Content | Tweeter 1¨Silk/Polymer Dynamic Balance x1
Mid/Woofer 6 ½¨Dynamic Balance x 2
Bass Radiator 6 ½¨Dynamic x 2
Frequency Response 38Hz - 24kHz
Nominal Impedance 6 Ohms
Rec. Amplifier Power 20-100 Watts/Channel
Power Handling 150 Watts
Sensitivity 90dB
Dimensions (cm) 92.75 x 22.22 x 19.68
Key Features:
- The speaker is finished in a furniture-grade black oak finish that settles nicely into existing decor.
- The high sensitivity of the unit allows for maximum amplifier efficiency.
- The 1 - 1 ratio of the silk dome Dynamic Balance™ wave guide tweeter provides transparent, crystal-clear treble.
- 6.5" extended throw composite Dynamic Balance drivers create the open, uncoloured midrange and punchy, dynamic bass you crave.
- Get powerful output bass at the lowest frequencies from the two 6.5" mass-loaded composite sub bass radiators.
- The acoustically insert MDF cabinet construction with internal bracing
- 5-Way binding posts provide a stable base for these speakers.
- The base is integrated—no assembly required.
Detailed Specifications
Driver Complement:
- Mid/Woofer - Diameter: 6.5“; 2–6.5" Bass Radiator
- Mid/Woofer - Quantity: 1
- Tweeter - Diameter: 1“
- Tweeter - Quantity: 1
- Tweeter - Type: Wave Guide
Electrical:
- Efficiency: 90 dB
- Inputs: 5-Way Binding Posts
- Lower -3dB Limit: 40Hz
- Nominal Impedance: 6 ohms
- Recommended Amplifier Power: 20 – 100 W/Channel
- Total Frequency Response: 38Hz – 24kHz
- Upper -3dB Limit: 20kHz
- Crossover Frequency: 2-way
- Power Handling Peak: 150W
|
Room-filling sound without a room-filling speaker cabinet. Slimmer than ever before, the 684 S2 offers an amazing combination of floorstander power, audio performance and unbeatable value.
Switching to 5-inch bass/midrange drivers from the previous 6.5-inch cones, means the 684 S2 is now significantly slimmer than its predecessor, with simultaneously improved audio performance, thanks to Bowers & Wilkins innovation. The two Kevlar cone drivers benefit from smaller voice coils to increase sensitivity.
The 5-inch drivers now also feature Anti-Resonance Plug dustcaps, technology taken from our high-end PM1 speakers, that improve pistonic movement inside the voice coil. This helps to deliver amazingly distortion-free midrange performance, all in a smaller space.
As well as slimmer, improved driver performance, the 684 S2 also features a Decoupled Double Dome tweeter. Double dome technology, brought across from the CM10, increases tweeter rigidity for a more precise sound, while the tweeter sits in a gel-filled cavity, decoupled from the surrounding cabinet - which removes resonances and vibrations, for a more natural, spacious sound.
Woven Kevlar | Yes | Crossover Tuning | Yes | Nautilus Tapering Tube | Yes | Flowport | Yes | Technical features | Decoupled Double Dome aluminium tweeter with NautilusTM tube loading
Kevlar® brand fibre cone bass/midrange drivers
FlowportTM | Description | 2-way vented-box system | Drive units | 1x ø25mm (1 in) aluminium dome high-frequency
2x ø130mm (5 in) woven Kevlar® cone bass/
midrange | Frequency range | -6dB at 45Hz and 50kHz | Frequency response | 72Hz - 22kHz ±3dB on reference axis | Dispersion | Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc | Sensitivity | 87dB spl (2.83V, 1m) | Harmonic distortion | 2nd and 3rd harmonics (90dB, 1m)
|
|
Single Ported HiVe® II technology Sealed Mid-range TLE® 2 x 6.5” long-throw RDT® bass drivers 1 x 4” RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather. Finish options: Santos Rosewood veneer with clear gloss piano lacquer Ebony veneer with clear gloss piano lacquer Piano black gloss Optional dedicated floor stands are available Frequency Response: 35 Hz - 100 KHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 117.8 dBA Power Handling (RMS): 250 W Recommended Amplifier Requirements (RMS): 100 - 250 W Bass Alignment: Rear Ported HiVe®II technology Sealed Mid-range TLE® Mid / H.F Crossover Frequency: 3600 Hz Bass Low Pass Crossover Frequency: 600 Hz Drive Unit Complement: 2 x 6.5" long-throw RDT® bass drivers 1 x 4" RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer External Dimensions - Including Fixed Plinth (H x W x D): 998 x 360 x 375 mm (39 5/16 x 14 3/16 x 14 3/4 inches) Weight (each) Including Plinth: 33Kg (72.7 lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Recommended Usage Front Speakers
Type 3-Way Bass Reflex Design
Woofers Dual 8" PMD Cone
MidRange Driver 5" Cone With Waveguide Horn
Tweeters 1" Aluminum Dome With Waveguide Horn
Magnetic Shielding Yes
Twin Bass Reflex Ports Single Port
Gold-Plated Brass Extruded Terminals Bi-Wiring Terminals
Frequency Response 30 Hz - 35 kHz
Sensitivity 89 dB/2.83 V/1 m
Input Power (Maximum / Nominal) 250W / 100W
Impedance 6 Ohms
Product Dimensions (W x H x D) 10-7/8" x 43-5/16" x 15-3/8“
Product Weight (lbs. each) 53.7
|
PRICE PER SPEAKER
Specifications Recommended Usage | Front Speakers | Type | 3-Way Bass Reflex Design | Woofers | Dual 6-1/2" PMD Cone | MidRange Driver | 5" Cone With Waveguide Horn | Tweeters | 1" Aluminum Dome With Waveguide Horn | Magnetic Shielding | Yes | Twin Bass Reflex Ports | Single Port | Gold-Plated Brass Extruded Terminals | Bi-Wiring Terminals | Frequency Response | 30 Hz - 35 kHz | Sensitivity | 88 dB/2.83 V/1 m | Input Power (Maximum / Nominal) | 250W / 100W | Impedance | 6 Ohms | Product Dimensions (W x H x D) | 8-3/4" x 38-9/16" x 13-9/16“ | Product Weight (lbs. each) | 20 Kg
|
---|
| System Format: 3 Way
Frequency Response: 30 Hz - 60 kHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 116.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier Requirements (RMS): 100 - 200 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: L.F - M.F: 790 Hz
M.F - H.F: 2.3 kHz
Drive Unit Compliment: 2 x 6.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
1060 x 210 x 330 mm
(41 3/4 x 8 1/4 x 13 inch)
Weight (each) Excluding stands: 27.2 Kg (59.9 lbs) |
Reviews
There are no reviews yet.