Content | The MIX is a general-purpose model for scratch and back-cueing
• Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well.
• It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music.
• With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.
Excellent price-to-performance ratio.
- Stylus Type Spherical
- Tracking Force 3.0 g
- Output Voltage 6 mV
- Frequency Range 20-20.000 Hz
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Cartridge weight - 18,5 g
Replacement stylus unit - MIX |
Type: MC-type
Playback frequency range: 20-20,000Hz
Output voltage: 0.35mV (1kHz and 5cm/sec. horizontal signal)
Horizontal/vertical output ratio: 30dB (1kHz)
Output balance: 1.0dB (1kHz)
Stylus pressure: 2.3-2.7g (2.5g standard)
Coil impedance: 10O1kHz
DC resistance: 10O
Load resistance: More than 100O(when head amp connected)
Coil impedance: 28µH (1kHz)
Static compliance: 20×10-6cm/dyne
Dynamic compliance: 6×10-6cm/dyne (100Hz)
Needle shape: Round needle (0.65mil)
Cantilever: Duralumin pipe
Vertical tracking angle: 23°
Dimensions: H16×W16.6×D26.5mm
Weight: 6.9g
Accessories: Non-magnetic screwdriver x1, Washers x2, Protector x1, Cartridge fastening screw 13mm×2, 19mm×2, Nut x2, Brush x1, PCOCC lead set x1
| Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.
Output voltage at 1000Hz, 5cm/sec. |
11 mV |
Channel balance at 1kHz |
1,5 dB |
Channel separation at 1kHz |
22 dB |
Channel separation at 15 kHz |
- |
Frequency range at -3dB |
20-18.000 Hz |
Frequency response |
20-18.000 Hz - 3 dB |
Tracking ability at 315 Hz at recommmende tracking force |
90 μm |
Compliance, dynamic lateral |
12 μm/m N |
Stylus type |
Spherical |
Stylus tip radius |
R 18 μm |
Tracking force range |
3,0 g (30 mN) |
Tracking force recommended |
4,0 g (40 mN) |
Tracking angle |
20° |
Internal impedance, DC resistance |
1.680 Ohm |
Internal inductance |
920 mH |
Recommended load resistance |
47 kOhm |
Recommended load capacitance |
200-400 pF |
Cartridge weight |
5 g |
Replacement stylus unit |
Q.Bert |
|
Ortofon D 25 M Mono Cartridge Spherical Diamond
OM D 25 M Technical Data:
Output voltage at 1000 Hz, 5cm/sec.: 4 mV, Lateral (mono)
Channel balance at 1 kHz
Channel separation at 1 kHz
Channel separation at 15 kHz
Frequency range: 20-20.000 Hz
Frequency response: 20-18.000 Hz +3 / - 2 dB
FIM distortion at recommended tracking force, DIN 45.542:
Tracking ability at 315Hz at recommended tracking force: > 70 µm
Compliance, dynamic, lateral: 7 µm / mN
Stylus type: Spherical
Stylus tip radius: R 25 µm
Equivalent stylus tip mass: 0,5 mg
Tracking force range: 2,0-3,0 g (20-30 mN)
Tracking force, recommended: 2,5 g (25 mN)
Tracking angle: 20°
Internal impedance, DC resistance: 750 Ohm
Internal inductance: 450 mH
Recommended load resistance: 47 kOhm
Recommended load capacitance: 200-600 pF
Cartridge colour, body/stylus: Black/Black
Cartridge weight: 5 g
Replacement stylus unit: Stylus D 25 M
|
|
The versatile M92E fits both of the major types of tone-arm mounts in use today. This high-value model offers faithful sound reproduction at a very attractive price. A natural bi-radial diamond tip teamed with a tubular aluminum alloy stylus cantilever accurately traces the grooves of your records for a difference you can hear. Fits both of the major types of tonearm mounts in use today, making it compatible with over 85% of turntables. Biradial Diamond Tip + Tubular Aluminum Alloy Stylus Cantilever. Accurately traces the grooves of your records for smooth sound throughout the frequency range. Universal mount Biradial diamond tip Tubular aluminum alloy stylus cantilever Standard mount adapter Mounting hardware Stylus guard Low Tracking Force Minimizes wear on your irreplaceable vinyl collection
Shure M92E Excellent high-value cartridge with smooth sound. Fits turntables with P-mount tone arms or standard ½ inch mount tone arms.
- Type: MM
- Fixing: P-mount
- Output voltage: 5,0mV bei 1kHz, 5cm/sec.
- Amplifier-connection: Phono MM
- Frequency range: 20-18.000Hz
- Material: diamond, bonded
- Stylus type: elliptical 0.4 x 0.7 mil
- Tracking force range: 0,75-1,5g
- Tracking force, recommended: 1,25g
- Recommended load resistance: 47 kOhm
- Recommended load capacitance: 200-300pF
- Weight: 7,3g*
| The MC 3 Turbo takes high output moving coil (MC) cartridges a step further, with a high polished, nude fine line diamond. The MC 3 Turbo has a 3.3mV output, which is perfect for use with virtually any moving magnet (MM) phono preamps, included inbuilt models. The nude fine line diamond resolves a high level of detail and provides expansive stereo imaging.
Technical data |
|
Output voltage at 1000 Hz, 5cm/sec. |
3,3 mV |
Channel balance at 1 kHz |
|
Channel separation at 1 kHz |
> 24 dB |
Channel separation at 15 kHz |
>15 dB |
Frequency range at - 3dB |
20-30.000 Hz |
Frequency response FIM distortion at recommended |
20-20.000 Hz + 4 / - 1 dB |
Tracking ability at 315Hz at recommended tracking force *) |
> 70 µm |
Compliance, dynamic, lateral |
13 µm/mN |
Stylus type |
Nude Fine Line |
Stylus tip radius |
r/R 8/40 µm |
Tracking force range |
1,8-2,2 g (18-22 mN) |
Tracking force, recommended |
2 g (20 mN) |
Tracking angle |
20° |
Internal impedance, DC resistance |
100 Ohm |
Recommended load impedance |
47 kOhm / |
Cartridge body material |
Noryl |
Cartridge colour |
Black |
Cartridge weight |
4,1 g |
|
Reviews
There are no reviews yet.