| Content |
Palmer cabinets are rugged, flexible and affordable guitar cabinets. The main features are:
- Front-mounted speakers
- Detachable grill
- Solid workmanship
- Speaker mount and quality check carried out in Germany
- Cabinet impedance (mono): 8 ohms
- Power Rating (mono): 150 W
- Cabinet weight without speakers: 12 kg
- Back: Open
- Dimensions (W x D x H): 58 x 29 x 45 cm
- Front Grill: detachable
- Speaker Mounting: 1x12" front mounted
Texas Heat™
Coloration : Nice warm, fat tone with a little top end bite and clarity. Very touch-sensitive with a hint of British flavor
Genre : American Rock, Blues, and Southern Rock
SPECIFICATION
- Nominal Basket Diameter 12“, 304.8 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 150 W / Music Program N/A
- Resonance 79 Hz
- Usable Frequency Range 70 Hz - 5 kHz
- Sensitivity 99
- Magnet Weight 38 oz.
- Gap Height 0.312“, 7.92 mm
- Voice Coil Diameter 2“, 50.8 mm
| Marshall 1960TV 100W 4x12'' Guitar Speaker Cabinet
Invest in that fat sound!
The Marshall 1960TV Cabinet has an angled front; 4 - 12" Greenback speakers; and a warmer, thicker sound than the 1960A. This 100W, mono, 16-ohm cabinet is 3 inches taller than a standard 1960A 4x12 cabinet which results in well defined mid range and a lowered resonant frequency for more prominent lows. The 25W Greenbacks are less in your face than the 75W Celestions in the 1960A. Although not a reissue it was never offered in the past this cab recreates the classic look and tones of yesteryear.
Marshall 1960TV Cabinet Features:
- Angled front
- 4 - 12" 25W Greenback speakers for warmer, thicker sound than the 1960A
- Original grille cloth
- 3" taller than standard 4x12 cabs
Marshall 1960TV Cabinet Specifications:
- Handles 100W
- 16 ohms
- 29-3/5“W x 35-1/2“H x 14-4/5“D
- 44 kgs.
| Palmer cabinets are rugged, flexible and affordable guitar cabinets. The main features are:
- Front-mounted speakers
- Detachable grill
- Solid workmanship
- Speaker mount and quality check carried out in Germany
- Cabinet impedance (Mono): 8
- Cabinet impedance (Stereo): 16/Speaker
- Power Rating (Mono): 120 W
- Power Rating (Stereo): 60/Speaker
- Cabinet weight without speakers: 15,6 kg
- Back: Closed
- Dimensions (WxDxH): 48x71x29 cm
- Front Grill: Fabric, detachable
- Speaker Mounting: 2 x 12" front mounted
Vintage 30
Back in 1986 a new breed of hard rock player was on the rise. To meet the demands of the players and their increasingly ʽhot-roddedʼ amplifiers, we set out to develop a modern speaker, capable of handling much more power and overdrive. To achieve this, we coupled our ʽHʼ magnet (the closest in performance to Alnico) with a new cone and voice coil employing contemporary materials.
Our most revealing speaker, the Vintage 30 features enormously detailed and complex overtones, a warm low-end, a famously rich vocal mid-range and a beautifully detailed top-end. Used singly to reveal the complexities in hand-wired boutique amps, or in quartets for a wonderfully intricate vintage 3D crunch, the Vintage 30 sound has been captured on thousands of recordings from a diverse range of notable players including Slash, Steve Stevens and Peter Frampton.
Specifications
- Nominal diameter: 12“, 305 mm
- Power Rating: 60 W
- Nominal impedance: 8 ohms
- Sensitivity: 100 dB
- Chassis type: Pressed steel
- Voice coil diameter: 1,75“, 44,5 mm
- Voice coil material: Round copper
- Magnet type: Ceramic
- Magnet weight: 50 oz, 1,42 kg
- Frequency range: 70 - 5000 Hz
- Resonance frequency, Fs: 75 Hz
- DC resistance, Re: 7,3 ohms
| Info
150W 2x12" Mono / 75W + 75W Stereo Cabinet. | Hand Soldered, 120 Watt 4x12 Straight Front
To complement the 1959HW's visual sonic majesty we offer the 1960AHW (angled) and 1960BHW (straight) 4x12" cabinets that boast Basket Weave fret cloth, metal handles, "100" logos and are loaded with Celestion's highly-acclaimed G12H-30 re-issue speakers.
The 1960AHW and 1960BHW Cabinets match the 1959HW heads perfectly. Both are 120 Watt, 16 Ohm mono 4x12" cabinets featuring salt-n-pepper grille cloth, metal handles, and loaded with the bass version of Celestion's reissue of the G12H30 speaker.
The timeless tone of vintage handwired, all-tube Marshall amplifiers have made them highly desirable to collectors and sonic connoisseurs alike. Due to overwhelming public demand, Marshall is proud to introduce meticulous, handwired re-issues of three of their most sought-after amplifiers as the first products in our brand new Handwired Series – a Series that celebrates the company's rich tonal heritage and revisits the handcrafted traditions and skills that first launched the Marshall legend.
Marshall 1960BHW Specifications:
- Cabinet Type: Base (straight, flat front)
- Speaker Type: G12H-30
- Speaker Configuration: 4 x 12 inches
- Power (RMS): 120 Watts
- Impedance: 16 Ohms
- Dimensions (mm): 760 x 830 x 360 (approx. 30 x 33 x 14.2 inches)
- Weight (kg): 36.4 (approx. 80 lbs.)
| Info
The lower cost MX212, 2 x 12'' cab can be used with most Marshall heads, or as an extension cab for a 2 x 12'' combo, which adds great flexibility to your setup. This mono cab, covered in Marshall Tolex, featuring the iconic Marshall baffle logo is loaded with Celestion Seventy 80 speakers. |
Reviews
There are no reviews yet.