| Content |
User\'s manual
Palmer MI PWT 05 MK 2
Universal 9V Pedalboard Power Supply 5 Outputs
- Universal 9 volt DC power supply
- 5 outlets with ultra stable 250 mA each
- Isolated
- Overload protection
- Roadworthy enclosure
- Mounting and strain relief options
- Power, merge and daisy chain cables included
With a stable 250 mA on each of the five center negative barrel style outlets the compact Palmer PWT 05 MK2 is most suited to virtually any pedalboard size. To deliver clean DC power to your pedals and eliminate ground loops between them and the associated hum the outlets are isolated.
The PWT 05 MK2 is protected against overloading and comes with 25 and 50 cm long connection cables, as well as two Y-cables. The first one, with a black connector, connects two 9 V outputs to increase the current intensity to a massive 500 mA, the other one, with a white connector, connects two 9 V outputs to double the voltage to 18 V.. Also included is a 1-into-5 daisy chain that lets you power five pedals from one output if their total current draw does not exceed 250 mA. The rugged enclosure of the Palmer PWT 05 MK2 provides mounting and cable relief options while the IEC mains inlet and voltage selector enable worldwide use.
Product type
Power Supplies
Mains connector
IEC socket
Input voltage
230 V
Outputs
5
Output connectors
2.1 x 5.5 mm
Output voltage
9 V
Max. output current
each output 250 mA
Isolated outputs
yes
Polarity
center negative
Cord length
25 - 50 cm
Indicators
Overload , Power
Controls
mains switch (on/off) , voltage selector switch
Width
105 mm
Depth
140 mm
Height
45 mm
Weight
1,5 kg
| User\'s manual
Palmer MI PWT 12 MK 2
Universal 12-Outlet Pedalboard Power Supply
- Fully regulated universal pedalboard power supply
- 12 standard centre negative outlets with 2,000 mA output total
- 8 x 9 V outlets (300 mA each)
- 4 variable voltage outlets 6 to 18 V (500 mA each)
- Short circuit and overload protection for each outlet
- DC cables and mains adapter included
The PWT 12 is a heavy duty (2000 mA) universal pedal board power supply with 12 isolated 9 V DC, centre-negative female pin-connector outputs. Four of the outputs feature adjustable voltage from 6 to 18 volts. The variable outputs enable the simulation of voltage drop or \'battery sag\' in old batteries. The power supply is regulated for constant voltage supply and protected against short circuit and overloading. The PWT 12 is equipped with a power LED and a two-colour LED output status indicator. It is supplied with an AC adapter and a set of DC cables. The PWT 12 is the ideal solution for power-hungry foot pedals or 9-volt effects units that can be operated at higher voltages for increased dynamics and stability.
Product type
Power Supplies
Input voltage
100 - 250 V
Outputs
12
Output connectors
2.1 x 5.5 mm
Output voltage
12 V , 18 V , 9 V
Max. output current
2000 mA
Isolated outputs
yes
Polarity
center negative
Cord length
25 - 50 cm
Indicators
fault , Power
Controls
Output voltage selector
Width
193 mm
Depth
70 mm
Height
30 mm
Weight
0,4 kg
|
User\'s manual
Palmer MI PWT 08
Universal 9V Pedalboard Power Supply 8 Outputs
- Fully regulated universal pedalboard power supply
- 8 standard center negative outlets with 2,000 mA output total
- Two 9, 12 or 18 V switchable outputs
- Short circuit and overload protection for each outlet
- Bright power and outlet status LED indicators
- DC cables, Y cable and mains adapter included
The PWT 08 is a universal pedalboard power supply with huge 2,000 mA output capacity and 8 standard center negative outlets. Two of these are switchable to 9, 12 or 18 volts, and with the included Y cable they can be combined to a single outlet for 21, 24, 30 or 36 volts maximum output. They are isolated from each other and the remaining outlets. Featuring short circuit and overload protection, the PWT 08 is fully regulated to deliver constant voltage. The unit sports a power on LED, bi-color outlet status LEDs and comes with a set of DC cables and dedicated mains adapter. The PWT 08 is the ideal choice if you have just one or two power hungry pedals or 9 volt effects that can be run on higher DC currents for more dynamics and headroom.
Product type
Power Supplies
Mains connector
wall wart
Input voltage
100 - 250 V
Outputs
8
Output connectors
2.1 x 5.5 mm
Output voltage
12 V , 18 V , 9 V
Max. output current
2000 mA
Isolated outputs
yes
Polarity
center negative
Cord length
25 - 50 cm
Indicators
Fault , Power
Controls
Output voltage selector
Width
140 mm
Depth
80 mm
Height
32 mm
Weight
0,3 kg
Features
8 x DC cable, 1 x merge cable
| V19 - MICRO POWER SUPPLY
●Power up 8 multiple effects
●Avoid unwanted cable mess and noise
●Seven – 9V inputs/One – 18V input
●Flexible power configuration covers requirements of majority of pedals
●Eight individually regulated outputs
●Short circuit protection design for individual outputs
●Provides stable 9V DC & 18V power
9V DC Output maximum current of 300mA
18V DC Output maximum current of 150 mA
Connectors: ¼” Input jack, ¼” Output jack
Power: 9V DC, center (-)
Micro pedal package
Dimensions:
46 mm (W) x 94 mm (D) x 50 mm (H)
1.8 in (W) x 3.7 in (D) x 2.0 in (H)
Compact, rugged metal housing |
Input voltage DV 9V
Output Amps 300 mA
|
Power supply uniy for Fly 3 |
Reviews
There are no reviews yet.