POLK AUDIO TL1 CENTER HI-FI LOUDSPEAKER 10-125W PER CHANNEL -BLACK-

Driver Complements
Mid/Woofer    
Midrange     2 - 2 1/2" Diameter (6.35cm)
Dynamic Balance composite cone drivers
Tweeter     1 - 1/2" Diameter (1.27cm)
Silk polymer dome
Electrical
Overall Frequency Response     95Hz-22kHz
Lower -3dB Limit     125Hz dB
Upper -3dB Limit     20kHz dB
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     89 dB
Inputs     5-way binding posts
Dimensions
Cabinet Size     4" H x 15" W x 3 1/2" D
(10.16cm H x 38.10cm W x 8.89cm D)
Mounting Options     keyhole slots; .25 x 20 threaded inserts
Enclosure Type     Non-resonant composite w/time-aligned geometry and aperiodic tuned port
Shipping/Other
Product Weight     3.35 lbs. (1.52kgs)
Shipping unit:     each
Total Shipping Weight     4.05 lbs. (1.84kgs)
Speaker Warranty     5 years parts and labor (original purchaser)

Enclosure     Sealed/Ported
Tweeter     Ring Radiator
Midrange size (inches)     3-1/4
Woofer size (inches)     6-1/2
Connector Type     Post
Power Range     20-250
Sensitivity     88 dB
Impedance (Ohms)     8
Frequency Response     50-30k Hz
Height (inches)     9-1/16
Width (inches)     28-11/16
Depth (inches)     14
Weight     42.3 lbs
Parts Warranty     5 Years
Labor Warranty     5 Years

ALSO AVAILABLE IN "EBONY" COLOR

Driver Complements
Mid/Woofer     2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Midrange    
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response     90Hz-31kHz
Lower -3dB Limit     115Hz
Upper -3dB Limit     28kHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     90 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Cabinet Size     4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Mounting Options     keyhole slot; one .25 x 20 threaded insert
Enclosure Type     Steel-plate reinforced curved enclsoure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight     4.70 lbs. (2.13kgs)
Shipping unit:     each
Total Shipping Weight     5.50 lbs. (2.49kgs)
Speaker Warranty     5 years parts and labor (original purchaser)

HF unit
25mm neodymium tweeter with high dispersion diaphragm. Ferro fluid cooled and damped. Magnetically shielded.

MF unit
150mm mid range driver with 32mm coil, die-cast chassis, high-power, long-throw magnet system and light weight alloy cone. Magnetically shielded. 

LF unit 
150mm bass driver with 32mm coil, die-cast chassis, high-power, long-throw magnet system and light weight alloy cone. Magnetically shielded.

Power Handling  150W max

Frequency response +/-6db 55Hz to 23kHz

Sensitivity 90 db/W

Impedance 8 ohms

Cabinet Real wood veneered. 15mm MDF wrap with 30mm MDF front baffle. High power, low turbulence, front firing bass reflex ports.

Terminals Gold-plated 2-way binding posts.

Weight
(excl. packaging) 8kg

Dimensions
Width 530mm
Height 170mm
Depth 196 mm

Frequency Response

60Hz - 35KHz

Sensitivity

86dB

Nominal  Impedance

6 Ohms

Power Handling Single (RMS)

100 Watts

System Power Handling (RMS)

150 Watts

Recommended Amplifier Requirements

40-150 Watts

Maximum SPL (dBA)

106

Bass Alignment

Bass reflex - Rear ported

Driver complement

2 x 4” (100mm) C-CAM® cone bass/mid driver
1 x 1” (25mm) C-CAM gold dome tweeter

Cabinet Dimensions (H x W x D)

125 x 330 x 140mm
(415/16 x 13 x 51/2 Inches)

Cabinet Dimensions (H x W x D)(Inc Grille & Terminals)

125 x 330 x 164mm
(415/16 x 13 x 67/16 Inches)

Weight

3.6kg (7lb 14oz)

2 x 5 ¼ ¨ Polymer Composite Cone
with Rubber Surround
1 x 1¨Silk Polymer Dome Tweeter
Amplifier Power 20-180 W/ch
Impedance 8 Ohms
Sensitivity 89dB
Dimensions (cm) 17 x 50 x 22