| Content |
Palmer cabinets are rugged, flexible and affordable guitar cabinets. The main features are:
- Front-mounted speakers
- Detachable grill
- Solid workmanship
- Speaker mount and quality check carried out in Germany
- Cabinet impedance (mono): 8 ohms
- Power Rating (mono): 60 W
- Cabinet weight without speakers: 12 kg
- Back: Open
- Dimensions (W x D x H): 58 x 29 x 45 cm
- Front Grill: detachable
- Speaker Mounting: 1x12" front mounted
Vintage 30
Back in 1986 a new breed of hard rock player was on the rise. To meet the demands of the players and their increasingly "hot-rodded" amplifiers, we set out to develop a modern speaker, capable of handling much more power and overdrive. To achieve this, we coupled our ʽHʼ magnet (the closest in performance to Alnico) with a new cone and voice coil employing contemporary materials.
Specifications - Nominal diameter: 12“, 305 mm
- Power Rating: 60 W
- Nominal impedance: 8 ohms
- Sensitivity: 100 dB
- Chassis type: Pressed steel
- Voice coil diameter: 1,75“, 44,5 mm
- Voice coil material: Round copper
- Magnet type: Ceramic
- Magnet weight: 50 oz, 1,42 kg
- Frequency range: 70 - 5000 Hz
- Resonance frequency, Fs: 75 Hz
| Palmer cabinets are rugged, flexible and affordable guitar cabinets. The main features are:
- Front-mounted speakers
- Detachable grill
- Solid workmanship
- Speaker mount and quality check carried out in Germany
- Cabinet impedance (Mono): 8
- Cabinet impedance (Stereo): 16/Speaker
- Power Rating (Mono): 120 W
- Power Rating (Stereo): 60/Speaker
- Cabinet weight without speakers: 15,6 kg
- Back: Closed
- Dimensions (WxDxH): 48x71x29 cm
- Front Grill: Fabric, detachable
- Speaker Mounting: 2 x 12" front mounted
Vintage 30
Back in 1986 a new breed of hard rock player was on the rise. To meet the demands of the players and their increasingly ʽhot-roddedʼ amplifiers, we set out to develop a modern speaker, capable of handling much more power and overdrive. To achieve this, we coupled our ʽHʼ magnet (the closest in performance to Alnico) with a new cone and voice coil employing contemporary materials.
Our most revealing speaker, the Vintage 30 features enormously detailed and complex overtones, a warm low-end, a famously rich vocal mid-range and a beautifully detailed top-end. Used singly to reveal the complexities in hand-wired boutique amps, or in quartets for a wonderfully intricate vintage 3D crunch, the Vintage 30 sound has been captured on thousands of recordings from a diverse range of notable players including Slash, Steve Stevens and Peter Frampton.
Specifications
- Nominal diameter: 12“, 305 mm
- Power Rating: 60 W
- Nominal impedance: 8 ohms
- Sensitivity: 100 dB
- Chassis type: Pressed steel
- Voice coil diameter: 1,75“, 44,5 mm
- Voice coil material: Round copper
- Magnet type: Ceramic
- Magnet weight: 50 oz, 1,42 kg
- Frequency range: 70 - 5000 Hz
- Resonance frequency, Fs: 75 Hz
- DC resistance, Re: 7,3 ohms
| 150 Watt, 2x12" Cabinet with Vintage and Heritage Speakers
The Marshall JVMC212 guitar extension cabinet is the perfect partner for any JVM combo or head.
The JVMC212 is designed using only the finest materials and constructed with tried and tested techniques the JVMC212 can output 150 Watts of power through its Marshall/Celestion Vintage and Hertige speakers.
The JVMC212 offers the optimum solution in 2x12" UK built cabinet quality. The JVMC212 is constructed from the finest Baltic birch plywood in the Marshall UK factory and hand covered in traditional and hard wearing Elephant grained vinyl covering. The JVMC is loaded with the finest mix of Celestion heritage and vintage speakers that facilitate the depth and tone guitarists search for, providing a 2x12 extension cabinet that feels larger than life in the way only Marshall know how. The JVMC is suitable for most amp heads.
Product Details:
- Output (RMS): 150 Watt
- Speakers: 1 x Heritage, 1 x Vintage
- Speaker Configuration: 2x12
- Impedance: 16 Ohm
- Dimensions (mm): 673 x 478 x 260
- Weight: 24kg
| Marshall 1960B at a Glance:
- Incredibly flexible 4x12 straight cab
- Well-Focused and Uncluttered Sound
- Offers that low-end thump.
- Sonically speaking, nothing compares to a Marshall amp
- Rugged and ready for the road
The Ultimate in Flexibility
To ensure the ultimate in flexibility, the 1960A (angled) and the 1960B (straight), is switchable between Mono (4 or 16 Ohms) and Stereo (8 Ohms per side). The two Mono impedance options provide extra amp matching capability while the cabinets' stereo capability makes them ideal for rack systems which typically run in stereo.
