Content |
The DDJ-SB2 takes you beyond control. Not only does it boast all popular features from the DDJ-SB, it also adds some amazing new pro-DJ functions.
Hitting the decks has never been easier and more intuitive - even for first-time DJs. This controller has been upgraded with 4-deck control and dedicated buttons to switch between channels effortlessly. Plus a trim knob and level meters to master the input volume, and Pad Trans beat effects will uplift your DJ skills in no time.
DDJ-SB2 Full Feature List: - USB powered
- Combo HP/LP filter for each channel.
- Hot Cue, Auto Loop, Manual Loop and Sampler modes
- Dedicated Serato software FX Control
- Single Mic Input (1/4” jack)
- Master RCA output
- Both 1/4” and 1/8” mini jack headphone outs
- Full MIDI Support with MIDI Out
- High resolution, touch sensitive jog wheels
- The popular Filter Fade control that adds two high pass filters to the crossfader
DDJ-SB2 vs DDJ-SB; New Features - A Brighter Display
- Improved Button Layout
- 4 Deck controls
- Pad Trans beat effect to cut volume of a track in time with the BPM using the performance pads
Pioneer DDJ-SB2 2 Channel Serato DJ Controller - Black
• Two channels allowing you to control two tracks, loops or samples at a time
• Master and two headphone outputs allowing you to connect speakers and headphones at the same time
• Microphone input allows you to add voice into the mix
• Ten on-board effects powered by iZotope
• Compatible with PC and Mac
• Serato DJ Intro software included
Special Feature
• Filter Fade function allows DJs to do more than just mix
What has been improved from the DDJ-SB?
The DDJ-SB2 not only boasts all of the popular features from the DDJ-SB but it also adds some amazing new pro-DJ features. The DDJ-SB2 features 4-deck control and dedicated buttons for switching between channels. The trim knob and level meters allow you to master the input levels. The Pad Trans beat effects will uplift your DJ skills in no time.
Channels and Controls
The DDJ-SB2 is a two channel DJ controller allowing you to control two tracks, loops or samples at the same time. Each channel features manual high/low pass filters. There are two large aluminium jog wheels which provide dynamic performance and great scratch response. On-board controls provide immediate access to play, cue, sync, shift, hot cue, auto loop, manual loop and sampler functions. A unique filter fade function allowing you to manipulate both volume and base filters with the use of the cross fader, adding effortless transitions to your mix.
What can I connect to my DDJ-SB2?
The DDJ-SB2 features a master output connection allowing for connection to an amplifier or powered speakers. There are two headphone channels with both 1/4" and 3.5mm sockets on each channel allowing you to monitor your mix and professionally manage loops and transitions. The DDJ-SB2 has a USB MIDI connector allowing it to be used as a MIDI controller.
Compatibility and Software
The DDJ-SB2 has been designed for plug-and-play control of the included Serato DJ Intro software allowing for quick installation and setups. The DDJ-SB2 is MIDI compatible with compatibility with a wide range of alternative DJ software, allowing you to choose from a diverse library of industry leading mixing software. The DDJ-SB2 is both PC and Mac compatible with support for 32 bit or 64 bit operating systems.
Specifications |
| Dimensions |
| Height | 58.5 mm | Width | 487 mm | Depth | 271.2 mm | Weight | 2100 g | Software System Requirements |
| Windows 7 (32 bit) | (CPU) 2.0 GHz Core 2 Duo, (Memory) 1GB | Windows 7 (64 bit) | (CPU) 2.4 GHz Core 2 Duo, (Memory) 1GB | Mac OS (32 bit) | (CPU) 2.0 GHz Core 2 Duo, (Memory) 1GB | Mac OS (64 bit) | (CPU) 2.4 GHz Core 2 Duo, (Memory) 1GB | Display Resolution | 1280 x 720 or higher | Connections |
| Power Requirements | USB Powered | Inputs |
|
| 1 x Microphone (6.35 mm, 1/4" Jack Socket) | Outputs |
|
| 1 x Master (Phono/RCA) |
| 2 x Headphone Monitor (3.5mm/1/4" Jack combination) |
| USB (MIDI Control) |
| 1 x Master (Phono/RCA) | Main Features |
| Included Software | Serato DJ Intro | USB Bus Powered | Yes | Soundcard | 24-bit/44.1 kHz | Plug and Play | Yes | Supported Audio Formats | MP3, OGG, AAC, M4A, ALAC, AIF, WAV | Performance Controls |
| Channels | 2 | Deck Control | 4 | Filter | High & Low Pass filter | Effects | 10 effects | Hot Cues | 4 | Autoloop | Yes | Manual Loop | Yes | Jog Wheel | Yes | Slip Mode | Yes | Talkover Function | Yes | Package Contents |
|
| 1 x DDJ-SB2 DJ Controller |
| 1 x USB Cable |
| 1 x CD-ROM Installation Disc |
| 1 x Quick Start Guide |
| The Reloop BeatMix 2 is a performance-oriented 2-channel pad controller for Serato. Both companies have teamed up, to develop a 'fun to use' 2-Channel controller for the worldwide popular DJ software Serato to work seamlessly plug 'n' play: Connect and start mixing.
