| Content |
DJ`s all over the world claim very high demands to their professional equipment, among which the cartridges ``plays` their decisive part by realising the scratching, back-cueing, and live artistic performance, as a big part of the show. Reliability and robustness is vital, when the cartridges night after night will have to withstand these demands in environments with extreme soundpressure and vibration.
Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon disco cartridges are equipped with cantilevers made from aluminium tube with increased wall thickness. Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will neither damage the cartridge nor degrade its stability.
The OrtofonPro cartridges were the first to combine the unrivalled Ortofon sound quality with the ruggedness that is a must for professional use.
Features
Output voltage at 1000 Hz, 5cm/sec. - 6 mV Channel balance at 1 kHz - 2 dB Channel separation at 1 kHz - 23 dB Channel separation at 15 kHz - 15 dB Frequency range - 20-20.000 Hz Frequency response - 20-18.000 Hz + 3 / - 2 dB FIM distortion at recommended - tracking force, DIN 45.542 - Stylus type - Spherical Equivalent stylus tip mass - 0,6 mg Tracking force range - 2,0-4,0 g (20-40 mN) Tracking force, recommended - 3,0 g (30 mN) Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-600 pF Cartridge colour, body/stylus - Blue/Blue Cartridge weight - 5 g
|
A revolutionary new high performance cart for DJs! Exceptional tracking ability of 120 μm!
The Ortofon-Serato S-120 represents a completely new way of constructing and designing cartridges. Its breakthrough patent pending technology has been designed to provide maximum freedom for DJ performance.
An innovative technology, called asymmetric suspension, takes the cartridge performance to the next level.
Its superior tracking force ensures the S-120 stays in the groove even under extreme live performance conditions.
In addition, its design achieves an unprecedentedly low level of record wear, which helps protect your valuable vinyl. On top of this, the S-120 is capable of providing a level of sound quality never thought possible from a modern DJ cartridge.
|
Output voltage at 1000Hz, 5cm/sec.
|
10 mV
| |
Channel balance at 1kHz
|
1,5 dB
| |
Channel separation at 1kHz
|
20 dB
| |
Channel separation at 15 kHz
|
15 dB
| |
Frequency range at -3dB
|
20-18.000 Hz
| |
Frequency response
|
20-18.000 Hz +3/- 2dB
| |
FIM distortion at recommended tracking force DIN 45.542
| | |
Tracking ability at 315 Hz at recommended tracking force
|
120 μm
| |
Compliance, dynamic lateral
|
11 μm/m N
| |
Stylus type
|
Spherical
| |
Stylus tip radius
|
R 18 μm
| |
Tracking force range
|
1,5-10,0 g (15-100 mN)
| |
Tracking force recommended
|
4,0 g (40 mN)
| |
Internal impedance, DC resistance
|
1680 Ohm
| |
Internal inductance
|
920 mH
| |
Recommended load resistance
|
47 kOhm
| |
Recommended load capacitance
|
200-600 pF
| |
Cartridge weight
|
5 g
| |
Replacement stylus unit
| Ortofon-Serato S-120 |
|
Features
• 1 System
• 1 Replacement Stylus
• Small brush
• Inside a velvet-case
Technical Data
Output voltage at 1000 Hz: 5cm/sec. 7,5 mV
Frequency response: 20-15.000 Hz +3 / -2 dB
Stylus type: Spherical
Tracking force range: 3,0-5,0 g (30-50 mN)
Tracking force, recommended: 4,0 g (40 mN)
Cartridge weight: 5 g | The MC 3 Turbo takes high output moving coil (MC) cartridges a step further, with a high polished, nude fine line diamond. The MC 3 Turbo has a 3.3mV output, which is perfect for use with virtually any moving magnet (MM) phono preamps, included inbuilt models. The nude fine line diamond resolves a high level of detail and provides expansive stereo imaging.
| Technical data |
|
| Output voltage at 1000 Hz, 5cm/sec. |
3,3 mV |
| Channel balance at 1 kHz |
|
| Channel separation at 1 kHz |
> 24 dB |
| Channel separation at 15 kHz |
>15 dB |
| Frequency range at - 3dB |
20-30.000 Hz |
| Frequency response FIM distortion at recommended |
20-20.000 Hz + 4 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
> 70 µm |
| Compliance, dynamic, lateral |
13 µm/mN |
| Stylus type |
Nude Fine Line |
| Stylus tip radius |
r/R 8/40 µm |
| Tracking force range |
1,8-2,2 g (18-22 mN) |
| Tracking force, recommended |
2 g (20 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
100 Ohm |
| Recommended load impedance |
47 kOhm / |
| Cartridge body material |
Noryl |
| Cartridge colour |
Black |
| Cartridge weight |
4,1 g |
|
Type: MC-type
Playback frequency range: 15-50,000Hz
Output voltage: 0.3mV (1kHz and 3.54cm/sec.)
Channel separation: 30dB (1kHz)
Output balance: 0.5dB (1kHz)
Stylus pressure: 1.8-2.2g (2.0g standard)
Coil impedance: 10O (1kHz)
DC resistance: 10O
Load resistance: More than 100O (when head amp connected)
Coil inductance: 22µH (1kHz)
Static compliance: 40×10-6cm/dyne
Dynamic compliance: 10×10-6cm/dyne (100Hz)
Stylus needle shape: Oval (0.3×0.7mil)
Cantilever: Duralumin tapered pipe
Vertical tracking angle: 23°
Dimensions: H16×W16.6×D26.5mm
Weight: 6.9g
Accessories: Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1
| THE CARL COX SIGNATURE MODEL, OPTIMIZED FOR DANCE MUSIC DJ PERFORMANCE.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 32dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: club and mobile DJs, high output |
Reviews
There are no reviews yet.