| Content |
The Pro Series of cardrigdes create a great balance of sound quality with tracking ability, for virtually any style of music. With flat transparant sound accros the spectrum and excellent handling ability, the pro series represent one of the longest running values in DJ cardridges.
This Ortofon Concorde Set contains;
- 2 x Ortofon Concorde Pro Silver Element + stylus
- Ortofon Needle Brush
- All parts come in a special box casing
Features:
- Output Voltage at 1000Hz, 5cm/sec. : 5mV
- Channel Balance at 1 Khz : 1,5dB
- Channel Seperation at 1 Khz : 20dB
- Channel Seperation at 15 Khz : 15dB
- Frequency Range at 3db : 20-20.000Hz
- Stylus Type : Spherical
- Internal Impedance : 750 Ohm
- Tracking Force recommended : 4,0G(40mN)
- Cardridge Weight : 18,5 gram
- Replacement Stylus Unit : Pro
|
|
The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM). With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well. DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.
|
Output voltage at 1000Hz, 5cm/sec.
|
8 mV
| |
Channel balance at 1kHz
|
1,5 dB
| |
Channel separation at 1kHz
|
22 dB
| |
Channel separation at 15 kHz
|
15 dB
| |
Frequency range at -3dB
|
20-20.000 Hz
| |
Frequency response
|
20-20.000 Hz +/- 1,5 dB
| |
Tracking ability at 315 Hz at recommmende tracking force
|
90 μm
| |
Compliance, dynamic lateral
|
12 μm/m N
| |
Stylus type
|
Spherical
| |
Stylus tip radius
|
-
| |
Tracking force range
|
2,0-4,0 g (20-40 mN)
| |
Tracking force recommended
|
3,0 g (30 mN)
| |
Tracking angle
| -
| |
Internal impedance, DC resistance
|
-
| |
Internal inductance
|
-
| |
Recommended load resistance
|
-
| |
Recommended load capacitance
|
-
| |
Cartridge weight
|
5 g
| |
Replacement stylus unit
| Digitrak |
|
For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.
|
Output voltage at 1000Hz, 5cm/sec.
|
7 mV
| |
Channel balance at 1kHz
|
1,5 dB
| |
Channel separation at 1kHz
|
25 dB
| |
Channel separation at 15 kHz
|
15 dB
| |
Frequency range at -3dB
|
20-20.000 Hz
| |
Frequency response
|
20-15.000 Hz 3dB/-2dB
| |
Tracking ability at 315 Hz at recommmende tracking force
|
80 μm
| |
Compliance, dynamic lateral
|
6 μm/m N
| |
Stylus type
|
Spherical
| |
Stylus tip radius
|
R 18 μm
| |
Tracking force range
|
3,0-5,0 g (30-50 mN)
| |
Tracking force recommended
|
4,0 g (40 mN)
| |
Tracking angle
|
20°
| |
Internal impedance, DC resistance
|
750 Ohm
| |
Internal inductance
|
450 mH
| |
Recommended load resistance
|
47 kOhm
| |
Recommended load capacitance
|
200-600 pF
| |
Cartridge weight
|
18,5 g
| |
Replacement stylus unit
| Scratch |
|
Features
• 1 System
• 1 Replacement Stylus
• Small brush
• Inside a velvet-case
Technical Data
Output voltage at 1000 Hz: 5cm/sec. 7,5 mV
Frequency response: 20-15.000 Hz +3 / -2 dB
Stylus type: Spherical
Tracking force range: 3,0-5,0 g (30-50 mN)
Tracking force, recommended: 4,0 g (40 mN)
Cartridge weight: 5 g | THE CARL COX SIGNATURE MODEL, OPTIMIZED FOR DANCE MUSIC DJ PERFORMANCE.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 32dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: club and mobile DJs, high output | The MC 1 Turbo is an excellent entry into the world of high output moving coil (MC) cartridges, with an elliptical stylus profile. The MC 1 Turbo has a 3.3mV output, which makes it perfect for use with inbuilt phono preamps – specifically ones designed for moving magnet (MM) cartridges. The MC 1 Turbo provides a taste of the linearity and precision of moving coils, but without the need for additional high gain preamps or transformers.
| Technical data |
|
| Output voltage at 1000 Hz, 5cm/sec. |
3,3 mV |
| Channel balance at 1 kHz |
|
| Channel separation at 1 kHz |
> 22 dB |
| Channel separation at 15 kHz |
> 15 dB |
| Frequency range at - 3dB |
20-25.000 Hz |
| Frequency response FIM distortion at recommended |
20-20.000 Hz + 4 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
> 65 µm |
| Compliance, dynamic, lateral |
13 µm/mN |
| Stylus type |
Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Tracking force range |
1,8-2,2 g (18-22 mN) |
| Tracking force, recommended |
2 g (20 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
100 Ohm |
| Recommended load impedance |
47 kOhm / |
| Cartridge body material |
Noryl |
| Cartridge colour |
Black |
| Cartridge weight |
4,1 g |
|
Reviews
There are no reviews yet.