POLK AUDIO T50 Floor speaker BLACK Pair

• The speaker is finished in a furniture-grade black oak finish that settles nicely into existing decor.
• The high sensitivity of the unit allows for maximum amplifier efficiency.
• The 1 - 1 ratio of the silk dome Dynamic Balance™ wave guide tweeter provides transparent, crystal-clear treble.
• 6.5" extended throw composite Dynamic Balance drivers create the open, uncoloured midrange and punchy, dynamic bass you crave.
• Get powerful output bass at the lowest frequencies from the two 6.5" mass-loaded composite sub bass radiators.
• The acoustically insert MDF cabinet construction with internal bracing
• 5-Way binding posts provide a stable base for these speakers.
• The base is integrated—no assembly required.

• Mid/Woofer - Diameter: 6.5“; 2–6.5" Bass Radiator
• Mid/Woofer - Quantity: 1
• Tweeter - Diameter: 1“
• Tweeter - Quantity: 1
• Tweeter - Type: Wave Guide

• Efficiency: 90 dB
• Inputs: 5-Way Binding Posts
• Lower -3dB Limit: 40Hz
• Nominal Impedance: 6 ohms
• Recommended Amplifier Power: 20 – 100 W/Channel
• Total Frequency Response: 38Hz – 24kHz
• Upper -3dB Limit: 20kHz
• Crossover Frequency: 2-way
• Power Handling Peak: 150W

System Format: 3 Way
Frequency Response: 30 Hz - 60 kHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 116.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier Requirements (RMS): 100 - 200 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: L.F - M.F: 790 Hz
M.F - H.F: 2.3 kHz
Drive Unit Compliment: 2 x 6.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

1060 x 210 x 330 mm
(41 3/4 x 8 1/4 x 13 inch)
Weight (each) Excluding stands: 27.2 Kg (59.9 lbs)

AVAILABLE IN SIX COLOR FINISHES

System Format: 3 Way
Frequency Response: 35 Hz - 60 kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 114.5 dBA
Power Handling (RMS): 150 W
Recommended Amplifier Requirements (RMS): 100 - 150 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: L.F - M.F: 400 Hz
M.F - H.F: 2.6 kHz
Drive Unit Compliment: 2 x 5.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

951 x 170 x 300 mm
(37 7/16 x 6 11/16 x 11 13/16 inch)
Weight (each) Excluding stands: 22.2 Kg (48.9 lbs)

Dimensions | Metric :7" W x 11" D x 35" H | 17.8 x 27.9 x 88.9 cm
Driver Complement :Two 1” pure aluminum dome tweeters; Two 5.25” high definition bass/midrange drivers
Frequency Response :25 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 175 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Inputs :One set of five way binding posts
Accessories :Feet; Isolation Spikes
Weight | Metric :42 lbs | 19.1 kg
Available Finishes :Piano-Gloss Black
Packaging :One to a carton
Warranty :5 Years

Dimensions | Metric :42" H x 8" W x 12-1/4" D | 106.7 x 20.3 x 31.1 cm
Driver Complement :Two 1" aluminum dome tweeters; Two 6-1/2" high definition bass/midrange drivers
Frequency Response :20Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 300 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Inputs :One set of 5 way binding posts
Available Finishes :Piano-Black Gloss
Accessories :Feet; Isolation Spikes
Packaging :One to a carton
Weight | Metric :57 lbs | 25.9 kg
Warranty :5 Years

Dimensions | Metric :4-1/16" W x 4-1/16" D x 39-1/4" H | 10.3 x 10.3 x 99.7 cm
Height with Base | Metric :40-1/8" | 101.9 cm
Accessories :Plastic Foot Tippers; Isolation Spikes
Frequency Response :40 Hz – 30 kHz
Base Dimensions | Metric :8-3/16” W x 8” D | 20.8 x 30.3 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 3-1/2" high definition midrange drivers; Two 3-1/2" high definition bass drivers; Two 3-1/2" pressure coupled bass radiators
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :120 Hz
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Tempered Glass
Packaging :One to a carton
Weight | Metric :23 lbs. | 10.4 kg
Warranty :5 Years