ORTOFON QBERT REPLACEMENT STYLUS

49.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: Q.Bert Stylus Category:
Provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. The Ortofon Qbert Stylus is considered by some to be the ‘perfect needle’, it ensures perfect reproduction of sound without wear on your vinyl. Replacement stylus to be used in Ortofon Qbert OM and Concorde […]

 

Read more

Provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. The Ortofon Qbert Stylus is considered by some to be the ‘perfect needle’, it ensures perfect reproduction of sound without wear on your vinyl.

Replacement stylus to be used in Ortofon Qbert OM and Concorde cartridges. Provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. The Ortofon Qbert Stylus is considered by some to be the ‘perfect needle’, it ensures perfect reproduction of sound without wear on your vinyl.

Ortofon Qbert Concorde Cartridge Specifications:Frequency response: 20 to 20.000 Hz
Output: 11mV
Channel separation nominal: 22dB
Inductance: 920mH/ch
Weight: 18.5g
Tracking force: 3 grams
Recommended load: 47K ohms 200pf
Stylus tip: Spherical

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “ORTOFON QBERT REPLACEMENT STYLUS”

Your email address will not be published. Required fields are marked *

Quick Comparison

ORTOFON QBERT REPLACEMENT STYLUS removeORTOFON 2M Black STYLUS Nude Shibata Type removeORTOFON STYLUS DJ E Needle removeORTOFON 5E REPLACEMENT STYLUS removeORTOFON 510 MKII STYLUS removeORTOFON 2M RED REPLACEMENT STYLUS Elliptical Type remove
NameORTOFON QBERT REPLACEMENT STYLUS removeORTOFON 2M Black STYLUS Nude Shibata Type removeORTOFON STYLUS DJ E Needle removeORTOFON 5E REPLACEMENT STYLUS removeORTOFON 510 MKII STYLUS removeORTOFON 2M RED REPLACEMENT STYLUS Elliptical Type remove
Image
SKUQ.Bert StylusST2MBlackSTYLUS DJ E5E510MKIIST2MRED
Rating
Price 49.00 incl. GR VAT425.00 incl. GR VAT 58.00 incl. GR VAT54.99 incl. GR VAT59.00 incl. GR VAT86.79 incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 4 left in stock (can be backordered)

Available on backorder

Out of stock

In stock

AvailabilityAvailable on backorderAvailable on backorderOnly 4 left in stock (can be backordered)Available on backorderOut of stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Read more

Add to cart

Description
ContentProvides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. The Ortofon Qbert Stylus is considered by some to be the 'perfect needle', it ensures perfect reproduction of sound without wear on your vinyl. Replacement stylus to be used in Ortofon Qbert OM and Concorde cartridges. Provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. The Ortofon Qbert Stylus is considered by some to be the 'perfect needle', it ensures perfect reproduction of sound without wear on your vinyl. Ortofon Qbert Concorde Cartridge Specifications:Frequency response: 20 to 20.000 Hz Output: 11mV Channel separation nominal: 22dB Inductance: 920mH/ch Weight: 18.5g Tracking force: 3 grams Recommended load: 47K ohms 200pf Stylus tip: SphericalStylus 2M Black
Technical data
Frequency range 20-31.000 Hz
Frequency response 20-20.000 Hz + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force *) 80 µm
Compliance, dynamic, lateral 22 µm/mN
Stylus type Nude Shibata
Stylus tip radius r/R 6/50 µm
Tracking force range 1,4-1,7 g (14-17 mN)
Tracking force, recommended 1,5 g (15 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges 2M Black
*) Typical value
DJ E Replacement stylus Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever Features Special Elliptical stylus and a special developed and extremely balanced cantilever. Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied. DJ E Stylus Technical data Output voltage at 1000Hz, 5cm/sec. -   6 mV Channel balance at 1kHz  -  2 dB Channel separation at 1kHz  -  23 dB Channel separation at 15 kHz  -  15 dB Frequency range at -3dB  -  20-22.000 Hz Frequency response -   20-20.000 Hz +/-2 dB Tracking ability at 315 Hz at recommmende tracking force  -  80 μm Compliance, dynamic lateral  -  9 μm/m N Stylus type  -  Special Elliptical Stylus tip radius  -  r/R 13/25 μm Tracking force range  -  2,0-4,0 g (20-40 mN) Tracking force recommended  -  3,0 g (30 mN) Tracking angle -   20° Internal impedance, DC resistance  -  750 Ohm Internal inductance  -  450 mH Recommended load resistance   - 47 kOhm Recommended load capacitance -  200-600 pF Cartridge weight  -  18,5 g Compatible with cartridges -  DJ SStylus 5E
Technical data
Frequency range 20-25.000 Hz
Frequency response 20-25.000 Hz
Tracking ability at 315Hz at recommended tracking force *)
Ortofon 510MKII Stylus Technical Data
  • Frequency range20-23.000 Hz
  • Frequency response20-20.000 Hz + 2 / - 3 dB
  • Tracking ability at 315Hz at recommended tracking force70 µm
  • Compliance, dynamic, lateral25 µm/mN
  • Stylus typeElliptical
  • Stylus tip radiusr/R 8/18 µm
  • Equivalent stylus tip mass0,3 mg
  • Tracking force range1,25-1,75 g (12,5-17,5 mN)
  • Tracking force, recommended1,5 g (15 mN)
  • Tracking angle20°
  • Stylus colourBlack
  • Recommended for following cartridgesSeries 510 Mkll, 510, 510 P
Stylus 2M Red
Technical data
Frequency range 20-22.000 Hz
Frequency response 20-20.000 Hz + 3 / - 1 dB
Tracking ability at 315Hz at recommended tracking force *) 70 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Equivalent stylus tip mass 0,5 mg
Tracking force range 1,6-2,0 g (16-20 mN)
Tracking force, recommended 1,8 g (18 mN)
Tracking angle 20°
Stylus colour Red
Recommended for following cartridges 2M Red
*) Typical value
Weight0.10 kg0.20 kg0.30 kg0.20 kg0.20 kg0.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.20 kg
Weight 0.30 kg
Weight 0.20 kg
Weight 0.20 kg
Weight 0.20 kg