| Content |
In-Ceiling Audiophile Magic
RC60i's round profile looks just like a lighting fixture so it will blend into your ceiling without calling attention to itself. But they sound sooooo much better than your typical in-ceiling speakers that resemble a watering spout.
RC60i Features:
- Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets.
- RCi speakers utilize the "virtual enclosure" of your in-wall and in-ceiling space to enhance their bass response and smooth low frequency blending with the midrange.
- Lightweight and stiff blue polymer cones deliver excellent damping and bass response.
- Durable, computer-modeled, injection-molded butyl rubber surrounds suppress unwanted cone resonances for a lifetime of reliable sound.
- Aimable swivel tweeters for greater accuracy and more realistic imaging. (All models except RC6s.).
- Rustproof stainless steel hardware, durable butyl rubber surrounds and powder coated aluminum (in-ceiling) & painted steel (in-wall) grilles make RCi Series speakers suitable for high moisture areas like bathrooms or even under eaves of an enclosed porch. (RCi series are not suitable for exposed outdoor use).
- RCi speakers have paintable grilles and practically disappear into any room.
- RCi Series speakers are timbre-matched to other Polk speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.
| Dimensions - Cut-Out Diameter | 7 5/8 (19.37cm) " | | Dimensions - Mounting Depth (includes 1/2 drywall)“ | 2 3/8 (6.03cm) " | | Dimensions - Overall Depth | 2 7/8 (7.30cm) " | | Dimensions - Overall Diameter | 9 (22.86cm) " | | Dimensions - Pre-Construction Bracket | PB 60 | | Driver Complement Mid / Woofer - Diameter | 6 1/2 (16.51cm) " | | Driver Complement Mid / Woofer - Quantity | 1 | | Driver Complement Mid / Woofer - Type | Dynamic Balance driver with mineral-filled polymer cone and rubber surround | | Driver Complement Tweeter - Diameter | 3/4 (1.91cm) " | | Driver Complement Tweeter - Quantity | 1 | | Driver Complement Tweeter - Type | Dynamic Balance tweeter with metalized soft dome in ball-and-socket swivel mount | | Electrical - Efficiency | 89 dB | | Electrical - Inputs | Spring-loaded clips | | Electrical - Lower -3dB Limit | 60 Hz | | Electrical - Nominal Impedance | 8 ohms | | Electrical - Recommended Amplifier Power | 20 - 100 watts per channel | | Electrical - Total Frequency Response | 40Hz - 20kHz | | Electrical - Upper -3dB Limit | 20 kHz | | Shipping - Total Shipping Weight | 6 pounds | | Shipping - Unit of Measure | pair | | Warranty - Speaker Warranty | Lifetime |
|
1 x 6 ½ ¨ Mineral Filed Polymer Cone
2 x ¾ ¨ Soft Dome Tweeter
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 89dB
Dimensions (cm) 22 x 7
One Speaker with Dual Inputs
| * Driver Size (dual-cone) 200 mm (8 in)
* Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 97 dB
* Frequency Range (-10 dB) Driver/Grille Assembly: 50 Hz - 17 kHz
o Installed in CSS-BB backcan: 90 Hz - 17 kHz
* Coverage (2 kHz) 110°
* Driver Continuous Power Handling 20 Watts
* 100V Taps 10W, 5W, 2.5W
* 70V Taps 10W, 5W, 2.5W, 1.3W
* 25V Taps 10W, 5W, 2.5W, 1.3W
* Transformer Insertion Loss 1.5 dB Maximum
* Transformer Connection Bare wire
* Motor Mass 283 g (10 oz)
* Safety Agency: Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.
* Matching CSS Backcan CSS-BB8 (0.15 cu ft)
* Bolt Mounting Circle to Backcan 4 points on 286 mm / (11.25 in) diameter
* Cutout Diameter
o Open-back: 216 mm (8.5 in)
o In CSS-BB backcan 295 mm (11.7 in)
* Depth (behind grille) 73 mm (2.9 in)
* Grille Diameter 327 mm (12.9 in)
* Net Weight (ea) 1.58 kg (3.5 lb)
* Shipping Weight (ea) 2.25 kg (5.0 lb)
* Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan. |
Outer Flange Dimensions | Metric :15-1/2” W x 15-1/2” H | 39.4 x 39.4 cm
Cut Out Dimensions | Metric :14-3/8” W x 14-3/8” H | 36.5 x .36.5 cm
Depth from Flange | Metric :5-7/8” | 14.9 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 5-1/4" cast-basket bass/midrange drivers pressure coupled to two 6-1/2” bass radiators
Frequency Response :22 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :
Recommended Associated Amplifier Power :10 – 250 watts
A/V Receiver Crossover Setting :40 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Weight | Metric :22 lbs | 10 kg
Warranty :5 Years
| Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.
Specifications (8124):
Component: 100 mm (4 in) Full-Range
Frequency Range (-10 dB): 60 Hz – 18 kHz
Coverage: 130° conical
Sensitivity (2.83V@ 1m): 93 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 20 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 206 mm (8.1 in) diameter round baffle x 89 mm (3.75 in)
depth from back of baffle
Cutout Dimension: 175 mm diameter (6.9 in)
Net Weight: 1.2 kg (2.5 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8124C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums |
Most compact of the JBL ceiling speakers, the Control 24C contains a coaxially mounted 4" woofer and 3/4" titanium-coated tweeter, providing high-fidelity sound over an extremely wide coverage area.
Specifications:
- 80 Hz to 20 kHz frequency range (-10 dB)
- 80 watts continuous program power capacity
- 86 dB sensitivity (1W/1m)
- 16 ohms nominal impedance
- 130° conical coverage (polar)
- Steel back-can with removable locking connector
- Dimensions (height x diameter): 7.9" x 7.7" (200 x195 mm)
- Net Weights: 2.7 kg (6 lbs)
|
Reviews
There are no reviews yet.