ORTOFON STYLUS DJ E Needle

50.84 incl. GR VAT

In stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
DJ E Replacement stylus Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever Features Special Elliptical stylus and a special developed and extremely balanced cantilever. Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very […]

 

Read more

DJ E Replacement stylus

Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever

Features Special Elliptical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.  

The DJ series has been known to many as the “jack of all trades,” with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied. 

DJ E Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. –   6 mV
Channel balance at 1kHz  –  2 dB
Channel separation at 1kHz  –  23 dB
Channel separation at 15 kHz  –  15 dB
Frequency range at -3dB  –  20-22.000 Hz
Frequency response –   20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force  –  80 μm
Compliance, dynamic lateral  –  9 μm/m N
Stylus type  –  Special Elliptical
Stylus tip radius  –  r/R 13/25 μm

Tracking force range  –  2,0-4,0 g (20-40 mN)
Tracking force recommended  –  3,0 g (30 mN)
Tracking angle –   20°
Internal impedance, DC resistance  –  750 Ohm
Internal inductance  –  450 mH
Recommended load resistance   – 47 kOhm
Recommended load capacitance –  200-600 pF
Cartridge weight  –  18,5 g

Compatible with cartridges –  DJ S

Weight 0.30 kg

Reviews

There are no reviews yet.

Be the first to review “ORTOFON STYLUS DJ E Needle”

Your email address will not be published. Required fields are marked *

Quick Comparison

ORTOFON STYLUS DJ E Needle removeORTOFON 5S REPLACEMENT STYLUS removeORTOFON DJ S STYLUS removeORTOFON STYLUS 530MKII removeORTOFON 305 REPLACEMENT STYLUS removeDUAL DN149S HI-FI STYLUS Needle by Ortofon remove
NameORTOFON STYLUS DJ E Needle removeORTOFON 5S REPLACEMENT STYLUS removeORTOFON DJ S STYLUS removeORTOFON STYLUS 530MKII removeORTOFON 305 REPLACEMENT STYLUS removeDUAL DN149S HI-FI STYLUS Needle by Ortofon remove
Image
SKUSTYLUS DJ ESTYLUS5 SSTYLUS DJ S530MKIIORT305STDN149S
Rating
Price 50.84 incl. GR VAT52.00 incl. GR VAT48.99 incl. GR VAT249.00 incl. GR VAT49.00 incl. GR VAT 55.79 incl. GR VAT
Stock

In stock (can be backordered)

Available on backorder

In stock (can be backordered)

Available on backorder

Available on backorder

In stock (can be backordered)

AvailabilityIn stock (can be backordered)Available on backorderIn stock (can be backordered)Available on backorderAvailable on backorderIn stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

DJ E Replacement stylus

Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever

Features Special Elliptical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.  

The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied. 

DJ E Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. -   6 mV
Channel balance at 1kHz  -  2 dB
Channel separation at 1kHz  -  23 dB
Channel separation at 15 kHz  -  15 dB
Frequency range at -3dB  -  20-22.000 Hz
Frequency response -   20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force  -  80 μm
Compliance, dynamic lateral  -  9 μm/m N
Stylus type  -  Special Elliptical
Stylus tip radius  -  r/R 13/25 μm

Tracking force range  -  2,0-4,0 g (20-40 mN)
Tracking force recommended  -  3,0 g (30 mN)
Tracking angle -   20°
Internal impedance, DC resistance  -  750 Ohm
Internal inductance  -  450 mH
Recommended load resistance   - 47 kOhm
Recommended load capacitance -  200-600 pF
Cartridge weight  -  18,5 g

Compatible with cartridges -  DJ S

Stylus 5 Spherical

Technical data
Frequency range 20-20.000 Hz
Frequency response

20-15.000 Hz ± 2 dB

Tracking ability at 315Hz at recommended tracking force *) 60 µm
Compliance, dynamic, lateral 15 µm/mN
Stylus type spherical
Stylus tip radius R/18 µm
Equivalent stylus tip mass 0,5 mg
Tracking force range

1,75-2,25 g (17,5-22,5 mN)

Tracking force, recommended

2 g (20 mN)

Tracking angle 20°
Stylus colour Black
OM 5,OMB 5, LMA 5, SMB 5

*) Typical value

DJ S Replacement stylus DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity. Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied. The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world! DJ S Stylus Technical data Output voltage at 1000Hz, 5cm/sec.  - 6 mV Channel balance at 1kHz  - 2 dB Channel separation at 1kHz  - 23 dB Channel separation at 15 kHz  - 15 dB Frequency range at -3dB  - 20-20.000 Hz Frequency response  - 20-18.000 Hz 3dB/-2dB Tracking ability at 315 Hz at recommmende tracking force  - 80 μm Compliance, dynamic lateral -  9 μm/m N Stylus type  - Spherical Stylus tip radius  -  R 18 μm Tracking force range  - 2,0-4,0 g (20-40 mN) Tracking force recommended -  3,0 g (30 mN) Tracking angle -  20° Internal impedance, DC resistance -  750 Ohm Internal inductance  - 450 mH Recommended load resistance  - 47 kOhm Recommended load capacitance  - 200-600 pF Cartridge weight  - 18,5 g Compatible with cartridges -  DJ S

Ortofon 530MKII Stylus Technical Data

  • Frequency range 20-25.000 Hz
  • Frequency response 20-20.000 Hz + 2 / - 3 dB
  • Tracking ability at 315Hz at recommended tracking force 80 µm
  • Compliance, dynamic, lateral 30 µm/mN
  • Stylus type Nude Fine Line
  • Stylus tip radius r/R 8/40 µm
  • Equivalent stylus tip mass 0,3 mg
  • Tracking force range 1,25-1,75 g (12,5-17,5 mN)
  • Tracking force, recommended 1,75 g (17,5 mN)
  • Tracking angle 20°
  • Stylus colour Black
  • Recommended for following cartridges Series 530 Mkll, 530, 530 P
  • Stylus 305
    Technical data
    Frequency range 20-20.000 Hz
    Frequency response 20-18.000 Hz + 2 / - 3 dB
    Tracking ability at 315Hz at recommended tracking force *) 60 µm
    Compliance, dynamic, lateral 20 µm/mN
    Stylus type spherical
    Stylus tip radius r/R 8/18 µm
    Equivalent stylus tip mass 0,5 mg
    Tracking force range 1,5-2,0 g (12,5-20 mN)
    Tracking force, recommended 1,5 g (15 mN)
    Tracking angle 20°
    Stylus colour Grey
    Recommended for following cartridges Series 305 Universal
    *) Typical value
    Technical data Frequency range 20-20.000 Hz Frequency response 20-15.000 Hz + 2 / - 3 dB Tracking ability at 315Hz at recommended tracking force *) 60 µm Compliance, dynamic, lateral 15 µm/mN Stylus type spherical Stylus tip radius r/R 8/18 µm Equivalent stylus tip mass 0,5 mg Tracking force range 1,25-2,25 g (17,5-22,5 mN) Tracking force, recommended 2,0 g (20 mN) Tracking angle 20° Stylus colour Black Recommended for following cartridges - Dual TKS 49 S *) Typical value
    Weight0.30 kg0.10 kg0.30 kg0.20 kg0.05 kg0.20 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.30 kg
    Weight 0.10 kg
    Weight 0.30 kg
    Weight 0.20 kg
    Weight 0.05 kg
    Weight 0.20 kg