Clear and True
The 1960B produces a loud, well-focused and uncluttered sound with a tight, full low end and a crisp, clear top. It projects well across the guitar's entire tonal range and its clarity makes it ideal for players who like using a fair amount of effects such as reverb, chorus or delay as it doesn't "mask" or "muddy-up" such FX. Its all-around versatility and relatively "uncolored" nature makes this one of Marshall's best selling cab. It represents the sound of the guitar and head most accurately.
The Marshall 1960 cabinets are the best selling amp cabinets in the world and are standard on stages everywhere for their sound and rugged construction. While not complicated electronically, the effects of their materials, construction and speakers make the 1960s the choice of players everywhere and have made them the industry standard to this day.
Offers That Low-End Thump
B (Base) cabinets offer some sonic differences. A straight cab sounds more focused and has more low-end thump. The additional size gives the cabinet a lower resonant frequency for more low-end. All speakers facing the same direction gives a more focused sound. Many players prefer to use only the B cabs, even when they are on stage with a full stack. Zakk Wylde (Ozzy's guitarist) uses only the B cabs because of the tighter low end and because (believe it or not) he values his hearing and the sound from the B cab doesn't hit him directly in the head.
Sonically Superior
The only choice for serious musicians. Nothing compares to Marshall cabinets in terms of awesome tone and projection. Both visually and aurally, Marshall 4x12 cabs are indeed rock and roll history in a stack!
Ready For Your Gig - Wherever That Might Be!
Roadworthiness is a vital prerequisite in the world of relentless touring and as Marshall's 40 years of cabinet building attests, Marshall cabinets are definitely built to stand the test of time! Their highly skilled craftsmen construct these 4x12s from the finest materials available - 15mm birch plywood with precision 'finger locked' (comb) joints, tough cotton backed PVC covering, heavy duty hardware and the highest quality fittings.
Weighing in at around 80 lbs, the JCM1960B is made of 15mm birch plywood (except for the back panel, which is medium density fiberboard) and built for tone, projection, and durability. The majority of cabinet construction is done by hand.
Marshall 1960B Features:
- 300W 4x12 straight 4/16 ohm, mono- 8 ohm stereo.
- 4 x 75 Watt 'G12T-75' speakers (1960B/B).
- Black grille cloth / white piping
- Large white logo
- Black elephant grain vinyl
| Hand Soldered, 120 Watt 4x12 Straight Front
To complement the 1959HW's visual sonic majesty we offer the 1960AHW (angled) and 1960BHW (straight) 4x12" cabinets that boast Basket Weave fret cloth, metal handles, "100" logos and are loaded with Celestion's highly-acclaimed G12H-30 re-issue speakers.
The 1960AHW and 1960BHW Cabinets match the 1959HW heads perfectly. Both are 120 Watt, 16 Ohm mono 4x12" cabinets featuring salt-n-pepper grille cloth, metal handles, and loaded with the bass version of Celestion's reissue of the G12H30 speaker.
The timeless tone of vintage handwired, all-tube Marshall amplifiers have made them highly desirable to collectors and sonic connoisseurs alike. Due to overwhelming public demand, Marshall is proud to introduce meticulous, handwired re-issues of three of their most sought-after amplifiers as the first products in our brand new Handwired Series – a Series that celebrates the company's rich tonal heritage and revisits the handcrafted traditions and skills that first launched the Marshall legend.
Marshall 1960BHW Specifications:
- Cabinet Type: Base (straight, flat front)
- Speaker Type: G12H-30
- Speaker Configuration: 4 x 12 inches
- Power (RMS): 120 Watts
- Impedance: 16 Ohms
- Dimensions (mm): 760 x 830 x 360 (approx. 30 x 33 x 14.2 inches)
- Weight (kg): 36.4 (approx. 80 lbs.)
| Featuring two Celestion Vintage 30 speakers, the PPC212 is in essence our classic 4×12 slashed in half. The large internal volume of the sealed enclosure makes the PPC212 ideal for players looking for the the fattest possible tone when a 4×12″ would be too large. Many players choose to stack two PPC212 cabs for ease of load-in, also giving them the flexibility of using just one for smaller venues. Made in England from high density 13 ply 18mm Baltic birch plywood, the PPC212 is fitted with steel hardware to withstand the rigours of the road. Our unique skid runners fitted to the base helps to acoustically couple our cabinets to the stage for a fuller low end response.
| Power: |
120 Watts |
| Drivers: |
2 X 12? CELESTION VINTAGE 30 |
| Dimensions ( W x H x D ): |
53 X 78 X 38 cm |
| Weight: |
28 Kg |
|
Reviews
There are no reviews yet.