POLK AUDIO OWM5 SURROUND LOUDSPEAKER PAIR

2 x 4 ½ ¨ Dynamic Balance
Polypropylene Driver
1 x 1¨ Silk Dome tweeter
Amplifier Power 20-150 W/ch
Impedance 8 Ohms
Sensitivity 91dB
Dimensions (cm) 16 x 40 x 10

Five discrete channels from one superb speaker
The perfect surround audio solution when you are unable or unwilling to
use rear channel speakers
Ultra slim design, only 1-5/8" (4cm) deep, perfect for ultra thin LED TVs
Wall mount bracket and table stand included
The dynamic punch, wide frequency range and broad dispersion of
full size speakers
Aircraft grade extruded Aluminum enclosure
Ten anodized Aluminum dome XTDD drivers
Three pure Aluminum dome tweeters
Frequency Response: 60Hz - 30kHz
Sensitivity: 90dB
Nominal Impedance: 8 Ohms
Dimensions: speaker only, not including
bracket: 114.3 x 4 x 13.2cm.

Frequency Response: C: 55 Hz - 35 KHz
L/R: 85Hz - 35KHz
Sensitivity (1W@1m): C: 90 dB
L/R: 87dB
Nominal Impedance: C: 8 Ohms
L/R: 8 Ohms
Power Handling Single (RMS): C: 100 W
L/R: 60 W
System Power Handling (RMS): C: 150 W
L/R: 100 W
Recommended Amplifier Requirements: C: 20 - 150 W
L/R: 10 - 100 W
Maximum SPL (dBA): 108
Bass Alignment: C: Bass reflex - front ported
L/R: Bass reflex - ported to the underside
Drive Unit Complement: 4 x 100mm (4“) MMP®II cone bass/mid driver.
3 x 25mm (1“) C-CAM® gold dome tweeter
External Dimensions
(H x W x D): mm (inches) 125 x 985 x 105 mm
(4 15/16 x 38 5/8 x 4 1/8)
Weight (each):
Kg (lbs) 8 (17 5/8)

User's Manual

Driver Complements
Satellites
Mid/Woofer     1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Center
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance composite ring radiator tweeter
Electrical
Overall Frequency
Response     85HZ - 31kHz
Lower -3dB Limit     110Hz
Upper -3dB Limit     28kHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     90 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Satellites
Cabinet Size     7 3/4" H x 4 1/2" W x 5 15/16" D
(19.68cm H x 11.43cm W x 15.08cm D)
Mounting Options     Included wall mount bracket; 1/4x20 threated insert
Enclosure Type     Steel-plate reinforced curved enclosure with PowerPort bass venting
Center
Cabinet Size     4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Weight     4.70 lbs. (2.13kgs)
Mounting Options     keyhole slots; .25 x 20 threaded inserts
Enclosure Type     Steel-plate reinforced curved enclosure with PowerPort Bass venting
Shipping/Other
Total Shipping Weight     20.30 lbs. (9.21kgs)
Speaker Warranty     5 years parts and labor (original purchaser)
Accessories
(comes with)    Satellite wall mount bracket

# The perfect speaker solution when you want big, high definition sound from compact, easy-to-use speakers
# Only 2-1/2 inches (6.4cm) deep for unobtrusive high performance
# Perfect appearance and timbre match for Mythos XTR series front speakers
# Bipolar driver array disperses surround sound over a wide area for enveloping effects
# Two high-definition XTDD 3-1/2 inch mid/bass drivers for life-like clarity
# Wall mount bracket and vertical table support stand included

Dimensions (mounted on wall without bracket) :11-7/8" H x 6" W x 2-1/2" D | 30.1cm H x 15.2cm W x 6.4cm D
Dimensions (mounted on wall with bracket) :11-7/8" H x 6" W x 2-9/16" D | 30.1cm H x 15.2cm W x 6.5cm D
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers in a bipolar array, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :100Hz - 30kHz
Sensitivity :90dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum, sealed
Product weight (without table stand) :
Supplied accessories :Wall mount bracket, adjustable support foot for vertical shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black