Technical Data
-
- Input: 1x mic (6.3 mm jack)
- Output: 1x master out (stereo RCA), 2x headphones monitor out (3.5 mm & 6.3 mm jack)
- Dimensions: 492 x 317 x 35 mm
- Weight: 2,5 kg (net)
- Incl. Serato DJ INTRO, USB cord and quick start guide
System requirements Mac:
-
-
- Mac OS X 10.6.+ / 10.7.+ / 10.8.+ (Please check Serato.com for updates)
- 32-bit: Intel 2.0 GHz Core 2 Duo, 2 GB RAM
- 64-bit: Intel 2.4 GHz Core 2 Duo, 4 GB RAM
- If you have a large library, you will benefit from having more RAM
- Min. screen resolution 1280*720
- Available USB 2.0 port
System requirements Windows:
-
- Windows 7 (Please check Serato.com for updates)
- 32-bit: Intel 2.0 GHz Core 2 Duo, 2 GB RAM
- 64-bit: Intel 2,4 GHz Core 2 Duo, 4 GB RAM
- AMD processors are not recommended and officially not supported
- If you have a large library, you will benefit from having more RAM
- Min. screen resolution 1280*720
- Available USB 2.0 port
Features
- 2-Deck SERATO Performance PAD Controller
- Easy plug 'n' play: Simply connect to your computer and start mixing your tracks
- Performance pad section: 16x multi-colour drum pads for triggering loop-, sample- and hot cue-mode
- Colour-coded trigger pads give you visual feedback about mode and function
- Split mode: CUE and sampler mode can be combined
- Ergonomic and intuitive mixer/player design for optimal work flow
- Dedicated 3-band EQ control and gain control per channel
- SP-6 sample bank control with dedicated sampler volume fader
- Fader-start feature: Easy CUE control with the channel fader
- Quick-skip: Fast search within a track
- Slim-profile, big jog wheels with premium aluminium platters and superior scratching integration
- Control many, stunning DJ effects (FX engine by iZotope) with 2 FX units
- Integrated USB audio club interface
- 14-bit pitch fader with pitch bend control buttons
- Large transport section with stutter and sync controls
- Mouse-less playlist navigation
- 2x headphones connections on the front panel: 3.5 mm & 6.3 mm stereo jack incl. EQ control
- 6.3 mm jack mic input with volume control on the front panel
- SHIFT buttons for second layer control
- ASIO drivers (CORE compliant) with minimal latency and highest audio characteristics (PC/Mac)
- Seamless hardware integration for SERATO DJ & DJ INTRO
- MIDI-ready: Compatible with most popular DJ software
- USB bus powered: No power supply required!
|
Xone:4D is a unique DJ workstation combining a high quality analogue DJ mixer with extended software controller functionality. The 20-channel USB2 soundcard provides multiple routing options, enabling vast capabilities for live recording, sampling and playback. For the DJ who requires extended MIDI control of up to 4 software decks simultaneously, 4D is a luxurious hybrid controller to elevate your performance.
FEATURE SUMMARY
Mixer:
- 4 multi-input stereo channels
- Switchable phono or line input stages, RIAA preamps on 3 channels
- Soundcard output routing switches for each channel
- 3-band total kill EQ +6dB to off
- 2 FX sends, FX1 with pre/post selection
- 2 analogue VCF filters – low, band & high-pass, resonance, frequency and ‘on’ switch
- 2 stereo returns
- BPM LED display
- Headphone monitor (3.5mm and 1/4″ sockets) with mix/cue control
- Assignable LFO editable waveform
- Mic input on XLR with level control and 2-band EQ, routable directly to soundcard
USB 2.0 Soundcard:
- 20 channel 96 kHz/24-bit USB 2.0
- PC and Mac drivers
- 10 in/10 out (4 analogue + 1 digital stereo inputs and outputs)
- Soundcard inputs fed from mic, FX1, FX2, main mix or stereo channels 1-4 pre or post fade
MIDI Control:
- Total of 227 mappable MIDI messages can be sent from select mixer controls
- Shift mode function for double layer
- Compatible with any software that has MIDI assignable functions
- 105 MIDI controls, including dedicated MIDI sections containing:
- 8x60mm linear faders
- 16 detented rotary pots
- 50 switches
- 2 jog wheels
- 8 illuminated push switches
| Main Features
2 monophonic step sequencers
Up to 64 steps per sequence
Note, velocity and gate time settings per step
Note tie
16-track drum sequencer (one track per pad)
MIDI controller mode
Fully customizable for knobs, step buttons and velocity and pressure sensitive pads
