Content |
For years bassists have been combining guitar and bass amps to remarkable effect, adding harmonics and layers of overdrive from a guitar amp to their core bass tone in pursuit of the ultimate live sound. This ʽbi-ampʼ trend got us thinking… Why drag two amps to the show when you could take just one? The result is the OB1 Series of class A/B rack mountable bass heads which take care of this and much more besides.
The key to the OB1ʼs unique sound is our footswitchable Blend circuit which adds a veneer of controllable gain and increased harmonic content to the upper registers of the input signal. The lower frequencies and clean signal are left alone, staying warm and clear just as they would be in a ʽbi-ampedʼ setup. Depending on where the Gain and Blend controls are set, the possibilities are limitless. Punch in the Blend control to achieve anything from a transparent clean boost, to all-out filthy grind, and everywhere in between.
OB1-300 is the 300 Watt version, sharing the same features and 2U rack dimensions as the more powerful OB1-500.
|
Marshall VBC810 Bass Amplifier Cabinet for use with VBA400
The VBC810 is a specially designed, heavy duty 8x10" cabinet for use with the VBA400 head. Built as only Marshall knows how, it features four separate sealed chambers which help to prevent unwanted cabinet resonance while adding to the structural integrity of the unit. It is also lined with sound absorbent wadding to further help dampen internal resonance.
It comes loaded with custom designed loudspeakers which have been specially designed to handle the power of the VBA400's output while giving you superb, professional performance. Operating at 4 Ohms impedance it has been designed to perfectly complement the VBA400. As the amplifier will accept a load of 2 Ohms, combinations of two cabinets can be used to create an awesome bass rig.
Clad in Marshall's trademark, heavy duty, black vinyl, the 640 Watt VBC810 boasts roadworthy, high grade fittings, including a recessed handle on the bottom for easy lifting, castors and kick plate for easy tilt and roll capability.
Speaker Configuration 8x10" Power Handling (RMS) 640W Impedance 4 Ohms Weight - 73 kgs Dimensions (mm) 675x1265x410
|
All of our BG250 combos share the same fundamental tone, yet they alsosound unique. Subtle details and the fact that you can customize the amps with TonePrint effects and settings makes sure that you will always be able to get the sound you are looking for no matter which BG250 you choose.
- Ultra-light, Ultra-powerful
- Two TonePrint Slots
- Intelligent Tone Shaping Tools
- Built-in Tuner for 4, 5 and 6 String Basses.
BG250-112 gives you the best from both worlds. Tight and powerful sound with a strong presence in the mids. Make it bassy and old school, or modern and crisp. The choice is yours! It's light yet super powerful,features intelligent tone shaping toolsand has an onboard tuner for 4, 5 and 6 string basses.Add to that, the ultimate effects solution: Dual TonePrint! You can swap effect types on the fly and you even get custom TonePrints created by some of the greatest bass players totally free of charge.
Power: | 200 Watts> | Speaker: | 1 x 12'' | Modeling Technology: | No | Effects: | Yes | Tuner: | Υes | Power: | 250 Watts | Driver: | 1 x 12'' Custom driver woofer,1 x 1'' Custom piezo tweeter | Effects: | 6 Effect Types | Modeling Technology: | - | Channels: | 1 | Equalizer: | Bass: Cut@80Hz / Boost@100Hz,Mid: Cut@500Hz / Boost@800Hz,Treble: Cut@1,800Hz / Boost@2,500Hz | Output: | 1x Balanced Di Out - Seamless Recording or PA output - Headphone out x 1 | Inputs: | 1 x Rehearsal Input | Tuner: | Yes | Controls: | Gain, Bass, Middle, Treble, Toneprint A/B, Master, Mute, Pre EQ/Post EQ | Footswitch: | Yes ( Optional ) | FX Loop: | - | DI Socket: | Yes | Dimensions ( W x H x D ): | 45,8 x 37.5 x 54 cm. | Weight: | 16 kg |
|
Ampegʼs Portaflex PF-500 bass head delivers a staggering 500W of power in an ultra-compact design providing pure Ampeg tone in an extremely portable package. Precise tone controls and gig-friendly input/output options provide ultimate flexibility. Pair it with our PF Series flip-top cabinets for the vintage styling and portability of Ampegʼs iconic Portaflex originals.
Power: | 500W RMS @ 4 ohms 5% THD | Channels: | 1 | Equalizer: | 3 band EQ | Inputs: | Bass Input, Audio Input, Power Amp In | Outputs: | Headphones Output, Speaker Output Speakon, Tuner Out, Preamp Out, XLR Line Out Jack | Controls: | Mute, -15db, Compression, Gain, Ultra Hi / Lo, 3 Band EQ, Frequency, FX mix, Volume | Dimensions ( W x H x D ): | 27.5 x 6.9 x 27.2 cm | Weight: | 3.5 kg |
|
Features: - 2x10 " Speaker - Impedance : 4Ω - Power : 300W - Volume control - Dimensions (mm) : 660 x 480 x 690 - Weight 35.20 kg |
Eden WTX264 Bass Amplifier Head Features: >Eden's proprietary Enhance control >3-band EQ with Dynamic Bass Boost and Mid-shift functions >Studio-quality DI with level and ground lift >FX loop >Stereo Aux Inputs >Tuner and Headphone outputs >Two 1/4" and one NL-4 (Speakon) Speaker outputs >Optional Rack-mount hardware >Power 4 Ohms: 260-300W RMS @4 Ohms >Damping Factor: 4000 >Distortion: .006% >Frequency Response: 10Hz-20KHz ±2dB >Headroom: 3dB >Dimensions: 8“W X 2.5“H X 9“D >Weight: 4.3 LBS |
Reviews
There are no reviews yet.