for Dolby TrueHD and DTS-HD Master Audio
- ALAC, FLAC and WAV lossless file decoding up to 24-bit/192-kHz for high-resolution listening
- HEOS Built-in for multi-room streaming, music streaming and voice control
- Built-in Wi-Fi with 2.4GHz/5GHz dual band support (dual antenna)
- Supports all major voice control agents and streaming services
- Integrated phono input to directly connect your turntable
| Power Output (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive) |
50 W |
| Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive) |
60 W |
| Power Output (6 ohm, 1 kHz, 10% 1ch Drive) |
100 W |
|
The MM7055 power amplifier produces 140 watts of high current output from each of its five channels. This is "real world” power, too, measured across the full audio bandwidth (20 Hz – 20 kHz) at 8 ohms with 0.08% Total Harmonic Distortion. Among other attributes, this means the MM7055 is capable of long-term power delivery into low impedance speakers.
| Front Panel | Aluminum/Glass-reinforced resin |
| Power Consumption | 660W (Standby: 0.2W) |
| Dimensions W x H x D (Inchs) | 17-3/8 x 7-3/16 x 15-1/8 |
|
Premium 9.2 channel AV Surround Receiver offering the most advanced 3D audio suite with Dolby Atmos, DTS:X and Auro-3D built-in, plus unparalleled music playback options, thanks to our HEOS technology. Coming soon - control with Alexa voice commands.
AMAZING 3D-SOUND.
Enjoy the most complete surround sound experience with latest audio formats Dolby Atmos, DTS:X and Auro-3D built-in. Most remarkably, the 9 channel amplification allows for setting up a 7.1.2 or 5.1.4 3D experience out of box. The AVR-X4400H even supports 7.1.4 speaker configuration by adding an external stereo amplifier thanks to its 11.2 channel processing capability.
SOUND IN THE RIGHT PLACE.
Feel every dimension in Dolby Atmos. Dolby Atmos transports you into the story with moving audio that flows all around you with breathtaking realism. Enjoy a 5.1 surround sound speaker system and 4 additional overhead speakers or 4 Dolby Atmos elevation speakers for the ultimate home theater experience - including Dolby Surround upmixer for legacy content.
FUTUREPROOF IN ANY WAY.
All eight HDMI inputs and three HDMI outputs feature HDCP 2.2 compatibility and the latest HDMI specifications, including 4K Ultra HD 60Hz video, 4:4:4 Pure Color sub-sampling, High Dynamic Range (HDR) and 21:9 video, 3D, and BT.2020 pass-through support. It is even ready for Enhanced Audio Return Channel (eARC) for 3D audio playback through TV apps. The feature will be enabled via a future firmware update.
MEASURE YOUR SOUND TO YOUR ROOM.
The AVR-X4400H features the most advanced Audyssey MultEQ XT32 room acoustic measurement system including Audyssey Dynamic Volume, Dynamic EQ, LFC and SubEQ HT. Through these technologies, and with the supplied microphone, it exactly analyzes each speaker's output to optimize the overall listening experience. With the additional Audyssey MultEQ Editor App (available for purchase), very advanced users can even go further "under the hood" if desired.
|
Features
7.2-Channel AV Receiver Featuring Class D3 (Direct Energy HD) Amplifier, Ultra HD (4K/60p) Upscaling/Pass-through, DSD Playback via Network, Subwoofer EQ, Dual Subwoofer Preout, Built-in AVNavigator, and Insulated Dual Chassis
Main Features
- Direct Energy HD amplifier
- Output Power per Channel 200W
- Impedance at Output Level 4Ω
- Number of Channels 7
- 4Ω Speaker Support
- Signal / Noise Ratio 101 dB
- Input Connections Front:
• 1 x HDMI
• 1 x USB 2.0 (iPod/iPhone Digital Audio, USB drive)
• 1 x MCACC Setup MIC
Rear:
• 6 x HDMI (1 for HDMI/MHL)
• 1 x Ethernet
• 2 x AV Composite
• 1 x Audio (Assignable)
• 2 x Digital Coaxial (Assignable)
• 2 x Digital Optical (Assignable)
• 2 x Component Video(Assignable)
• 1 x IR
• 1 x USB charge port for AS-WL300 Wireless Converter
- Output Connections Front:
• 1 x Phones out
Rear:
• 2 x HDMI (selectable for MAIN ZONE/HDZONE)
• 1 x AV Composite
• 1 x Monitor Component
• 1 x Monitor Composite
• 1 x IR
• 2 x Preout Subwoofer
• 9 x Speaker out
- File Playback • AM/FM Tuner (63 presets)
• Internet Radio with vTuner
• Spotify Ready
• Apple AirPlay
Via LAN/USB:
• MP3, WAV, AAC, WMA, FLAC, AIFF, DSD, and Apple Lossless
• iPod Digital Transmission
192 kHz/24-bit audio playback:
WAV, FLAC, and AIFF
Multi-channel audio playback (5.0/5.1, 24-bit)(*):
