ORTOFON Concorde MkII DIGITAL TWIN Cartridge DJ

Concorde DIGITAL is designed to extend the life of timecode vinyl and minimize errors in decoding

• At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl.
• This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal. 
• Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.

• Stylus Type Spherical
• Tracking Force 4.0 g
• Output Voltage 10 mV
• Frequency Range 20–18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DIGITAL

• Output voltage at 1000 Hz, 5cm/sec: 5 mV
• Channel balance at 1 kHz: 2 dB
• Channel separation at 1 kHz: 20 dB
• Channel separation at 15 kHz: 15 dB
• Frequency range at - 3dB: 20-20.000 Hz
• Frequency response: 20-18.000 Hz + 3 / - 2 dB
• FIM distortion at recommended tracking force, DIN 45.542:
• Tracking ability at 315Hz at recommended tracking force: 70 µm
• Compliance, dynamic, lateral: 7 µm/mN
• Stylus type: Spherical
• Stylus tip radius: R 26 µm
• Equivalent stylus tip mass: 0,5 mg
• Tracking force range: 3,0-5,0 g (30-50 mN)
• Tracking force, recommended: 4,0 g (40 mN)
• Tracking angle: 20°
• Internal impedance, DC resistance: 750 Ohm
• Internal inductance: 450 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 200-600 pF
• Cartridge colour: Black
• Cartridge weight: 5 g
• Replacement stylus unit: PRO S

Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics.  The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

For DJs that require increased tracking ability, the Scratch is up to the task.  Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces.  With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.

For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforeced rubber suspension, DJs don't need to worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.

This Ortofon Concorde Set contains;
- 2x Ortofon Concorde Scratch Element
- Ortofon Needle Brush
- All parts come in a special Ortofon box casing

Features:

Type: MC-type

Playback frequency range: 15-50,000Hz

Output voltage: 0.3mV (1kHz and 3.54cm/sec.)

Channel separation: 30dB (1kHz)

Output balance: 0.5dB (1kHz)

Stylus pressure: 1.8-2.2g (2.0g standard)

Coil impedance: 10O (1kHz)

DC resistance: 10O

Load resistance: More than 100O (when head amp connected)

Coil inductance: 22µH (1kHz)

Static compliance: 40×10-6cm/dyne

Dynamic compliance: 10×10-6cm/dyne (100Hz)

Stylus needle shape: Oval (0.3×0.7mil)

Cantilever: Duralumin tapered pipe

Vertical tracking angle: 23°

Dimensions: H16×W16.6×D26.5mm

Weight: 6.9g

Accessories: Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1