Send MIDI CC, note data, program changes
16 Projects, each with 16x2 sequences, 16 drum sequences and a controller map.
Performance controls
Randomizer with Amount and Probability settings
Real-time looper/roller touch strip
Independent swing amount per sequence
Touch sensitive knobs
Tap Tempo
Connectivity
CV/GATE outputs (1 volt per octave CV, 10 volt gates)
8 drum gate outputs
Clock sync with multiple standards
MIDI In/Out with supplied MIDI adaptors
USB class compliant
Supports full parameter and sequencing editing capability using our free MIDI Control Center software
Kensington lock
Box contents
BestStep Pro Unit
Quick Start
Registration Card
2x MIDI adaptors
1x Clock adaptor
1x Anti groud-loop adaptor
Size & weight
Instrument size : 16.3 x 6.4 x 1.4 inches (415 x 163 x 36mm)
Instrument weight : 3.20 lbs. (1.450 Kg) | The vinyl experience is fully customizable with your favorite slipmat. With an all-metal body the TWELVE is built like a tank, but it has the agility of a sports car. It is truly battle-ready. With the TWELVE, the DJ can scratch and play with all the direct spontaneity and creativity of a turntablist, but with the precision, repeatability and durability of the best digitally-based solutions. The TWELVE is the very best of both. There is simply nothing else like it, anywhere.
- Full 12” vinyl with motorized platter to control playback
- Traditional, familiar turntable layout—no need to learn something new
- Strip Search with 8 hot-cue-triggers access
- 5.0 kfcm high-torque motor with high/low torque adjust for more traditional setups
- 4 decks of control so you can use one, two or more
- Extreme precision—3600 ticks of platter resolution for seamless performance
- MIDI interface via USB that can be connected to the SEVENTY-TWO or your computer
- 33 ¹/³ and 45 RPM platter speeds
- 8/16/50% pitch with precise dual-resolution detented slider
- Top panel rotary and traditional Motor Off switch allows traditional wind-down effects
- Serato DJ OSA-ready
|
- Eight Illuminated, Velocity Sensitive Performance Pads
- Dedicated Sampler Volume Slider
- Slip Mode Function Enables Continuous Music Playback in the Background Even When Loops and Hot Cues are Being Performed
- FX Knobs/Buttons for Operation of iZotope Effects
Overview
Designed for Serato® software users, specifically for "Serato DJ,” the DDJ-SP1 is a slim and compact sub-controller that uses multiple performance pads, controls, buttons, and knobs to trigger a variety of unique audio samples and effects. The DDJ-SP1 is designed to be the ideal companion to Pioneerʼs new DJM-900SRT mixer but can also be matched with other systems via its MIDI controller functionality.
Software
The DDJ-SP1 is made for Serato software users who want to add effects when using a professional DJ setup of two players and a mixer such as the DJM-900SRT. With the sub-controller, DJs can enhance their performances with multiple effects, similar to what\'s being done with our extremely popular DDJ-SX controller for Serato DJ. The DDJ-SP1 includes a free of charge download of a Serato Video plug-in (valued at more than $100). The plug-in is compatible with Serato DJ, Scratch Live and ITCH, that makes it extremely easy for users to insert video, effects and image files with music.
Serious Audio Effects
- Performance Pads – Sixteen Performance Pads on the sub-controller for seven different functions including Hot Loop, Auto Loop, Manual Loop, Hot Cue, Roll, Slicer, and Sampler. A "Sampler Velocity" function determines the output volume of the sample based on how hard the pads are struck. Each pad can be assigned as a hot cue point, and its blue illumination will signify its state of play for instant graphic feedback.
Sampler Volume Fader - In between the the performance pads is a volume slider to control output of the trigger pads. The convenient location of the slider enables quick volume adjustment during finger drum performances.
- Slip Mode – Pioneer included a Slip Mode function that enables continuous music playback in the background even when loops and hot cues are being performed. The functionality can also be used with players and controllers that support Serato DJ but not Slip Mode.
- FX Knobs/Buttons – The integrated knobs and buttons are arranged for Serato DJ software for operation of iZotope® effects.
Additional Features
- The sub-controller includes a free of charge download of Serato Video (valued at more than $100), a video control plug-in compatible with Serato DJ, Scratch Live and ITCH, that makes it extremely easy for users to insert video, effects and image files with music.
- USB connectivity and charging.
- DDJ-SP1 can be mounted on the X-Stand (T-U101), Pioneerʼs portable DJ stand (sold separately).
- Compact (12.9” x 7” x 1.8”) and weighs only three pounds, for easy transportation.
|
Reviews
There are no reviews yet.