WAV, FLAC
Gapless playback:
• WAV, FLAC, AIFF, and Apple Lossless(**)
Via HDMI:
• SACD
(*) Up to 96 kHz
(**) Except multi-channel audio streaming
- MHL Terminal for Android Smartphones
- HD Audio Formats • Dolby TrueHD
• DTS-HD Master Audio
- Audio Return Channel
- Stand-by Pass Through
- Control with HDMI (+)
- On-Screen Display (GUI) Dot Matrix with Album Artwork (HDMI only)
7 languages:
• Dutch
• English
• French
• German
• Italian
• Russian
• Spanish
- Sleep Timer
- Firmware updates (via Internet or USB)
- AVNavigator
- Bluetooth (Built-in, with aptX support)
- Internet Radio (vTuner)
- Spotify Connect (+)
- DLNA Certified (+) (v1.5)
- HTC Connect (+)
- Windows 8.1 Compatible
- Remote Control Glow-key, learning remote control
- Eco Mode
Input & Output connections
- Audio/Video Output
- Bi-Amplifier
- Component Video Input/Output 2/1 (assignable)
- Composite Video Input/Output 2/1
- Digital Optical Input/Output 2/- (assignable)
- Digital Coaxial Input/Output 2/- (assignable)
- Ethernet (+)
- HDMI Front Input
- HDMI Input/Output 7 (assignable) / 2
- HDMI version 2.0
- Headphone
- IR In/Out (+) 1/1
- Large speaker terminals
- Pre-amp Output (2.1 ch)
- Speaker A/B Versatile speaker configuration
- USB Host (Front) (+)
Apps
- iControlAV5 (+)
- AVNavigator Built-in
Apple Compatibility
- Works with iPod
- Works with iPhone
- AirPlay Compatible Generations Via USB:
• iPhone 5/5S/5C
• iPhone 4/4S
• iPhone 3G/3GS
• iPhone
• iPod touch 5G/4G/3G/2G/1G
• iPod nano 7G/6G/5G/4G/3G
- Supported Functions • Audio playback
• On-screen album art
• Battery charging
Network Features
- Wireless LAN (optional AS-WL300 adapter required)
- Network Standby
Surround Sound Formats
- Dolby Pro Logic IIz (+)
- Dolby TrueHD (+)
- DTS Neo X
- DTS-HD Master Audio (+)
- Surround Modes (+) 11+1 (Action, Drama, Advanced Game, Sports, Classical, Rock/Pop, Extended Stereo, Front Stage Surround, Sound Retriever AIR, ECO MODE 1, ECO MODE 2 + Phones Surround)
Audio Features
- AM/FM Tuner with RDS
- Tuner Pre-set Stations 63
- Auto Level Control (+) (Multi-channel)
- Auto Surround
- Bass/Treble Tone Controls
- Dialogue Enhancement (+)
- Digital Noise Reduction (+)
- DSD-to-PCM Convertor (2 channel / Multi-channel)
- Dynamic Range Control
- Wide Surround
- Headphone Surround
- Front Stage Surround Advance (+)
- Multizone Function (+) (2)
- Mute Level Setup
- Volume Limit Setup
- Power ON Level Setup
- Phase Control (+)
- Phase Control Plus
- Auto Phase Control Plus
- Automatic Crossover Detection
- MCACC (+) (Advanced)
- Manual MCACC
- PQLS (+) Bit-stream / Multi-surround / 2-channel
- Sound Delay (LipSync) (+)
- Auto Sound Retriever
- Auto Sound Retriever for ARC
- Sound Retriever AIR (+)
- Sound Retriever link
- Standing Wave Control (+)
- Stream Direct (+)
- Symmetric EQ (+)
- Subwoofer EQ
- Virtual Speakers
- Virtual Depth
- Virtual Surround Back (+)
- Virtual Height
- Virtual Wide
- X-Curve (+)
- Polarity Check
Video Features
- Frame Rate Conversion
- Deep Colour (+)
- 3D Ready
- 3D Noise Reduction
- Triple HD Noise Reduction
- x.v.Colour (+)
- Video Scaler
- Upscaling to 1080p
- 4K Pass Through
- 4K Upscaling
- 4K (MAIN ZONE) Up to 4K60p, 4:4:4, 24-bit
- 4K Dual (MAIN/HD ZONE) Up to 4K60p, 4:2:0, 24-bit
- Resolution Parameter • AUTO/PURE
• 480p
• 720p
• 1080i/ 1080p/ 1080-24p
• 4K/4K-24p
- Aspect Through / Normal
- I/P Conversion
- Advanced Video Adjust
- PureCinema
- Stream Smoother
- Stream Smoother Link
- HDMI Standby Through
- HDMI Standby Input Switching
Power Output
- Condition 1kHz, 1% THD
- Rated Power Output • Simultaneous Power Output: 560W all channels
• 6Ω: 160W per channel
• 4Ω: 200W per channel
- Input (Sensitivity/Imp.): LINE etc. 380 mV / 47 kΩ
- Signal-to-Noise Ratio: LINE etc. (DIN) 101 dB
- Power Requirements AC 220-230V / 50/60 Hz
- Power Consumption (in use / standby) 290 W / 0.1 W
- Auto Power Down
Construction
- Advanced Direct Construction
- Design • Insulated Dual Chassis
• Rigid Trans-Stabiliser
Amplifier Specifications
- Amplifier Direct Energy HD Amplifier
- Multi-channel Simultaneous Drive
- Digital Signal Processor Texas Instruments AureusTM (TMS320DA808)
- D/A Converter 192 kHz / 24-bit
- A/D Converter 96 kHz / 24-bit
- Hi-bit / Hi-sampling Hi-bit 24 processing
- Dimensions (W x H x D) 435 x 185 x 441 mm
- Weight 14.7 kg
|
Reviews
There are no reviews yet.